Updates the STM3220G-EVAL configurations

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4572 42af7a65-404d-4744-a932-0658087f49c3

5 files changed, 83 insertions, 1302 deletions

diff --git a/nuttx/configs/stm3220g-eval/telnetd/Make.defs b/nuttx/configs/stm3220g-eval/telnetd/Make.defs
index 77e2f951f..fae89d569 100644
--- a/nuttx/configs/stm3220g-eval/telnetd/Make.defs
+++ b/nuttx/configs/stm3220g-eval/telnetd/Make.defs
@@ -40,30 +40,57 @@ include ${TOPDIR}/.config
 ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
   # CodeSourcery under Windows
   CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
   WINTOOL = y
   ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
 endif
 ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
   # CodeSourcery under Linux
   CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
   ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
   MAXOPTIMIZATION = -O2
 endif
+ifeq ($(CONFIG_STM32_ATOLLIC_LITE),y)
+  # Atollic toolchain under Windows
+  CROSSDEV = arm-atollic-eabi-
+  ARCROSSDEV =
+  WINTOOL = y
+ifeq ($(CONFIG_ARCH_FPU),y)
+  ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+else
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+endif
+ifeq ($(CONFIG_STM32_ATOLLIC_PRO),y)
+  # Atollic toolchain under Windows
+  CROSSDEV = arm-atollic-eabi-
+  ARCROSSDEV = arm-atollic-eabi-
+  WINTOOL = y
+ifeq ($(CONFIG_ARCH_FPU),y)
+  ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+else
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+endif
 ifeq ($(CONFIG_STM32_DEVKITARM),y)
   # devkitARM under Windows
   CROSSDEV = arm-eabi-
+  ARCROSSDEV = arm-eabi-
   WINTOOL = y
   ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
 endif
 ifeq ($(CONFIG_STM32_RAISONANCE),y)
   # Raisonance RIDE7 under Windows
   CROSSDEV = arm-none-eabi-
+  ARCROSSDEV = arm-none-eabi-
   WINTOOL = y
   ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
 endif
 ifeq ($(CONFIG_STM32_BUILDROOT),y)
   # NuttX buildroot under Linux or Cygwin
   CROSSDEV = arm-elf-
+  ARCROSSDEV = arm-elf-
   ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
   MAXOPTIMIZATION = -Os
 endif
@@ -91,8 +118,8 @@ CC = $(CROSSDEV)gcc
 CXX = $(CROSSDEV)g++
 CPP = $(CROSSDEV)gcc -E
 LD = $(CROSSDEV)ld
-AR = $(CROSSDEV)ar rcs
-NM = $(CROSSDEV)nm
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
 OBJCOPY = $(CROSSDEV)objcopy
 OBJDUMP = $(CROSSDEV)objdump
 
diff --git a/nuttx/configs/stm3220g-eval/telnetd/defconfig b/nuttx/configs/stm3220g-eval/telnetd/defconfig
index c4e439cc1..152c6ca1f 100644
--- a/nuttx/configs/stm3220g-eval/telnetd/defconfig
+++ b/nuttx/configs/stm3220g-eval/telnetd/defconfig
@@ -94,6 +94,8 @@ CONFIG_ARCH_DMA=n
 #
 CONFIG_STM32_CODESOURCERYW=y
 CONFIG_STM32_CODESOURCERYL=n
+CONFIG_STM32_ATOLLIC_LITE=n
+CONFIG_STM32_ATOLLIC_PRO=n
 CONFIG_STM32_DEVKITARM=n
 CONFIG_STM32_RAISONANCE=n
 CONFIG_STM32_BUILDROOT=n
@@ -116,6 +118,29 @@ CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
 CONFIG_STM32_JTAG_SW_ENABLE=n
 
 #
+# On-chip CCM SRAM configuration
+#
+# CONFIG_STM32_CCMEXCLUDE - Exclude CCM SRAM from the HEAP.  You would need
+#   to do this if DMA is enabled to prevent non-DMA-able CCM memory from
+#   being a part of the stack.
+#
+
+#
+# On-board FSMC SRAM configuration
+#
+# CONFIG_STM32_FSMC - Required.  See below
+# CONFIG_MM_REGIONS - Required.  Must be 2 or 3 (see above)
+#
+# CONFIG_STM32_FSMC_SRAM=y - Indicates that SRAM is available via the
+#   FSMC (as opposed to an LCD or FLASH).
+# CONFIG_HEAP2_BASE - The base address of the SRAM in the FSMC address space
+# CONFIG_HEAP2_END - The end (+1) of the SRAM in the FSMC address space
+#
+CONFIG_STM32_FSMC_SRAM=y
+CONFIG_HEAP2_BASE=0x64000000
+CONFIG_HEAP2_END=(0x64000000+(2*1024*1024))
+  
+#
 #  Individual subsystems can be enabled:
 #
 # Individual subsystems can be enabled:
@@ -268,6 +293,8 @@ CONFIG_SSI_POLLWAIT=y
 #   mode for testing. The STM32 CAN driver does support loopback mode.
 # CONFIG_CAN1_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN1 is defined.
 # CONFIG_CAN2_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN2 is defined.
+# CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
+# CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
 #
 CONFIG_CAN=n
 CONFIG_CAN_EXTID=n
@@ -314,7 +341,7 @@ CONFIG_STM32_MII_MCO2=n
 CONFIG_STM32_RMII=n
 CONFIG_STM32_AUTONEG=y
 #CONFIG_STM32_ETHFD
-#CONFIG_STM32_ETH100MB
+#CONFIG_STM32_ETH100MBPS
 CONFIG_STM32_PHYSR=16
 CONFIG_STM32_PHYSR_SPEED=0x0002
 CONFIG_STM32_PHYSR_100MBPS=0x0000
@@ -362,7 +389,10 @@ CONFIG_HAVE_LIBM=n
 # CONFIG_DEBUG_VERBOSE - enables verbose debug output
 # CONFIG_DEBUG_SYMBOLS - build without optimization and with
 #   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
+# CONFIG_HAVE_CXX - Enable support for C++
+# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support
+#   for initialization of static C++ instances for this architecture
+#   and for the selected toolchain (via up_cxxinitialize()).
 # CONFIG_MM_REGIONS - If the architecture includes multiple
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
@@ -451,12 +481,13 @@ CONFIG_DEBUG_VERBOSE=n
 CONFIG_DEBUG_SYMBOLS=n
 CONFIG_DEBUG_NET=n
 CONFIG_HAVE_CXX=y
-CONFIG_MM_REGIONS=1
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_MM_REGIONS=2
 CONFIG_ARCH_LOWPUTC=y
 CONFIG_RR_INTERVAL=200
 CONFIG_SCHED_INSTRUMENTATION=n
 CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2011
+CONFIG_START_YEAR=2012
 CONFIG_START_MONTH=12
 CONFIG_START_DAY=6
 CONFIG_GREGORIAN_TIME=n
@@ -696,6 +727,9 @@ CONFIG_FS_WRITEBUFFER=n
 #   Default:  Medium
 # CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
 #   4-bit transfer mode.
+# CONFIG_MMCSD_MULTIBLOCK_DISABLE - Use only the single block transfer method.
