diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-03-08 23:05:03 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-03-08 23:05:03 +0000 |
commit | 75d794ffc49c837547489255f8f0f5d79ec84498 (patch) | |
tree | 2b09280a26d4fdaecc9e9cf51ae9740491e50c00 /nuttx/configs/pic32-starterkit/ostest | |
parent | 6d8de0bdc5d9d895f7d65565bdb81f1b313655b0 (diff) | |
download | px4-nuttx-75d794ffc49c837547489255f8f0f5d79ec84498.tar.gz px4-nuttx-75d794ffc49c837547489255f8f0f5d79ec84498.tar.bz2 px4-nuttx-75d794ffc49c837547489255f8f0f5d79ec84498.zip |
Update PIC32 Ethernet driver from debugging (still does not work
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4465 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/pic32-starterkit/ostest')
-rw-r--r-- | nuttx/configs/pic32-starterkit/ostest/defconfig | 307 |
1 files changed, 294 insertions, 13 deletions
diff --git a/nuttx/configs/pic32-starterkit/ostest/defconfig b/nuttx/configs/pic32-starterkit/ostest/defconfig index b48bf042a..cd968afc7 100644 --- a/nuttx/configs/pic32-starterkit/ostest/defconfig +++ b/nuttx/configs/pic32-starterkit/ostest/defconfig @@ -194,9 +194,15 @@ CONFIG_PIC32MX_IOPORTG=y # (VBUSON pin is controlled by the USB module, but 0 (GPIO) otherwise. # CONFIG_PIC32MX_WDENABLE - Enabled watchdog on power up. Default 0 (watchdog # can be enabled later by software). +# CONFIG_PIC32MX_FETHIO: Ethernet I/O Pin Selection bit. 1 (or undefined)= +# Default Ethernet I/O Pins; 0=Alternate Ethernet I/O Pins +# CONFIG_PIC32MX_FMIIEN: Ethernet MII Enable bit. 1 (or undefined) = MII +# enabled; 0=RMII enabled # CONFIG_PIC32MX_DEBUGGER=2 CONFIG_PIC32MX_ICESEL=1 +CONFIG_PIC32MX_FETHIO=0 +CONFIG_PIC32MX_FMIIEN=0 # # PIC32MX specific serial device driver settings @@ -284,12 +290,10 @@ CONFIG_UART6_2STOP=0 # Automatically set if CONFIG_NET_IGMP is selected. # # Related DEVCFG3 Configuration Settings: -# CONFIG_PIC32MX_FETHIO: Ethernet I/O Pin Selection bit: -# 1 = Default Ethernet I/O Pins -# 0 = Alternate Ethernet I/O Pins -# CONFIG_PIC32MX_FMIIEN: Ethernet MII Enable bit -# 1 = MII enabled -# 0 = RMII enabled +# CONFIG_PIC32MX_FETHIO: Ethernet I/O Pin Selection bit. 1 (or undefined)= +# Default Ethernet I/O Pins; 0=Alternate Ethernet I/O Pins +# CONFIG_PIC32MX_FMIIEN: Ethernet MII Enable bit. 1 (or undefined) = MII +# enabled; 0=RMII enabled # CONFIG_PHY_KS8721=n CONFIG_PHY_DP83848C=y @@ -338,6 +342,10 @@ CONFIG_HAVE_LIBM=n # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with # debug symbols (needed for use with a debugger). +# CONFIG_HAVE_CXX - Enable support for C++ +# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support +# for initialization of static C++ instances for this architecture +# and for the selected toolchain (via up_cxxinitialize()). # CONFIG_MM_REGIONS - If the architecture includes multiple # regions of memory to allocate from, this specifies the # number of memory regions that the memory manager must @@ -457,7 +465,40 @@ CONFIG_SCHED_WAITPID=n CONFIG_SCHED_ATEXIT=n # -# Settings for nxflat +# System Logging +# +# CONFIG_SYSLOG - Enables the System Logging feature. +# CONFIG_RAMLOG - Enables the RAM logging feature +# CONFIG_RAMLOG_CONSOLE - Use the RAM logging device as a system console. +# If this feature is enabled (along with CONFIG_DEV_CONSOLE), then all +# console output will be re-directed to a circular buffer in RAM. This +# is useful, for example, if the only console is a Telnet console. Then +# in that case, console output from non-Telnet threads will go to the +# circular buffer and can be viewed using the NSH 'dmesg' command. +# CONFIG_RAMLOG_SYSLOG - Use the RAM logging device for the syslogging +# interface. If this feature is enabled (along with CONFIG_SYSLOG), +# then all debug output (only) will be re-directed to the circular +# buffer in RAM. This RAM log can be view from NSH using