In progress changes for OLED display work

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2669 42af7a65-404d-4744-a932-0658087f49c3

18 files changed, 464 insertions, 53 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index 571e336ca..8ed09d3ef 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -1126,4 +1126,6 @@
 
 5.6 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
 
-	* drivers/lcd/p14201.c - Driver for RiT P14201 series OLED.
+	* drivers/lcd/p14201.c - Driver for RiT P14201 series 128x96 4-bit OLED.
+	* configs/lm3s6965-ek/nx - NX graphics configuration for the LM3S6965
+	  Ethernet Evaluation Kit.
diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html
index e454ffd39..05b31b4b1 100644
--- a/nuttx/Documentation/NuttX.html
+++ b/nuttx/Documentation/NuttX.html
@@ -8,7 +8,7 @@
   <tr align="center" bgcolor="#e4e4e4">
     <td>
       <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
-      <p>Last Updated: May 10, 2010</p>
+      <p>Last Updated: May 12, 2010</p>
     </td>
   </tr>
 </table>
@@ -1749,7 +1749,9 @@ buildroot-1.8 2009-12-21 &lt;spudmonkey@racsa.co.cr&gt;
 <ul><pre>
 nuttx-5.6 2010-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 
-	* drivers/lcd/p14201.c - Driver for RiT P14201 series OLED.
+	* drivers/lcd/p14201.c - Driver for RiT P14201 series 128x96 4-bit OLED.
+	* configs/lm3s6965-ek/nx - NX graphics configuration for the LM3S6965
+	  Ethernet Evaluation Kit.
 
 pascal-2.1 2010-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 
diff --git a/nuttx/Documentation/NuttxPortingGuide.html b/nuttx/Documentation/NuttxPortingGuide.html
index fa7646e17..020d667fe 100644
--- a/nuttx/Documentation/NuttxPortingGuide.html
+++ b/nuttx/Documentation/NuttxPortingGuide.html
@@ -12,7 +12,7 @@
       <h1><big><font color="#3c34ec">
         <i>NuttX RTOS Porting Guide</i>
       </font></big></h1>
-      <p>Last Updated: April 19, 2010</p>
+      <p>Last Updated: May 13, 2010</p>
     </td>
   </tr>
 </table>
@@ -2483,7 +2483,21 @@ extern void up_ledoff(int led);
   </li>
 </ul>
 
-<h2>SPI-based MMC/SD driver</h2>
+<h2>Device Drivers</h2>
+<h3>SPI driver</h3>
+<ul>
+  <li>
+    <code>CONFIG_SPI_OWNBUS - Set if there is only one active device
+    on the SPI bus.  No locking or SPI configuration will be performed.
+    It is not necessary for clients to lock, re-configure, etc..
+  </li>
+  <li>
+    <code>CONFIG_SPI_EXCHANGE</code>: Driver supports a single exchange method
+    (vs a recvblock() and sndblock ()methods)
+  </li>
+</ul>
+
+<h3>SPI-based MMC/SD driver</h3>
 <ul>
   <li>
     <code>CONFIG_MMCSD_NSLOTS</code>: Number of MMC/SD slots supported by the driver. Default is one.
@@ -2496,7 +2510,7 @@ extern void up_ledoff(int led);
   </li>
 </ul>
 
-<h2>SDIO-based MMC/SD driver</h2>
+<h3>SDIO-based MMC/SD driver</h3>
 <ul>
   <li>
     <code>CONFIG_FS_READAHEAD</code>: Enable read-ahead buffering
@@ -2515,8 +2529,59 @@ extern void up_ledoff(int led);
   </li>
 </ul>
 