+#   This setting is used to work around buggy drivers that cannot handle
+#   multiple block transfers.
 # CONFIG_MMCSD_MMCSUPPORT
 #   Enable support for MMC cards
 # CONFIG_MMCSD_HAVECARDDETECT
@@ -705,20 +739,7 @@ CONFIG_SDIO_DMA=n
 #CONFIG_SDIO_PRI=128
 #CONFIG_SDIO_DMAPRIO
 #CONFIG_SDIO_WIDTH_D1_ONLY
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
-
-#
-# SDIO-based MMC/SD driver
-#
-# CONFIG_SDIO_DMA
-#   SDIO driver supports DMA
-# CONFIG_MMCSD_MMCSUPPORT
-#   Enable support for MMC cards
-# CONFIG_MMCSD_HAVECARDDETECT
-#   SDIO driver card detection is 100% accurate
-#
-CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
 CONFIG_MMCSD_MMCSUPPORT=n
 CONFIG_MMCSD_HAVECARDDETECT=n
 
diff --git a/nuttx/configs/stm3220g-eval/telnetd/defconfig.bak b/nuttx/configs/stm3220g-eval/telnetd/defconfig.bak
deleted file mode 100644
index 76df8199d..000000000
--- a/nuttx/configs/stm3220g-eval/telnetd/defconfig.bak
+++ /dev/null
@@ -1,1281 +0,0 @@
-############################################################################
-# configs/stm3220g-eval/telnetd/defconfig
-#
-#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# architecture selection
-#
-# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
-#   processor architecture.
-# CONFIG_ARCH_family - for use in C code.  This identifies the
-#   particular chip family that the architecture is implemented
-#   in.
-# CONFIG_ARCH_architecture - for use in C code.  This identifies the
-#   specific architecture within the chip familyl.
-# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
-# CONFIG_ARCH_CHIP_name - For use in C code
-# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
-#   the board that supports the particular chip or SoC.
-# CONFIG_ARCH_BOARD_name - for use in C code
-# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
-# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
-# CONFIG_DRAM_SIZE - Describes the installed DRAM.
-# CONFIG_DRAM_START - The start address of DRAM (physical)
-# CONFIG_DRAM_END - Last address+1 of installed RAM
-# CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization
-# CONFIG_ARCH_FPU - The STM3220xxx supports a floating point unit (FPU)
-#   (But, unfortunately, GCC does not support it).
-# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
-#   stack. If defined, this symbol is the size of the interrupt
-#   stack in bytes.  If not defined, the user task stacks will be
-#   used during interrupt handling.
-# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
-# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
-# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
-# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
-# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
-#   cause a 100 second delay during boot-up.  This 100 second delay
-#   serves no purpose other than it allows you to calibrate
-#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
-#   the delay actually is 100 seconds.
-# CONFIG_ARCH_DMA - Support DMA initialization
-#
-CONFIG_ARCH=arm
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM3=y
-CONFIG_ARCH_CHIP=stm32
-CONFIG_ARCH_CHIP_STM32F207IG=y
-CONFIG_ARCH_BOARD=stm3220g-eval
-CONFIG_ARCH_BOARD_STM3220G_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=16717
-CONFIG_DRAM_SIZE=0x00030000
-CONFIG_DRAM_START=0x20000000
-CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_FPU=n
-CONFIG_ARCH_INTERRUPTSTACK=n
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=n
-
-#
-# Identify toolchain and linker options
-#
-CONFIG_STM32_CODESOURCERYW=y
-CONFIG_STM32_CODESOURCERYL=n
-CONFIG_STM32_DEVKITARM=n
-CONFIG_STM32_RAISONANCE=n
-CONFIG_STM32_BUILDROOT=n
-
-#
-# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
-#
-#   CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG
-#
-# JTAG Enable options:
-#
-#   CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
-#   CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
-#     but without JNTRST.
-#   CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
-#
-CONFIG_STM32_DFU=y
-CONFIG_STM32_JTAG_FULL_ENABLE=y
-CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n
-CONFIG_STM32_JTAG_SW_ENABLE=n
-
-#
-#  Individual subsystems can be enabled:
-#
-# Individual subsystems can be enabled:
-# AHB1:
-CONFIG_STM32_CRC=n
-CONFIG_STM32_BKPSRAM=n
-CONFIG_STM32_CCMDATARAM=n
-CONFIG_STM32_DMA1=n
-CONFIG_STM32_DMA2=n
-CONFIG_STM32_ETHMAC=y
-CONFIG_STM32_OTGHS=n
-# AHB2:
-CONFIG_STM32_DCMI=n
-CONFIG_STM32_CRYP=n
-CONFIG_STM32_HASH=n
-CONFIG_STM32_RNG=n
-CONFIG_STM32_OTGFS=n
-# AHB3:
-CONFIG_STM32_FSMC=n
-# APB1:
-CONFIG_STM32_TIM2=n
-CONFIG_STM32_TIM3=n
-CONFIG_STM32_TIM4=n
-CONFIG_STM32_TIM5=n
-CONFIG_STM32_TIM6=n
-CONFIG_STM32_TIM7=n
-CONFIG_STM32_TIM12=n
-CONFIG_STM32_TIM13=n
-CONFIG_STM32_TIM14=n
-CONFIG_STM32_WWDG=n
-CONFIG_STM32_SPI2=n
-CONFIG_STM32_SPI3=n
-CONFIG_STM32_USART2=n
-CONFIG_STM32_USART3=y
-CONFIG_STM32_UART4=n
-CONFIG_STM32_UART5=n
-CONFIG_STM32_I2C1=n
-CONFIG_STM32_I2C2=n
-CONFIG_STM32_I2C3=n
-CONFIG_STM32_CAN1=n
-CONFIG_STM32_CAN2=n
-CONFIG_STM32_DAC=n
-CONFIG_STM32_PWR=n
-# APB2:
-CONFIG_STM32_TIM1=n
-CONFIG_STM32_TIM8=n
-CONFIG_STM32_USART1=n
-CONFIG_STM32_USART6=n
-CONFIG_STM32_ADC1=n
-CONFIG_STM32_ADC2=n
-CONFIG_STM32_ADC3=n
-CONFIG_STM32_SDIO=n
-CONFIG_STM32_SPI1=n
-CONFIG_STM32_SYSCFG=y
-CONFIG_STM32_TIM9=n
-CONFIG_STM32_TIM10=n
-CONFIG_STM32_TIM11=n
-
-#
-# Timer and I2C devices may need to the following to force power to be applied:
-#
-#CONFIG_STM32_FORCEPOWER=y
-
-#
-# STM32F20xxx specific serial device driver settings
-#
-# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
-#   console and ttys0 (default is the USART1).
-# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
-#   This specific the size of the receive buffer
-# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
-#   being sent.  This specific the size of the transmit buffer
-# CONFIG_USARTn_BAUD - The configure BAUD of the UART.  Must be
-# CONFIG_USARTn_BITS - The number of bits.  Must be either 7 or 8.
-# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
-# CONFIG_USARTn_2STOP - Two stop bits
-#
-CONFIG_USART1_SERIAL_CONSOLE=n
-CONFIG_USART2_SERIAL_CONSOLE=n
-CONFIG_USART3_SERIAL_CONSOLE=y
-CONFIG_USART4_SERIAL_CONSOLE=n
-CONFIG_USART5_SERIAL_CONSOLE=n
-
-CONFIG_USART1_TXBUFSIZE=128
-CONFIG_USART2_TXBUFSIZE=128
-CONFIG_USART3_TXBUFSIZE=128
-CONFIG_USART4_TXBUFSIZE=128
-CONFIG_USART5_TXBUFSIZE=128
-
-CONFIG_USART1_RXBUFSIZE=128
-CONFIG_USART2_RXBUFSIZE=128
-CONFIG_USART3_RXBUFSIZE=128
-CONFIG_USART4_RXBUFSIZE=128
-CONFIG_USART5_RXBUFSIZE=128
-
-CONFIG_USART1_BAUD=115200
-CONFIG_USART2_BAUD=115200
-CONFIG_USART3_BAUD=115200
-CONFIG_USART4_BAUD=115200
-CONFIG_USART5_BAUD=115200
-
-CONFIG_USART1_BITS=8
-CONFIG_USART2_BITS=8
-CONFIG_USART3_BITS=8
-CONFIG_USART4_BITS=8
-CONFIG_USART5_BITS=8
-
-CONFIG_USART1_PARITY=0
-CONFIG_USART2_PARITY=0
-CONFIG_USART3_PARITY=0
-CONFIG_USART4_PARITY=0
-CONFIG_USART5_PARITY=0
-
-CONFIG_USART1_2STOP=0
-CONFIG_USART2_2STOP=0
-CONFIG_USART3_2STOP=0
-CONFIG_USART4_2STOP=0
-CONFIG_USART5_2STOP=0
-
-#
-# STM32F20xxx specific SSI device driver settings
-#
-# CONFIG_SSIn_DISABLE - select to disable all support for
-#   the SSI
-# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support
-#   Poll-waiting is recommended if the interrupt rate would be to
-#   high in the interrupt driven case.
-# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before
-#   emptying the Rx FIFO.  If the SPI frequency is high and this
-#   value is large, then larger values of this setting may cause
-#   Rx FIFO overrun errors.  Default: half of the Tx FIFO size (4).
-#
-CONFIG_SSI0_DISABLE=n
-CONFIG_SSI1_DISABLE=y
-CONFIG_SSI_POLLWAIT=y
-#CONFIG_SSI_TXLIMIT=4
-
-#
-# STM32F20xxx specific CAN device driver settings
-#
-# CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or
-#   CONFIG_STM32_CAN2 must also be defined)
-# CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID.  Default
-#   Standard 11-bit IDs.
-# CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages.
-#   Default: 8
-# CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests.
-#   Default: 4
-# CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback
-#   mode for testing. The STM32 CAN driver does support loopback mode.
-# CONFIG_CAN1_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN1 is defined.
-# CONFIG_CAN2_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN2 is defined.
-#
-CONFIG_CAN=n
-CONFIG_CAN_EXTID=n
-#CONFIG_CAN_FIFOSIZE
-#CONFIG_CAN_NPENDINGRTR
-CONFIG_CAN_LOOPBACK=n
-CONFIG_CAN1_BAUD=700000
-CONFIG_CAN2_BAUD=700000
-
-#
-# STM32F20xxx Ethernet device driver settings
-#
-# CONFIG_STM32_PHYADDR - The 5-bit address of the PHY on the board
-# CONFIG_STM32_MII - Support Ethernet MII interface
-# CONFIG_STM32_MII_MCO1 - Use MCO1 to clock the MII interface
-# CONFIG_STM32_MII_MCO2 - Use MCO2 to clock the MII interface
-# CONFIG_STM32_RMII - Support Ethernet RMII interface
-# CONFIG_STM32_AUTONEG - Use PHY autonegotion to determine speed and mode
-# CONFIG_STM32_ETHFD - If CONFIG_STM32_AUTONEG is not defined, then this
-#   may be defined to select full duplex mode. Default: half-duplex
-# CONFIG_STM32_ETH100MBPS - If CONFIG_STM32_AUTONEG is not defined, then this
-#   may be defined to select 100 MBps speed.  Default: 10 Mbps
-# CONFIG_STM32_PHYSR - This must be provided if CONFIG_STM32_AUTONEG is
-#   defined.  The PHY status register address may diff from PHY to PHY.  This
-#   configuration sets the address of the PHY status register.
-# CONFIG_STM32_PHYSR_SPEED - This must be provided if CONFIG_STM32_AUTONEG is
-#   defined.  This provides bit mask indicating 10 or 100MBps speed.
-# CONFIG_STM32_PHYSR_100MBPS - This must be provided if CONFIG_STM32_AUTONEG is
-#   defined.  This provides the value of the speed bit(s) indicating 100MBps speed.
-# CONFIG_STM32_PHYSR_MODE - This must be provided if CONFIG_STM32_AUTONEG is
-#   defined.  This provide bit mask indicating full or half duplex modes.
-# CONFIG_STM32_PHYSR_FULLDUPLEX - This must be provided if CONFIG_STM32_AUTONEG is
-#   defined.  This provides the value of the mode bits indicating full duplex mode.
-# CONFIG_STM32_ETH_PTP - Precision Time Protocol (PTP).  Not supported
-#   but some hooks are indicated with this condition.
-# CONFIG_STM32_ETHMAC_REGDEBUG - If CONFIG_DEBUG is also enabled, this will
-#   generate far more debug output than you could ever care to see unless you
-#   are debugging low-level Ethernet driver features.
-#
-CONFIG_STM32_PHYADDR=0x01
-CONFIG_STM32_MII=y
-CONFIG_STM32_MII_MCO1=y
-CONFIG_STM32_MII_MCO2=n
-CONFIG_STM32_RMII=n
-CONFIG_STM32_AUTONEG=y
-#CONFIG_STM32_ETHFD
-#CONFIG_STM32_ETH100MB
-CONFIG_STM32_PHYSR=16
-CONFIG_STM32_PHYSR_SPEED=0x0002
-CONFIG_STM32_PHYSR_100MBPS=0x0000
-CONFIG_STM32_PHYSR_MODE=0x0004
-CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004
-CONFIG_STM32_ETH_PTP=n
-CONFIG_STM32_ETHMAC_REGDEBUG=n
-
-#
-# I2C configuration
-#
-CONFIG_I2C=n
-CONFIG_I2C_POLLED=y
-CONFIG_I2C_TRANSFER=y
-CONFIG_I2C_TRACE=n
-
-#
-# General build options
-#
-# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
-#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
-# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
-#   used with many different loaders using the GNU objcopy program
-#   Should not be selected if you are not using the GNU toolchain.
-# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
-#   used with many different loaders using the GNU objcopy program
-#   Should not be selected if you are not using the GNU toolchain.
-# CONFIG_RAW_BINARY - make a raw binary format file used with many
-#   different loaders using the GNU objcopy program.  This option
-#   should not be selected if you are not using the GNU toolchain.
-# CONFIG_HAVE_LIBM - toolchain supports libm.a
-#
-CONFIG_RRLOAD_BINARY=n
-CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
-CONFIG_HAVE_LIBM=n
-
-#
-# General OS setup
-#
-# CONFIG_APPS_DIR - Identifies the relative path to the directory
-#   that builds the application to link with NuttX.  Default: ../apps
-# CONFIG_DEBUG - enables built-in debug options
-# CONFIG_DEBUG_VERBOSE - enables verbose debug output
-# CONFIG_DEBUG_SYMBOLS - build without optimization and with
-#   debug symbols (needed for use with a debugger).
-# CONFIG_HAVE_CXX - Enable support for C++S
-# CONFIG_MM_REGIONS - If the architecture includes multiple
-#   regions of memory to allocate from, this specifies the
-#   number of memory regions that the memory manager must
-#   handle and enables the API mm_addregion(start, end);
-# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
-#   time console output
-# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
-#   or MSEC_PER_TICK=10.  This setting may be defined to
-#   inform NuttX that the processor hardware is providing
-#   system timer interrupts at some interrupt interval other
-#   than 10 msec.
-# CONFIG_RR_INTERVAL - The round robin timeslice will be set
-#   this number of milliseconds;  Round robin scheduling can
-#   be disabled by setting this value to zero.
-# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
-#   scheduler to monitor system performance
-# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
-#   task name to save in the TCB.  Useful if scheduler
-#   instrumentation is selected.  Set to zero to disable.
-# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
-#   Used to initialize the internal time logic.
-# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
-#   You would only need this if you are concerned about accurate
-#   time conversions in the past or in the distant future.
-# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
-#   would only need this if you are concerned about accurate
-#   time conversion in the distand past.  You must also define
-#   CONFIG_GREGORIAN_TIME in order to use Julian time.
-# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
-#   provides /dev/console.  Enables stdout, stderr, stdin.
-# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
-#   driver (minimul support)
-# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
-#   errorcheck mutexes. Enables pthread_mutexattr_settype().
-# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
-#   inheritance on mutexes and semaphores. 
-# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
-#   inheritance is enabled.  It defines the maximum number of
-#   different threads (minus one) that can take counts on a
-#   semaphore with priority inheritance support.  This may be 
-#   set to zero if priority inheritance is disabled OR if you
-#   are only using semaphores as mutexes (only one holder) OR
-#   if no more than two threads participate using a counting
-#   semaphore.
-# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
-#   then this setting is the maximum number of higher priority
-#   threads (minus 1) than can be waiting for another thread
-#   to release a count on a semaphore.  This value may be set
-#   to zero if no more than one thread is expected to wait for
-#   a semaphore.
-# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
-#   by task_create() when a new task is started.  If set, all
-#   files/drivers will appear to be closed in the new task.
-# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
-#   three file descriptors (stdin, stdout, stderr) by task_create()
-#   when a new task is started. If set, all files/drivers will
-#   appear to be closed in the new task except for stdin, stdout,
-#   and stderr.
-# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
-#   desciptors by task_create() when a new task is started. If
-#   set, all sockets will appear to be closed in the new task.
-# CONFIG_SCHED_WORKQUEUE.  Create a dedicated "worker" thread to
-#  handle delayed processing from interrupt handlers.  This feature
-#  is required for some drivers but, if there are not complaints,
-#  can be safely disabled.  The worker thread also performs
-#  garbage collection -- completing any delayed memory deallocations
-#  from interrupt handlers.  If the worker thread is disabled,
-#  then that clean will be performed by the IDLE thread instead
-#  (which runs at the lowest of priority and may not be appropriate
-#  if memory reclamation is of high priority).  If CONFIG_SCHED_WORKQUEUE
-#  is enabled, then the following options can also be used:
-# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
-#  thread.  Default: 50
-# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
-#  work in units of microseconds.  Default: 50*1000 (50 MS).
-# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
-#  thread.  Default: CONFIG_IDLETHREAD_STACKSIZE.
-# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
-#  the worker thread.  Default: 4
-# CONFIG_SCHED_WAITPID - Enable the waitpid() API
-# CONFIG_SCHED_ATEXIT - Enabled the atexit() API
-#
-#CONFIG_APPS_DIR=
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_DEBUG_NET=n
-CONFIG_HAVE_CXX=y
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
-CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
-CONFIG_TASK_NAME_SIZE=0
-CONFIG_START_YEAR=2011
-CONFIG_START_MONTH=12
-CONFIG_START_DAY=6
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
-CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=y
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=50
-CONFIG_SCHED_WORKPERIOD=(50*1000)
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=4
-CONFIG_SCHED_WAITPID=y
-CONFIG_SCHED_ATEXIT=n
-
-#
-# Settings for NXFLAT
-#
-# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
-#  This format will support execution of NuttX binaries located
-#  in a ROMFS filesystem (see examples/nxflat).
-# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals
-#  with.  CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and
-#  CONFIG_DEBUG_BINFMT have to be defined or
-#  CONFIG_NXFLAT_DUMPBUFFER does nothing.
-# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table
-#  is ordered by symbol name
-#
-CONFIG_NXFLAT=n
-CONFIG_NXFLAT_DUMPBUFFER=n
-CONFIG_SYMTAB_ORDEREDBYNAME=y
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=y
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
-
-#
-# Misc libc settings
-#
-# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
-#   little smaller if we do not support fieldwidthes
-#
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
-
-#
-# Sizes of configurable things (0 disables)
-#
-# CONFIG_MAX_TASKS - The maximum number of simultaneously
-#   active tasks.  This value must be a power of two.
-# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
-#   of parameters that a task may receive (i.e., maxmum value
-#   of 'argc')
-# CONFIG_NPTHREAD_KEYS - The number of items of thread-
-#   specific data that can be retained
-# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
-#   descriptors (one for each open)
-# CONFIG_NFILE_STREAMS - The maximum number of streams that
-#   can be fopen'ed
-# CONFIG_NAME_MAX - The maximum size of a file name.
-# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
-#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
-# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
-#   (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
-#   to force automatic, line-oriented flushing the output buffer
-#   for putc(), fputc(), putchar(), puts(), fputs(), printf(),
-#   fprintf(), and vfprintf().  When a newline is encountered in
-#   the output string, the output buffer will be flushed.  This
-#   (slightly) increases the NuttX footprint but supports the kind
-#   of behavior that people expect for printf().