the 'dmesg' +# command. +# CONFIG_RAMLOG_NPOLLWAITERS - The number of threads than can be waiting +# for this driver on poll(). Default: 4 +# +# If CONFIG_RAMLOG_CONSOLE or CONFIG_RAMLOG_SYSLOG is selected, then the +# following may also be provided: +# +# CONFIG_RAMLOG_CONSOLE_BUFSIZE - Size of the console RAM log. Default: 1024 +# + +CONFIG_SYSLOG=n +CONFIG_RAMLOG=n +CONFIG_RAMLOG_CONSOLE=n +CONFIG_RAMLOG_SYSLOG=n +#CONFIG_RAMLOG_NPOLLWAITERS +#CONFIG_RAMLOG_CONSOLE_BUFSIZE + +# +# Settings for NXFLAT +# # CONFIG_NXFLAT. Enable support for the NXFLAT binary format. # This format will support execution of NuttX binaries located # in a ROMFS filesystem (see examples/nxflat). @@ -580,6 +621,15 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # +# Framebuffer driver options +# +CONFIG_FB_CMAP=n +CONFIG_FB_HWCURSOR=n +CONFIG_FB_HWCURSORIMAGE=n +#CONFIG_FB_HWCURSORSIZE +#CONFIG_FB_TRANSPARENCY + +# # Filesystem configuration # # CONFIG_FS_FAT - Enable FAT filesystem support @@ -702,19 +752,26 @@ CONFIG_MMCSD_HAVECARDDETECT=n # CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address # CONFIG_NET_STATISTICS - uIP statistics on or off # CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table # CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates +# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table +# CONFIG_NET_ARP_IPIN - Harvest IP/MAC address mappings from the ARP table +# from incoming IP packets. +# CONFIG_NET_MULTICAST - Outgoing multi-cast address support +# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when +# looking for duplicates # CONFIG_NET=n CONFIG_NET_NOINTS=n CONFIG_NET_MULTIBUFFER=y CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 +CONFIG_NSOCKET_DESCRIPTORS=10 CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 +CONFIG_NET_BUFSIZE=562 CONFIG_NET_TCP=n CONFIG_NET_TCP_CONNS=40 +#CONFIG_NET_TCP_READAHEAD_BUFSIZE +CONFIG_NET_NTCP_READAHEAD_BUFFERS=16 +CONFIG_NET_TCPBACKLOG=y CONFIG_NET_MAX_LISTENPORTS=40 CONFIG_NET_UDP=n CONFIG_NET_UDP_CHECKSUMS=y @@ -722,10 +779,12 @@ CONFIG_NET_UDP_CHECKSUMS=y CONFIG_NET_ICMP=n CONFIG_NET_ICMP_PING=n #CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y +CONFIG_NET_STATISTICS=n #CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 CONFIG_NET_BROADCAST=n +#CONFIG_NET_ARPTAB_SIZE=8 +CONFIG_NET_ARP_IPIN=n +CONFIG_NET_MULTICAST=n #CONFIG_NET_FWCACHE_SIZE=2 # @@ -737,6 +796,29 @@ CONFIG_NET_DHCP_LIGHT=n CONFIG_NET_RESOLV_ENTRIES=4 # +# FTP Server +# +# CONFIG_FTPD_VENDORID - The vendor name to use in FTP communications. +# Default: "NuttX" +# CONFIG_FTPD_SERVERID - The server name to use in FTP communications. +# Default: "NuttX FTP Server" +# CONFIG_FTPD_CMDBUFFERSIZE - The maximum size of one command. Default: +# 128 bytes. +# CONFIG_FTPD_DATABUFFERSIZE - The size of the I/O buffer for data +# transfers. Default: 512 bytes. +# CONFIG_FTPD_WORKERSTACKSIZE - The stacksize to allocate for each +# FTP daemon worker thread. Default: 2048 bytes. +# +# Other required configuration settings: Of course TCP networking support +# is required. But here are a couple that are less obvious: +# +# CONFIG_DISABLE_PTHREAD - pthread support is required +# CONFIG_DISABLE_POLL - poll() support is required +# +CONFIG_FTPD_CMDBUFFERSIZE=512 +CONFIG_FTPD_DATABUFFERSIZE=2048 + +# # USB Device Configuration # # CONFIG_USBDEV @@ -911,6 +993,156 @@ CONFIG_USBMSC_VERSIONNO=0x0399 CONFIG_USBMSC_REMOVABLE=y # +# Graphics related configuration settings +# +# CONFIG_NX +# Enables overall support for graphics library and NX +# CONFIG_NX_MULTIUSER +# Configures NX in multi-user mode +# CONFIG_NX_NPLANES +# Some YUV color formats requires support for multiple planes, +# one for each color component. Unless you have such special +# hardware, this value should be undefined or set to 1 +# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP, +# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP, +# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and +# CONFIG_NX_DISABLE_32BPP +# NX supports a variety of pixel depths. You can save some +# memory by disabling support for unused color depths. +# CONFIG_NX_PACKEDMSFIRST +# If a pixel depth of less than 8-bits is used, then NX needs +# to know if the pixels pack from the MS to LS or from LS to MS +# CONFIG_NX_LCDDRIVER +# By default, NX builds to use a framebuffer driver (see +# include/nuttx/fb.h). If this option is defined, NX will +# build to use an LCD driver (see include/nuttx/lcd/lcd.h). +# CONFIG_LCD_MAXPOWER - The full-on power setting for an LCD device. +# CONFIG_LCD_MAXCONTRAST - The maximum contrast value for an LCD device. +# CONFIG_NX_MOUSE +# Build in support for mouse input +# CONFIG_NX_KBD +# Build in support of keypad/keyboard input +# CONFIG_NXTK_BORDERWIDTH +# Specifies with with of the border (in pixels) used with +# framed windows. The default is 4. +# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2 +# Specify the colors of the border used with framed windows. +# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so +# is normally darker. The default is medium and dark grey, +# respectively +# CONFIG_NXTK_AUTORAISE +# If set, a window will be raised to the top if the mouse position +# is over a visible portion of the window. Default: A mouse +# button must be clicked over a visible portion of the window. +# CONFIG_NXFONTS_CHARBITS +# The number of bits in the character set. Current options are +# only 7 and 8. The default is 7. +# CONFIG_NXFONT_SANS17X22 +# This option enables support for a tiny, 17x22 san serif font +# (font ID FONTID_SANS17X22 == 14). +# CONFIG_NXFONT_SANS20X26 +# This option enables support for a tiny, 20x26 san serif font +# (font ID FONTID_SANS20X26 == 15). +# CONFIG_NXFONT_SANS23X27 +# This option enables support for a tiny, 23x27 san serif font +# (font ID FONTID_SANS23X27 == 1). +# CONFIG_NXFONT_SANS22X29 +# This option enables support for a small, 22x29 san serif font +# (font ID FONTID_SANS22X29 == 2). +# CONFIG_NXFONT_SANS28X37 +# This option enables support for a medium, 28x37 san serif font +# (font ID FONTID_SANS28X37 == 3). +# CONFIG_NXFONT_SANS39X48 +# This option enables support for a large, 39x48 san serif font +# (font ID FONTID_SANS39X48 == 4). +# CONFIG_NXFONT_SANS17X23B +# This option enables support for a tiny, 17x23 san serif bold font +# (font ID FONTID_SANS17X23B == 16). +# CONFIG_NXFONT_SANS20X27B +# This option enables support for a tiny, 20x27 san serif bold font +# (font ID FONTID_SANS20X27B == 17). +# CONFIG_NXFONT_SANS22X29B +# This option enables support for a small, 22x29 san serif bold font +# (font ID FONTID_SANS22X29B == 5). +# CONFIG_NXFONT_SANS28X37B +# This option enables support for a medium, 28x37 san serif bold font +# (font ID FONTID_SANS28X37B == 6). +# CONFIG_NXFONT_SANS40X49B +# This option enables support for a large, 40x49 san serif bold font +# (font ID FONTID_SANS40X49B == 7). +# CONFIG_NXFONT_SERIF22X29 +# This option enables support for a small, 22x29 font (with serifs) +# (font ID FONTID_SERIF22X29 == 8). +# CONFIG_NXFONT_SERIF29X37 +# This option enables support for a medium, 29x37 font (with serifs) +# (font ID FONTID_SERIF29X37 == 9). +# CONFIG_NXFONT_SERIF38X48 +# This option enables support for a large, 38x48 font (with serifs) +# (font ID FONTID_SERIF38X48 == 10). +# CONFIG_NXFONT_SERIF22X28B +# This option enables support for a small, 27x38 bold font (with serifs) +# (font ID FONTID_SERIF22X28B == 11). +# CONFIG_NXFONT_SERIF27X38B +# This option enables support for a medium, 27x38 bold font (with serifs) +# (font ID FONTID_SERIF27X38B == 12). +# CONFIG_NXFONT_SERIF38X49B +# This option enables support for a large, 38x49 bold font (with