+<h3>RiT P14201 OLED driver</h3>
+<ul>
+  <li>
+    <code>CONFIG_LCD_P14201</code>: Enable P14201 support
+  </li>
+  <li>
+    <code>CONFIG_P14201_SPIMODE</code>: Controls the SPI mode
+  </li>
+  <li>
+    <code>CONFIG_P14201_FREQUENCY</code>: Define to use a different bus frequency
+  </li>
+  <li>
+    <code>CONFIG_P14201_NINTERFACES</code>:
+      Specifies the number of physical P14201 devices that will be supported.
+  </li>
+  <li>
+    <code>CONFIG_P14201_FRAMEBUFFER</code>:
+      If defined, accesses will be performed using an in-memory copy of the OLEDs GDDRAM.
+      This cost of this buffer is 128 * 96 / 2 = 6Kb.
+      If this is defined, then the driver will be fully functioned.
+      If not, then it will have the following limitations:
+      <ul>
+        <li>Reading graphics memory cannot be supported, and</li>
+        <li>All pixel writes must be aligned to byte boundaries.</li>
+      </ul>
+  </li>
+</ul>
+
+<h3>ENC28J60 Ethernet Driver Configuration Settings</h3>
+<ul>
+  <li>
+    <code>CONFIG_NET_ENC28J60</code>: Enabled ENC28J60 support
+  </li>
+  <li>
+    <code>CONFIG_ENC28J60_SPIMODE</code>: Controls the SPI mode
+  </li>
+  <li>
+    <code>CONFIG_ENC28J60_FREQUENCY</code>: Define to use a different bus frequency
+  </li>
+  <li>
+    <code>CONFIG_ENC28J60_NINTERFACES</code>:
+      Specifies the number of physical ENC28J60 devices that will be supported.
+  </li>
+  <li>
+    <code>CONFIG_ENC28J60_STATS</code>: Collect network statistics
+  </li>
+  <li>
+    <code>CONFIG_ENC28J60_HALFDUPPLEX</code>: Default is full duplex
+  </li>
+</ul>
+
 <h2>Network Support</h2>
-<h3>TCP/IP and UDP support via uIP</h2>
+<h3>TCP/IP and UDP support via uIP</h3>
 <ul>
   <li>
     <code>CONFIG_NET</code>: Enable or disable all network features
diff --git a/nuttx/TODO b/nuttx/TODO
index 2afd1d490..87dd3ed89 100644
--- a/nuttx/TODO
+++ b/nuttx/TODO
@@ -1,4 +1,4 @@
-NuttX TODO List (Last updated May 8, 2010)
+NuttX TODO List (Last updated May 14, 2010)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
   (5)  Task/Scheduler (sched/)
@@ -11,7 +11,7 @@ NuttX TODO List (Last updated May 8, 2010)
   (5)  Network Utilities (netutils/)
   (1)  USB (drivers/usbdev)
   (5)  Libraries (lib/)
- (11)  File system/Generic drivers (fs/, drivers/)
+ (12)  File system/Generic drivers (fs/, drivers/)
   (3)  Graphics subystem (graphics/)
   (1)  Pascal add-on (pcode/)
   (1)  Documentation (Documentation/)
@@ -409,6 +409,11 @@ o File system / Generic drivers (fs/, drivers/)
   Status:      Open
   Priority:    Low
 
+  Description: ENC28J60 driver is complete, but untested (I still haven't got
+               a good ENC28J60 test platform).
+  Status:      Open
+  Priority:    Low
+
 o Graphics subystem (graphics/)
   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
diff --git a/nuttx/arch/arm/src/imx/imx_spi.c b/nuttx/arch/arm/src/imx/imx_spi.c
index 0a7ca9af0..578e274cd 100755
--- a/nuttx/arch/arm/src/imx/imx_spi.c
+++ b/nuttx/arch/arm/src/imx/imx_spi.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * arch/arm/src/imx/imx_spi.c
  *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -166,6 +166,9 @@ static int    spi_interrupt(int irq, void *context);
 
 /* SPI methods */
 
+#ifndef CONFIG_SPI_OWNBUS
+static int    spi_lock(FAR struct spi_dev_s *dev, bool lock);
+#endif
 static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency);
 static void   spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode);
 static void   spi_setbits(FAR struct spi_dev_s *dev, int nbits);
@@ -186,7 +189,9 @@ static void   spi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t
 
 static const struct spi_ops_s g_spiops =
 {
-  .lock         = 0,                /* Not yet implemented */
+#ifndef CONFIG_SPI_OWNBUS
+  .lock         = spi_lock,
+#endif
   .select       = imx_spiselect,    /* Provided externally by board logic */
   .setfrequency = spi_setfrequency,
   .setmode      = spi_setmode,
@@ -673,6 +678,36 @@ static int spi_interrupt(int irq, void *context)
 #endif
 