-# CONFIG_NUNGET_CHARS - Number of characters that can be
-#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
-# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
-#   structures.  The system manages a pool of preallocated
-#   message structures to minimize dynamic allocations
-# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
-#   a fixed payload size given by this settin (does not include
-#   other message structure overhead.
-# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
-#   can be passed to a watchdog handler
-# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
-#   structures.  The system manages a pool of preallocated
-#   watchdog structures to minimize dynamic allocations
-# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
-#   timer structures.  The system manages a pool of preallocated
-#   timer structures to minimize dynamic allocations.  Set to
-#   zero for all dynamic allocations.
-#
-CONFIG_MAX_TASKS=8
-CONFIG_MAX_TASK_ARGS=4
-CONFIG_NPTHREAD_KEYS=0
-CONFIG_NFILE_DESCRIPTORS=8
-CONFIG_NFILE_STREAMS=8
-CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=128
-CONFIG_STDIO_LINEBUFFER=y
-CONFIG_NUNGET_CHARS=0
-CONFIG_PREALLOC_MQ_MSGS=0
-CONFIG_MQ_MAXMSGSIZE=0
-CONFIG_MAX_WDOGPARMS=4
-CONFIG_PREALLOC_WDOGS=8
-CONFIG_PREALLOC_TIMERS=8
-
-#
-# Framebuffer driver options
-#
-CONFIG_FB_CMAP=n
-CONFIG_FB_HWCURSOR=n
-CONFIG_FB_HWCURSORIMAGE=n
-#CONFIG_FB_HWCURSORSIZE
-#CONFIG_FB_TRANSPARENCY
-
-#
-# Filesystem configuration
-#
-# CONFIG_FS_FAT - Enable FAT filesystem support
-# CONFIG_FAT_SECTORSIZE - Max supported sector size
-# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
-#   file name support.
-# CONFIG_FAT_LFN - Enable FAT long file names.  NOTE:  Microsoft claims
-#   patents on FAT long file name technology.  Please read the
-#   disclaimer in the top-level COPYING file and only enable this
-#   feature if you understand these issues.
-# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
-#   default, maximum long file name is 255 bytes.  This can eat up
-#   a lot of memory (especially stack space).  If you are willing
-#   to live with some non-standard, short long file names, then
-#   define this value.  A good choice would be the same value as
-#   selected for CONFIG_NAME_MAX which will limit the visibility
-#   of longer file names anyway.
-# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
-# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. 
-#   This must have one of the values of 0xff or 0x00.
-#   Default: 0xff.
-# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
-#   don't both with file chunks smaller than this number of data bytes.
-# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
-#   Default: 255.
-# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
-#   don't both with file chunks smaller than this number of data bytes.
-#   Default: 32.
-# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
-#   packing files together toward the end of the file or, if file are
-#   deleted at the end of the file, clean up can simply mean erasing
-#   the end of FLASH memory so that it can be re-used again.  However,
-#   doing this can also harm the life of the FLASH part because it can
-#   mean that the tail end of the FLASH is re-used too often. This
-#   threshold determines if/when it is worth erased the tail end of FLASH
-#   and making it available for re-use (and possible over-wear).
-#   Default: 8192.
-# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
-# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
-#   option will enable a limited form of memory mapping that is
-#   implemented by copying whole files into memory.
-#
-CONFIG_FS_FAT=n
-CONFIG_FAT_LCNAMES=y
-CONFIG_FAT_LFN=y
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
-
-#
-# SPI-based MMC/SD driver
-#
-# CONFIG_MMCSD_NSLOTS
-#   Number of MMC/SD slots supported by the driver
-# CONFIG_MMCSD_READONLY
-#   Provide read-only access (default is read/write)
-# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
-#   Default is 20MHz.
-#
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
-
-#
-# Block driver buffering
-#
-# CONFIG_FS_READAHEAD
-#   Enable read-ahead buffering
-# CONFIG_FS_WRITEBUFFER
-#   Enable write buffering
-#
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
-
-#
-# STM32 SDIO-based MMC/SD driver
-#
-# CONFIG_SDIO_DMA
-#   SDIO driver supports DMA
-# CONFIG_SDIO_PRI - Select SDIO interrupt prority.  Default: 128
-# CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
-#   Default:  Medium
-# CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
-#   4-bit transfer mode.
-# CONFIG_MMCSD_MMCSUPPORT
-#   Enable support for MMC cards
-# CONFIG_MMCSD_HAVECARDDETECT
-#   SDIO driver card detection is 100% accurate
-#
-CONFIG_SDIO_DMA=n
-#CONFIG_SDIO_PRI=128
-#CONFIG_SDIO_DMAPRIO
-#CONFIG_SDIO_WIDTH_D1_ONLY
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
-
-#
-# SDIO-based MMC/SD driver
-#
-# CONFIG_SDIO_DMA
-#   SDIO driver supports DMA
-# CONFIG_MMCSD_MMCSUPPORT
-#   Enable support for MMC cards
-# CONFIG_MMCSD_HAVECARDDETECT
-#   SDIO driver card detection is 100% accurate
-#
-CONFIG_SDIO_DMA=n
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
-
-#
-# TCP/IP and UDP support via uIP
-#
-# CONFIG_NET - Enable or disable all network features
-# CONFIG_NET_NOINTS - uIP not called from interrupt level.
-# CONFIG_NET_MULTIBUFFER - Use multiple input/output buffers (probably no)
-# CONFIG_NET_IPv6 - Build in support for IPv6
-# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
-# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
-# CONFIG_NET_BUFSIZE - uIP buffer size
-# CONFIG_NET_TCP - TCP support on or off
-# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
-# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
-# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
-# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
-#   accept() is called. The size of the backlog is selected when listen() is called.
-# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
-# CONFIG_NET_UDP - UDP support on or off
-# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
-# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
-# CONFIG_NET_ICMP - ICMP ping response support on or off
-# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
-# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
-# CONFIG_NET_STATISTICS - uIP statistics on or off
-# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
-# CONFIG_NET_BROADCAST - Broadcast support
-# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
-# CONFIG_NET_ARP_IPIN - Harvest IP/MAC address mappings from the ARP table
-#   from incoming IP packets.
-# CONFIG_NET_MULTICAST - Outgoing multi-cast address support
-# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when
-#   looking for duplicates
-#
-CONFIG_NET=y
-CONFIG_NET_NOINTS=n
-CONFIG_NET_MULTIBUFFER=y
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=10
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=y
-CONFIG_NET_TCP_CONNS=40
-#CONFIG_NET_TCP_READAHEAD_BUFSIZE
-CONFIG_NET_NTCP_READAHEAD_BUFFERS=8
-CONFIG_NET_TCPBACKLOG=n
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=y
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=n
-#CONFIG_NET_RECEIVE_WINDOW=
-CONFIG_NET_BROADCAST=n
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_ARP_IPIN=n
-CONFIG_NET_MULTICAST=n
-#CONFIG_NET_FWCACHE_SIZE=2
-
-#
-# UIP Network Utilities
-# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
-# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
-#
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
-
-#
-# RTC Configuration
-#
-# CONFIG_RTC - Enables general support for a hardware RTC.  Specific
-#   architectures may require other specific settings.