serifs) +# (font ID FONTID_SERIF38X49B == 13). +# +# NX Multi-user only options: +# +# CONFIG_NX_BLOCKING +# Open the client message queues in blocking mode. In this case, +# nx_eventhandler() will not return until a message is received and processed. +# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS +# Specifies the maximum number of messages that can fit in +# the message queues. No additional resources are allocated, but +# this can be set to prevent flooding of the client or server with +# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many +# messages are pre-allocated). +# +CONFIG_NX=n +CONFIG_NX_MULTIUSER=n +CONFIG_NX_NPLANES=1 +CONFIG_NX_DISABLE_1BPP=y +CONFIG_NX_DISABLE_2BPP=y +CONFIG_NX_DISABLE_4BPP=y +CONFIG_NX_DISABLE_8BPP=y +CONFIG_NX_DISABLE_16BPP=n +CONFIG_NX_DISABLE_24BPP=y +CONFIG_NX_DISABLE_32BPP=y +CONFIG_NX_PACKEDMSFIRST=n +CONFIG_NX_LCDDRIVER=y +CONFIG_LCD_MAXPOWER=1 +CONFIG_LCD_MAXCONTRAST=1 +CONFIG_NX_MOUSE=y +CONFIG_NX_KBD=y +#CONFIG_NXTK_BORDERWIDTH=4 +CONFIG_NXTK_BORDERCOLOR1=0xd69a +CONFIG_NXTK_BORDERCOLOR2=0xad55 +CONFIG_NXTK_AUTORAISE=n +CONFIG_NXFONT_SANS17X22=y +CONFIG_NXFONT_SANS20X26=n +CONFIG_NXFONT_SANS22X29=n +CONFIG_NXFONT_SANS23X27=n +CONFIG_NXFONT_SANS28X37=n +CONFIG_NXFONT_SANS17X23B=n +CONFIG_NXFONT_SANS20X27B=y +CONFIG_NXFONT_SANS22X29B=y +CONFIG_NXFONT_SANS28X37B=n +CONFIG_NXFONT_SANS40X49B=n +CONFIG_NXFONT_SERIF22X29=n +CONFIG_NXFONT_SERIF29X37=n +CONFIG_NXFONT_SERIF38X48=n +CONFIG_NXFONT_SERIF22X28B=n +CONFIG_NXFONT_SERIF27X38B=n +CONFIG_NXFONT_SERIF38X49B=n +CONFIG_NXFONTS_CHARBITS=7 +CONFIG_NX_BLOCKING=y +CONFIG_NX_MXSERVERMSGS=32 +CONFIG_NX_MXCLIENTMSGS=16 + +# # Settings for examples/uip # CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) @@ -1019,6 +1251,55 @@ CONFIG_NSH_MMCSDSLOTNO=0 CONFIG_NSH_MMCSDMINOR=0 # +# I2C tool settings +# +# CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command +# CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0). +# CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3) +# CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03) +# CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77) +# CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff) +# CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 1000000) +# +CONFIG_I2CTOOL_BUILTIN=y +CONFIG_I2CTOOL_MINBUS=1 +CONFIG_I2CTOOL_MAXBUS=4 +#CONFIG_I2CTOOL_MINADDR +#CONFIG_I2CTOOL_MAXADDR +#CONFIG_I2CTOOL_MAXREGADDR +CONFIG_I2CTOOL_DEFFREQ=100000 + +# +# Settings for examples/ftpd +# +# CONFIG_EXAMPLES_FTPD_PRIO - Priority of the FTP daemon. +# Default: SCHED_PRIORITY_DEFAULT +# CONFIG_EXAMPLES_FTPD_STACKSIZE - Stack size allocated for the +# FTP daemon. Default: 2048 +# CONFIG_EXAMPLES_FTPD_NONETINIT - Define to suppress configuration of the +# network by apps/examples/ftpd. You would need to suppress network +# configuration if the network is configuration prior to running the +# example. +# +# NSH always initializes the network so if CONFIG_NSH_BUILTIN_APPS is +# defined, so is CONFIG_EXAMPLES_FTPD_NONETINIT (se it does not explicitly +# need to be defined in that case): +# +# CONFIG_NSH_BUILTIN_APPS - Build the FTPD daemon example test as an +# NSH built-in function. By default the FTPD daemon will be built +# as a standalone application. +# +# If CONFIG_EXAMPLES_FTPD_NONETINIT is not defined, then the following may +# be specified to customized the network configuration: +# +# CONFIG_EXAMPLE_FTPD_NOMAC - If the hardware has no MAC address of its +# own, define this =y to provide a bogus address for testing. +# CONFIG_EXAMPLE_FTPD_IPADDR - The target IP address. Default 10.0.0.2 +# CONFIG_EXAMPLE_FTPD_DRIPADDR - The default router address. Default +# 10.0.0.1 +# CONFIG_EXAMPLE_FTPD_NETMASK - The network mask. Default: 255.255.255.0 + +# # Settings for examples/usbserial # # CONFIG_EXAMPLES_USBSERIAL_INONLY |