 /****************************************************************************
+ * Name: spi_lock
+ *
+ * Description:
+ *   On SPI busses where there are multiple devices, it will be necessary to
+ *   lock SPI to have exclusive access to the busses for a sequence of
+ *   transfers.  The bus should be locked before the chip is selected. After
+ *   locking the SPI bus, the caller should then also call the setfrequency,
+ *   setbits, and setmode methods to make sure that the SPI is properly
+ *   configured for the device.  If the SPI buss is being shared, then it
+ *   may have been left in an incompatible state.
+ *
+ * Input Parameters:
+ *   dev  - Device-specific state data
+ *   lock - true: Lock spi bus, false: unlock SPI bus
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifndef CONFIG_SPI_OWNBUS
+static int spi_lock(FAR struct spi_dev_s *dev, bool lock)
+{
+  /* Not implemented */
+
+  return -ENOSYS;
+}
+#endif
+
+/****************************************************************************
  * Name: spi_setfrequency
  *
  * Description:
diff --git a/nuttx/arch/arm/src/lm3s/lm3s_ssi.c b/nuttx/arch/arm/src/lm3s/lm3s_ssi.c
index bbe04bd1b..73b995671 100755
--- a/nuttx/arch/arm/src/lm3s/lm3s_ssi.c
+++ b/nuttx/arch/arm/src/lm3s/lm3s_ssi.c
@@ -232,6 +232,9 @@ static int  ssi_interrupt(int irq, void *context);
 
 /* SPI methods */
 
+#ifndef CONFIG_SPI_OWNBUS
+static int  ssi_lock(FAR struct spi_dev_s *dev, bool lock);
+#endif
 static void ssi_setfrequencyinternal(struct lm3s_ssidev_s *priv,
               uint32_t frequency);
 static uint32_t ssi_setfrequency(FAR struct spi_dev_s *dev,
@@ -260,7 +263,9 @@ static void ssi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer,
 
 static const struct spi_ops_s g_spiops =
 {
-  .lock         = 0,                 /* Not yet implemented */
+#ifndef CONFIG_SPI_OWNBUS
+  .lock         = ssi_lock,
+#endif
   .select       = lm3s_spiselect,    /* Provided externally by board logic */
   .setfrequency = ssi_setfrequency,
   .setmode      = ssi_setmode,
@@ -969,6 +974,36 @@ static int ssi_interrupt(int irq, void *context)
 #endif
 
 /****************************************************************************
+ * Name: ssi_lock
+ *
+ * Description:
+ *   On SPI busses where there are multiple devices, it will be necessary to
+ *   lock SPI to have exclusive access to the busses for a sequence of
+ *   transfers.  The bus should be locked before the chip is selected. After
+ *   locking the SPI bus, the caller should then also call the setfrequency,
+ *   setbits, and setmode methods to make sure that the SPI is properly
+ *   configured for the device.  If the SPI buss is being shared, then it
+ *   may have been left in an incompatible state.
+ *
+ * Input Parameters:
+ *   dev  - Device-specific state data
+ *   lock - true: Lock spi bus, false: unlock SPI bus
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifndef CONFIG_SPI_OWNBUS
+static int ssi_lock(FAR struct spi_dev_s *dev, bool lock)
+{
+  /* Not implemented */
+
+  return -ENOSYS;
+}
+#endif
+
+/****************************************************************************
  * Name: ssi_setfrequency
  *
  * Description:
diff --git a/nuttx/arch/arm/src/stm32/stm32_spi.c b/nuttx/arch/arm/src/stm32/stm32_spi.c
index de0ff2ac5..4b50380eb 100755
--- a/nuttx/arch/arm/src/stm32/stm32_spi.c
+++ b/nuttx/arch/arm/src/stm32/stm32_spi.c
@@ -1,7 +1,7 @@
 /************************************************************************************
  * arm/arm/src/stm32/stm32_spi.c
  *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -137,7 +137,9 @@ struct stm32_spidev_s
   sem_t            rxsem;      /* Wait for RX DMA to complete */
   sem_t            txsem;      /* Wait for TX DMA to complete */
 #endif
+#ifndef CONFIG_SPI_OWNBUS
   sem_t            exclsem;    /* Held while chip is selected for mutual exclusion */
+#endif
 };
 