-# CONFIG_RTC_DATETIME - There are two general types of RTC:  (1) A simple
-#   battery backed counter that keeps the time when power is down, and (2)
-#    A full date / time RTC the provides the date and time information, often
-#   in BCD format.  If CONFIG_RTC_DATETIME is selected, it specifies this
-#   second kind of RTC. In this case, the RTC is used to "seed" the normal
-#   NuttX timer and the NuttX system timer provides for higher resoution
-#   time.
-# CONFIG_RTC_HIRES - If CONFIG_RTC_DATETIME not selected, then the simple,
-#   battery backed counter is used.  There are two different implementations
-#   of such simple counters based on the time resolution of the counter:
-#   The typical RTC keeps time to resolution of 1 second, usually
-#   supporting a 32-bit time_t value.  In this case, the RTC is used to
-#   "seed" the normal NuttX timer and the NuttX timer provides for higher
-#   resoution time. If CONFIG_RTC_HIRES is enabled in the NuttX configuration,
-#   then the RTC provides higher resolution time and completely replaces the
-#   system timer for purpose of date and time.
-# CONFIG_RTC_FREQUENCY - If CONFIG_RTC_HIRES is defined, then the frequency
-#  of the high resolution RTC must be provided.  If CONFIG_RTC_HIRES is
-#   not defined, CONFIG_RTC_FREQUENCY is assumed to be one.
-# CONFIG_RTC_ALARM - Enable if the RTC hardware supports setting of an
-#  alarm.  A callback function will be executed when the alarm goes off
-#
-CONFIG_RTC=n
-CONFIG_RTC_DATETIME=y
-CONFIG_RTC_HIRES=n
-CONFIG_RTC_FREQUENCY=n
-CONFIG_RTC_ALARM=n
-
-#
-# USB Device Configuration
-#
-# CONFIG_USBDEV
-#   Enables USB device support
-# CONFIG_USBDEV_ISOCHRONOUS
-#   Build in extra support for isochronous endpoints
-# CONFIG_USBDEV_DUALSPEED
-#   Hardware handles high and full speed operation (USB 2.0)
-# CONFIG_USBDEV_SELFPOWERED
-#   Will cause USB features to indicate that the device is
-#   self-powered
-# CONFIG_USBDEV_MAXPOWER
-#   Maximum power consumption in mA
-# CONFIG_USBDEV_TRACE
-#   Enables USB tracing for debug
-# CONFIG_USBDEV_TRACE_NRECORDS
-#   Number of trace entries to remember
-#
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
-
-#
-# USB Serial Device Configuration
-#
-# CONFIG_PL2303
-#   Enable compilation of the USB serial driver
-# CONFIG_PL2303_EPINTIN
-#   The logical 7-bit address of a hardware endpoint that supports
-#   interrupt IN operation
-# CONFIG_PL2303_EPBULKOUT
-#   The logical 7-bit address of a hardware endpoint that supports
-#   bulk OUT operation
-# CONFIG_PL2303_EPBULKIN
-#   The logical 7-bit address of a hardware endpoint that supports
-#   bulk IN operation
-# # CONFIG_PL2303_NWRREQS and CONFIG_PL2303_NRDREQS
-#   The number of write/read requests that can be in flight
-# CONFIG_PL2303_VENDORID and CONFIG_PL2303_VENDORSTR
-#   The vendor ID code/string
-# CONFIG_PL2303_PRODUCTID and CONFIG_PL2303_PRODUCTSTR
-#   The product ID code/string
-# CONFIG_PL2303_RXBUFSIZE and CONFIG_PL2303_TXBUFSIZE
-#   Size of the serial receive/transmit buffers
-#
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
-
-#
-# USB Storage Device Configuration
-#
-# CONFIG_USBMSC
-#   Enable compilation of the USB storage driver
-# CONFIG_USBMSC_EP0MAXPACKET
-#   Max packet size for endpoint 0
-# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN
-#   The logical 7-bit address of a hardware endpoints that support
-#   bulk OUT and IN operations
-# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS
-#   The number of write/read requests that can be in flight
-# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN
-#   The size of the buffer in each write/read request.  This
-#   value needs to be at least as large as the endpoint
-#   maxpacket and ideally as large as a block device sector.
-# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR
-#   The vendor ID code/string
-# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR
-#   The product ID code/string
-# CONFIG_USBMSC_REMOVABLE
-#   Select if the media is removable
-#
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
-
-#
-# Graphics related configuration settings
-#
-# CONFIG_NX
-#   Enables overall support for graphics library and NX
-# CONFIG_NX_MULTIUSER
-#   Configures NX in multi-user mode
-# CONFIG_NX_NPLANES
-#   Some YUV color formats requires support for multiple planes,
-#   one for each color component.  Unless you have such special
-#   hardware, this value should be undefined or set to 1
-# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP,
-# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP,
-# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and
-# CONFIG_NX_DISABLE_32BPP
-#   NX supports a variety of pixel depths.  You can save some
-#   memory by disabling support for unused color depths.
-# CONFIG_NX_PACKEDMSFIRST
-#   If a pixel depth of less than 8-bits is used, then NX needs
-#   to know if the pixels pack from the MS to LS or from LS to MS
-# CONFIG_NX_LCDDRIVER
-#   By default, NX builds to use a framebuffer driver (see
-#   include/nuttx/fb.h). If this option is defined, NX will
-#   build to use an LCD driver (see include/nuttx/lcd/lcd.h).
-# CONFIG_LCD_MAXPOWER - The full-on power setting for an LCD device.
-# CONFIG_LCD_MAXCONTRAST - The maximum contrast value for an LCD device.
-# CONFIG_NX_MOUSE
-#   Build in support for mouse input
-# CONFIG_NX_KBD
-#   Build in support of keypad/keyboard input
-# CONFIG_NXTK_BORDERWIDTH
-#   Specifies with with of the border (in pixels) used with
-#   framed windows.  The default is 4.
-# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2
-#   Specify the colors of the border used with framed windows.
-#   CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so
-#   is normally darker.  The default is medium and dark grey,
-#   respectively
-# CONFIG_NXTK_AUTORAISE
-#   If set, a window will be raised to the top if the mouse position
-#   is over a visible portion of the window.  Default: A mouse
-#   button must be clicked over a visible portion of the window.
-# CONFIG_NXFONTS_CHARBITS
-#   The number of bits in the character set.  Current options are
-#   only 7 and 8.  The default is 7.
-# CONFIG_NXFONT_SANS17X22
-#  This option enables support for a tiny, 17x22 san serif font
-#  (font ID FONTID_SANS17X22 == 14).
-# CONFIG_NXFONT_SANS20X26
-#  This option enables support for a tiny, 20x26 san serif font
-#  (font ID FONTID_SANS20X26 == 15).
