diff options
| author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-05-28 19:48:26 +0000 |
|---|---|---|
| committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-05-28 19:48:26 +0000 |
| commit | 2def040cb811a71cf5e59effb304c47897640b5a (patch) | |
| tree | d5af02e86fca6db39ff126655f20eb43ccacb13e /nuttx/configs/stm3220g-eval/dhcpd/defconfig | |
| parent | f01a56f6ca729b143cb2a65c108fac534bc76f10 (diff) | |
| download | px4-nuttx-2def040cb811a71cf5e59effb304c47897640b5a.tar.gz px4-nuttx-2def040cb811a71cf5e59effb304c47897640b5a.tar.bz2 px4-nuttx-2def040cb811a71cf5e59effb304c47897640b5a.zip | |
Bring STM3220G-EVAL board configurations to same level as STM3240G-EVAL
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4779 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/stm3220g-eval/dhcpd/defconfig')
| -rw-r--r-- | nuttx/configs/stm3220g-eval/dhcpd/defconfig | 12 |
1 files changed, 1 insertions, 11 deletions
diff --git a/nuttx/configs/stm3220g-eval/dhcpd/defconfig b/nuttx/configs/stm3220g-eval/dhcpd/defconfig index a054711c6..192628a5d 100644 --- a/nuttx/configs/stm3220g-eval/dhcpd/defconfig +++ b/nuttx/configs/stm3220g-eval/dhcpd/defconfig @@ -64,7 +64,7 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure # the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH_DMA - Support DMA initialization @@ -118,15 +118,6 @@ CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n CONFIG_STM32_JTAG_SW_ENABLE=n # -# On-chip CCM SRAM configuration -# -# CONFIG_STM32_CCMEXCLUDE - Exclude CCM SRAM from the HEAP. You would need -# to do this if DMA is enabled to prevent non-DMA-able CCM memory from -# being a part of the stack. -# -CONFIG_STM32_CCMEXCLUDE=y - -# # On-board FSMC SRAM configuration # # CONFIG_STM32_FSMC - Required. See below @@ -148,7 +139,6 @@ CONFIG_HEAP2_END=(0x64000000+(2*1024*1024)) # AHB1: CONFIG_STM32_CRC=n CONFIG_STM32_BKPSRAM=n -CONFIG_STM32_CCMDATARAM=n CONFIG_STM32_DMA1=n CONFIG_STM32_DMA2=n CONFIG_STM32_ETHMAC=y |