 /************************************************************************************
@@ -172,7 +174,9 @@ static inline void spi_dmatxstart(FAR struct stm32_spidev_s *priv);
 
 /* SPI methods */
 
+#ifndef CONFIG_SPI_OWNBUS
 static int         spi_lock(FAR struct spi_dev_s *dev, bool lock);
+#endif
 static uint32_t    spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency);
 static void        spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode);
 static void        spi_setbits(FAR struct spi_dev_s *dev, int nbits);
@@ -197,7 +201,9 @@ static void        spi_portinitialize(FAR struct stm32_spidev_s *priv);
 #ifdef CONFIG_STM32_SPI1
 static const struct spi_ops_s g_sp1iops =
 {
+#ifndef CONFIG_SPI_OWNBUS
   .lock              = spi_lock,
+#endif
   .select            = stm32_spi1select,
   .setfrequency      = spi_setfrequency,
   .setmode           = spi_setmode,
@@ -231,7 +237,9 @@ static struct stm32_spidev_s g_spi1dev =
 #ifdef CONFIG_STM32_SPI2
 static const struct spi_ops_s g_sp2iops =
 {
+#ifndef CONFIG_SPI_OWNBUS
   .lock              = spi_lock,
+#endif
   .select            = stm32_spi2select,
   .setfrequency      = spi_setfrequency,
   .setmode           = spi_setmode,
@@ -265,7 +273,9 @@ static struct stm32_spidev_s g_spi2dev =
 #ifdef CONFIG_STM32_SPI3
 static const struct spi_ops_s g_sp3iops =
 {
+#ifndef CONFIG_SPI_OWNBUS
   .lock              = spi_lock,
+#endif
   .select            = stm32_spi3select,
   .setfrequency      = spi_setfrequency,
   .setmode           = spi_setmode,
@@ -694,6 +704,7 @@ static void spi_modifycr1(FAR struct stm32_spidev_s *priv, uint16_t setbits, uin
  *
  ****************************************************************************/
 
+#ifndef CONFIG_SPI_OWNBUS
 static int spi_lock(FAR struct spi_dev_s *dev, bool lock)
 {
   FAR struct stm32_spidev_s *priv = (FAR struct stm32_spidev_s *)dev;
@@ -717,6 +728,7 @@ static int spi_lock(FAR struct spi_dev_s *dev, bool lock)
     }
   return OK;
 }
+#endif
 
 /************************************************************************************
  * Name: spi_setfrequency
@@ -1185,7 +1197,9 @@ static void spi_portinitialize(FAR struct stm32_spidev_s *priv)
 
   /* Initialize the SPI semaphore that enforces mutually exclusive access */
 
+#ifndef CONFIG_SPI_OWNBUS
   sem_init(&priv->exclsem, 0, 1);
+#endif
 
   /* Initialize the SPI semaphores that is used to wait for DMA completion */
 
diff --git a/nuttx/arch/z80/src/ez80/ez80_spi.c b/nuttx/arch/z80/src/ez80/ez80_spi.c
index 6c5f7f2aa..22cfd789c 100755
--- a/nuttx/arch/z80/src/ez80/ez80_spi.c
+++ b/nuttx/arch/z80/src/ez80/ez80_spi.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * arch/z80/src/ez80/ez80_spi.c
  *
- *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -67,6 +67,9 @@
  * Private Function Prototypes
  ****************************************************************************/
 
+#ifndef CONFIG_SPI_OWNBUS
+static int    spi_lock(FAR struct spi_dev_s *dev, bool lock);
+#endif
 static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev,
                 uint32_t frequency);
 static void   spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode);
@@ -82,7 +85,9 @@ static void   spi_recvblock(FAR struct spi_dev_s *dev, FAR uint8_t *buffer,
 
 static const struct spi_ops_s g_spiops =
 {
-  0,                 /* lock() method not yet implemented */
+#ifndef CONFIG_SPI_OWNBUS
+  spi_lock,
+#endif
   ez80_spiselect,    /* Provided externally by board logic */
   spi_setfrequency,
   spi_setmode,
@@ -110,6 +115,36 @@ static struct spi_dev_s g_spidev = { &g_spiops };
  ****************************************************************************/
 