-# CONFIG_NXFONT_SANS23X27
-#   This option enables support for a tiny, 23x27 san serif font
-#   (font ID FONTID_SANS23X27 == 1).
-# CONFIG_NXFONT_SANS22X29
-#   This option enables support for a small, 22x29 san serif font
-#   (font ID FONTID_SANS22X29 == 2).
-# CONFIG_NXFONT_SANS28X37
-#   This option enables support for a medium, 28x37 san serif font
-#   (font ID FONTID_SANS28X37 == 3).
-# CONFIG_NXFONT_SANS39X48
-#   This option enables support for a large, 39x48 san serif font
-#   (font ID FONTID_SANS39X48 == 4).
-# CONFIG_NXFONT_SANS17X23B
-#   This option enables support for a tiny, 17x23 san serif bold font
-#   (font ID FONTID_SANS17X23B == 16).
-# CONFIG_NXFONT_SANS20X27B
-#   This option enables support for a tiny, 20x27 san serif bold font
-#   (font ID FONTID_SANS20X27B == 17).
-# CONFIG_NXFONT_SANS22X29B
-#   This option enables support for a small, 22x29 san serif bold font
-#   (font ID FONTID_SANS22X29B == 5).
-# CONFIG_NXFONT_SANS28X37B
-#   This option enables support for a medium, 28x37 san serif bold font
-#   (font ID FONTID_SANS28X37B == 6).
-# CONFIG_NXFONT_SANS40X49B
-#   This option enables support for a large, 40x49 san serif bold font
-#   (font ID FONTID_SANS40X49B == 7).
-# CONFIG_NXFONT_SERIF22X29
-#   This option enables support for a small, 22x29 font (with serifs)
-#   (font ID FONTID_SERIF22X29 == 8).
-# CONFIG_NXFONT_SERIF29X37
-#   This option enables support for a medium, 29x37 font (with serifs)
-#   (font ID FONTID_SERIF29X37 == 9).
-# CONFIG_NXFONT_SERIF38X48
-#   This option enables support for a large, 38x48 font (with serifs)
-#   (font ID FONTID_SERIF38X48 == 10).
-# CONFIG_NXFONT_SERIF22X28B
-#   This option enables support for a small, 27x38 bold font (with serifs)
-#   (font ID FONTID_SERIF22X28B == 11).
-# CONFIG_NXFONT_SERIF27X38B
-#   This option enables support for a medium, 27x38 bold font (with serifs)
-#   (font ID FONTID_SERIF27X38B == 12).
-# CONFIG_NXFONT_SERIF38X49B
-#   This option enables support for a large, 38x49 bold font (with serifs)
-#   (font ID FONTID_SERIF38X49B == 13).
-#
-# NX Multi-user only options:
-#
-# CONFIG_NX_BLOCKING
-#   Open the client message queues in blocking mode.  In this case,
-#   nx_eventhandler()  will not return until a message is received and processed.
-# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS
-#   Specifies the maximum number of messages that can fit in
-#   the message queues.  No additional resources are allocated, but
-#   this can be set to prevent flooding of the client or server with
-#   too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many
-#   messages are pre-allocated).
-#
-CONFIG_NX=n
-CONFIG_NX_MULTIUSER=n
-CONFIG_NX_NPLANES=1
-CONFIG_NX_DISABLE_1BPP=y
-CONFIG_NX_DISABLE_2BPP=y
-CONFIG_NX_DISABLE_4BPP=y
-CONFIG_NX_DISABLE_8BPP=y
-CONFIG_NX_DISABLE_16BPP=n
-CONFIG_NX_DISABLE_24BPP=y
-CONFIG_NX_DISABLE_32BPP=y
-CONFIG_NX_PACKEDMSFIRST=n
-CONFIG_NX_LCDDRIVER=y
-CONFIG_LCD_MAXPOWER=1
-CONFIG_LCD_MAXCONTRAST=1
-CONFIG_NX_MOUSE=y
-CONFIG_NX_KBD=y
-#CONFIG_NXTK_BORDERWIDTH=4
-CONFIG_NXTK_BORDERCOLOR1=0xd69a
-CONFIG_NXTK_BORDERCOLOR2=0xad55
-CONFIG_NXTK_AUTORAISE=n
-CONFIG_NXFONT_SANS17X22=y
-CONFIG_NXFONT_SANS20X26=n
-CONFIG_NXFONT_SANS22X29=n
-CONFIG_NXFONT_SANS23X27=n
-CONFIG_NXFONT_SANS28X37=n
-CONFIG_NXFONT_SANS17X23B=n
-CONFIG_NXFONT_SANS20X27B=y
-CONFIG_NXFONT_SANS22X29B=y
-CONFIG_NXFONT_SANS28X37B=n
-CONFIG_NXFONT_SANS40X49B=n
-CONFIG_NXFONT_SERIF22X29=n
-CONFIG_NXFONT_SERIF29X37=n
-CONFIG_NXFONT_SERIF38X48=n
-CONFIG_NXFONT_SERIF22X28B=n
-CONFIG_NXFONT_SERIF27X38B=n
-CONFIG_NXFONT_SERIF38X49B=n
-CONFIG_NXFONTS_CHARBITS=7
-CONFIG_NX_BLOCKING=y
-CONFIG_NX_MXSERVERMSGS=32
-CONFIG_NX_MXCLIENTMSGS=16
-
-#
-# Settings for examples/uip
-#
-CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
-CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
-CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
-CONFIG_EXAMPLE_UIP_DHCPC=n
-
-#
-# Settings for examples/nettest
-#
-CONFIG_EXAMPLE_NETTEST_SERVER=n
-CONFIG_EXAMPLE_NETTEST_PERFORMANCE=y
-CONFIG_EXAMPLE_NETTEST_NOMAC=y
-CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
-CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
-CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
-CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
-
-#
-# Settings for examples/telnetd
-#
-# CONFIG_EXAMPLES_TELNETD_DAEMONPRIO - Priority of the Telnet daemon.
-#   Default: SCHED_PRIORITY_DEFAULT
-# CONFIG_EXAMPLES_TELNETD_DAEMONSTACKSIZE - Stack size allocated for the
-#   Telnet daemon. Default: 2048
-# CONFIG_EXAMPLES_TELNETD_CLIENTPRIO- Priority of the Telnet client.
-#   Default: SCHED_PRIORITY_DEFAULT
-# CONFIG_EXAMPLES_TELNETD_CLIENTSTACKSIZE - Stack size allocated for the
-#   Telnet client. Default: 2048
-# CONFIG_EXAMPLE_TELNETD_NOMAC - If the hardware has no MAC address of its
-#   own, define this =y to provide a bogus address for testing.
-# CONFIG_EXAMPLE_TELNETD_IPADDR - The target IP address.  Default 10.0.0.2
-# CONFIG_EXAMPLE_TELNETD_DRIPADDR - The default router address. Default
-#   10.0.0.1
-# CONFIG_EXAMPLE_TELNETD_NETMASK - The network mask.  Default: 255.255.255.0
-#
-CONFIG_EXAMPLES_TELNETD_DAEMONPRIO=128
-CONFIG_EXAMPLES_TELNETD_DAEMONSTACKSIZE=2048
-CONFIG_EXAMPLES_TELNETD_CLIENTPRIO=128
-CONFIG_EXAMPLES_TELNETD_CLIENTSTACKSIZE=2048
-CONFIG_EXAMPLE_TELNETD_NOMAC=y
-CONFIG_EXAMPLE_TELNETD_IPADDR=(10<<24|0<<16|0<<8|2)
-CONFIG_EXAMPLE_TELNETD_DRIPADDR=(10<<24|0<<16|0<<8|1)
-CONFIG_EXAMPLE_TELNETD_NETMASK=(255<<24|255<<16|255<<8|0)
-
-#
-# Settings for examples/ostest
-#
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
-
-#
-# Settings for apps/nshlib
-#
-# CONFIG_NSH_BUILTIN_APPS - Support external registered,
-#   "named" applications that can be executed from the NSH
-#   command line (see apps/README.txt for more information).
-# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
-# CONFIG_NSH_STRERROR - Use strerror(errno)
-# CONFIG_NSH_LINELEN - Maximum length of one command line
-# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
-# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
-# CONFIG_NSH_DISABLEBG - Disable background commands
-# CONFIG_NSH_ROMFSETC - Use startup script in /etc
-# CONFIG_NSH_CONSOLE - Use serial console front end
-# CONFIG_NSH_TELNET - Use telnetd console front end
-# CONFIG_NSH_ARCHINIT - Platform provides architecture
-#   specific initialization (nsh_archinitialize()).
-#
-# If CONFIG_NSH_TELNET is selected:
-# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
-# CONFIG_NSH_DHCPC - Obtain address using DHCP
-# CONFIG_NSH_IPADDR - Provides static IP address
-# CONFIG_NSH_DRIPADDR - Provides static router IP address
-# CONFIG_NSH_NETMASK - Provides static network mask
-# CONFIG_NSH_NOMAC - Use a bogus MAC address
-#
-# If CONFIG_NSH_ROMFSETC is selected:
-# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
-# CONFIG_NSH_INITSCRIPT - Relative path to init script
-# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
-# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
-# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
-# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
-# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
-# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
-#
-CONFIG_NSH_BUILTIN_APPS=n
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=y
-CONFIG_NSH_ARCHINIT=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=y
-CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
-CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
-CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT=/tmp
-
-#
-# Architecture-specific NSH options
-#
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
-
-#
-# I2C tool settings
-#
-# CONFIG_I2CTOOL_BUILTIN - Build the tools as an NSH built-in command
-# CONFIG_I2CTOOL_MINBUS - Smallest bus index supported by the hardware (default 0).
-# CONFIG_I2CTOOL_MAXBUS - Largest bus index supported by the hardware (default 3)
-# CONFIG_I2CTOOL_MINADDR - Minium device address (default: 0x03)
-# CONFIG_I2CTOOL_MAXADDR - Largest device address (default: 0x77)
-# CONFIG_I2CTOOL_MAXREGADDR - Largest register address (default: 0xff)
-# CONFIG_I2CTOOL_DEFFREQ - Default frequency (default: 1000000)
-#
-CONFIG_I2CTOOL_BUILTIN=y
-CONFIG_I2CTOOL_MINBUS=1
-CONFIG_I2CTOOL_MAXBUS=3
-#CONFIG_I2CTOOL_MINADDR
-#CONFIG_I2CTOOL_MAXADDR
-#CONFIG_I2CTOOL_MAXREGADDR
-CONFIG_I2CTOOL_DEFFREQ=100000
-
-#
-# Settings for examples/usbserial
-#
-# CONFIG_EXAMPLES_USBSERIAL_INONLY
-#    Only verify IN (device-to-host) data transfers.  Default: both
-# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
-#    Only verify OUT (host-to-device) data transfers.  Default: both
-# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
-#    Send only small, single packet messages.  Default: Send large and small.
-# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
-#    Send only large, multi-packet messages.  Default: Send large and small.
-#
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
-
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
-
-#
-# Stack and heap information
-#
-# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
-#   operation from FLASH but must copy initialized .data sections to RAM.
-#   (should also be =n for the STM3220G-EVAL which always runs from flash)
-# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
-#   but copy themselves entirely into RAM for better performance.
-# CONFIG_CUSTOM_STACK - The up_ implementation will handle
-#   all stack operations outside of the nuttx model.
-# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
-# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
-#  This is the thread that (1) performs the inital boot of the system up
-#  to the point where user_start() is spawned, and (2) there after is the
-#  IDLE thread that executes only when there is no other thread ready to
-#  run.
-# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
-#  for the main user thread that begins at the user_start() entry point.
-# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
-# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
-# CONFIG_HEAP_BASE - The beginning of the heap
-# CONFIG_HEAP_SIZE - The size of the heap
-#
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_CUSTOM_STACK=n
-CONFIG_STACK_POINTER=
-CONFIG_IDLETHREAD_STACKSIZE=1024
-CONFIG_USERMAIN_STACKSIZE=2048
-CONFIG_PTHREAD_STACK_MIN=256
-CONFIG_PTHREAD_STACK_DEFAULT=2048
-CONFIG_HEAP_BASE=
-CONFIG_HEAP_SIZE=
-
-# Application configuration
-
-CONFIG_APPS_DIR="../apps"
diff --git a/nuttx/configs/stm3220g-eval/telnetd/ld.script b/nuttx/configs/stm3220g-eval/telnetd/ld.script
index f7f48769e..40ab6eada 100644
--- a/nuttx/configs/stm3220g-eval/telnetd/ld.script
+++ b/nuttx/configs/stm3220g-eval/telnetd/ld.script
@@ -33,7 +33,7 @@
  *
  ****************************************************************************/
 
-/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
+/* The STM32F207IGH6U has 1024Kb of FLASH beginning at address 0x0800:0000 and
  * 192Kb of SRAM. SRAM is split up into three blocks:
  *
  * 1) 112Kb of SRAM beginning at address 0x2000:0000
@@ -72,6 +72,12 @@ SECTIONS
 		_etext = ABSOLUTE(.);
 	} > flash
 
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
 	__exidx_start = ABSOLUTE(.);
 	.ARM.exidx : {
 		*(.ARM.exidx*)
diff --git a/nuttx/configs/stm3220g-eval/telnetd/setenv.sh b/nuttx/configs/stm3220g-eval/telnetd/setenv.sh
index e9c070efa..68903d175 100755
--- a/nuttx/configs/stm3220g-eval/telnetd/setenv.sh
+++ b/nuttx/configs/stm3220g-eval/telnetd/setenv.sh
@@ -57,6 +57,14 @@ fi
 # the CodeSourcery toolchain in any other location
 export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
 
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
 # This the Cygwin path to the location where I build the buildroot
 # toolchain.
 #export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"