 /****************************************************************************
+ * Name: spi_lock
+ *
+ * Description:
+ *   On SPI busses where there are multiple devices, it will be necessary to
+ *   lock SPI to have exclusive access to the busses for a sequence of
+ *   transfers.  The bus should be locked before the chip is selected. After
+ *   locking the SPI bus, the caller should then also call the setfrequency,
+ *   setbits, and setmode methods to make sure that the SPI is properly
+ *   configured for the device.  If the SPI buss is being shared, then it
+ *   may have been left in an incompatible state.
+ *
+ * Input Parameters:
+ *   dev  - Device-specific state data
+ *   lock - true: Lock spi bus, false: unlock SPI bus
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifndef CONFIG_SPI_OWNBUS
+static int spi_lock(FAR struct spi_dev_s *dev, bool lock)
+{
+  /* Not implemented */
+
+  return -ENOSYS;
+}
+#endif
+
+/****************************************************************************
  * Name: spi_setfrequency
  *
  * Description:
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt
index 9eed9da0c..6eae21fcf 100644
--- a/nuttx/configs/README.txt
+++ b/nuttx/configs/README.txt
@@ -327,6 +327,13 @@ defconfig -- This is a configuration file similar to the Linux
 		CONFIG_FAT_SECTORSIZE - Max supported sector size
 		CONFIG_FS_ROMFS - Enable ROMFS filesystem support
 
+	SPI driver
+		CONFIG_SPI_OWNBUS - Set if there is only one active device
+		  on the SPI bus.  No locking or SPI configuration will be performed.
+		  It is not necessary for clients to lock, re-configure, etc..
+		CONFIG_SPI_EXCHANGE - Driver supports a single exchange method
+		  (vs a recvblock() and sndblock ()methods)
+
 	SPI-based MMC/SD driver
 		CONFIG_MMCSD_NSLOTS - Number of MMC/SD slots supported by the
 		  driver. Default is one.
@@ -343,6 +350,29 @@ defconfig -- This is a configuration file similar to the Linux
 		CONFIG_MMCSD_HAVECARDDETECT - SDIO driver card detection is
 		  100% accurate
 
+	RiT P14201 OLED driver
+		CONFIG_LCD_P14201 - Enable P14201 support
+		CONFIG_P14201_SPIMODE - Controls the SPI mode
+		CONFIG_P14201_FREQUENCY - Define to use a different bus frequency
+		CONFIG_P14201_NINTERFACES - Specifies the number of physical P14201
+		  devices that will be supported.
+		CONFIG_P14201_FRAMEBUFFER - If defined, accesses will be performed
+		  using an in-memory copy of the OLEDs GDDRAM.  This cost of this
+		  buffer is 128 * 96 / 2 = 6Kb.  If this is defined, then the driver
+		  will be fully functioned. If not, then it will have the following
+		  limitations:
+		  - Reading graphics memory cannot be supported, and
+		  - All pixel writes must be aligned to byte boundaries.
+
+	ENC28J60 Ethernet Driver Configuration Settings:
+		CONFIG_NET_ENC28J60 - Enabled ENC28J60 support
+		CONFIG_ENC28J60_SPIMODE - Controls the SPI mode
+		CONFIG_ENC28J60_FREQUENCY - Define to use a different bus frequency
+		CONFIG_ENC28J60_NINTERFACES - Specifies the number of physical ENC28J60
+		  devices that will be supported.
+		CONFIG_ENC28J60_STATS - Collect network statistics
+		CONFIG_ENC28J60_HALFDUPPLEX - Default is full duplex
+
 	TCP/IP and UDP support via uIP
 		CONFIG_NET - Enable or disable all network features
 		CONFIG_NET_IPv6 - Build in support for IPv6
diff --git a/nuttx/configs/mcu123-lpc214x/src/up_spi.c b/nuttx/configs/mcu123-lpc214x/src/up_spi.c
index f9949a7ea..d8ae8baf8 100644
--- a/nuttx/configs/mcu123-lpc214x/src/up_spi.c
+++ b/nuttx/configs/mcu123-lpc214x/src/up_spi.c
@@ -2,7 +2,7 @@
  * config/mcu123-lpc214x/src/up_spi.c
  * arch/arm/src/board/up_spi.c
  *
- *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2008-2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -123,6 +123,9 @@
  * Private Function Prototypes
  ****************************************************************************/
 
+#ifndef CONFIG_SPI_OWNBUS
+static int    spi_lock(FAR struct spi_dev_s *dev, bool lock);
+#endif
 static void   spi_select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
 static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency);
 static uint8_t  spi_status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
@@ -136,7 +139,9 @@ static void   spi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t
 
 static const struct spi_ops_s g_spiops =
 {
-  .lock              = 0,                 /* Not yet implemented */
+#ifndef CONFIG_SPI_OWNBUS
+  .lock              = spi_lock,
+#endif
   .select            = spi_select,
   .setfrequency      = spi_setfrequency,
   .status            = spi_status,
@@ -157,6 +162,36 @@ static struct spi_dev_s g_spidev = { &g_spiops };
  ****************************************************************************/
 
 /****************************************************************************
+ * Name: spi_lock
+ *
+ * Description:
+ *   On SPI busses where there are multiple devices, it will be necessary to
+ *   lock SPI to have exclusive access to the busses for a sequence of
+ *   transfers.  The bus should be locked before the chip is selected. After
+ *   locking the SPI bus, the caller should then also call the setfrequency,
+ *   setbits, and setmode methods to make sure that the SPI is properly
+ *   configured for the device.  If the SPI buss is being shared, then it
+ *   may have been left in an incompatible state.
+ *
+ * Input Parameters:
+ *   dev  - Device-specific state data
+ *   lock - true: Lock spi bus, false: unlock SPI bus
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifndef CONFIG_SPI_OWNBUS
+static int spi_lock(FAR struct spi_dev_s *dev, bool lock)
+{
+  /* Not implemented */
+
+  return -ENOSYS;
+}
+#endif
+
+/****************************************************************************
  * Name: spi_select
  *
  * Description:
diff --git a/nuttx/configs/olimex-strp711/nettest/defconfig b/nuttx/configs/olimex-strp711/nettest/defconfig
index 256f81665..89a638d3e 100755
--- a/nuttx/configs/olimex-strp711/nettest/defconfig
+++ b/nuttx/configs/olimex-strp711/nettest/defconfig
@@ -432,9 +432,6 @@ CONFIG_FS_ROMFS=n
 # ENC28J60 configuration
 #
 # CONFIG_NET_ENC28J60 - Enabled ENC28J60 support
-# CONFIG_ENC28J60_OWNBUS - Set if the ENC28J60 is the only active device on
-#   the SPI bus.  No locking or SPI configuration will be performed. All
-#   transfers will be performed from the ENC2J60 interrupt handler.
 # CONFIG_ENC28J60_SPIMODE - Controls the SPI mode
 # CONFIG_ENC28J60_FREQUENCY - Define to use a different bus frequency
 # CONFIG_ENC28J60_NINTERFACES - Specifies the number of physical ENC28J60
@@ -442,7 +439,6 @@ CONFIG_FS_ROMFS=n
 # CONFIG_ENC28J60_STATS - Collect network statistics
 # CONFOG_ENC28J60_HALFDUPPLEX - Default is full duplex
 CONFIG_NET_ENC28J60=y
-CONFIG_ENC28J60_OWNBUS=n
 #CONFIG_ENC28J60_SPIMODE
 CONFIG_ENC28J60_FREQUENCY=20000000
 CONFIG_ENC28J60_NINTERFACES=1
diff --git a/nuttx/configs/olimex-strp711/src/up_spi.c b/nuttx/configs/olimex-strp711/src/up_spi.c
index c01cbbc87..5ca35b72e 100644
--- a/nuttx/configs/olimex-strp711/src/up_spi.c
+++ b/nuttx/configs/olimex-strp711/src/up_spi.c
@@ -390,6 +390,9 @@ static inline void spi_drain(FAR struct str71x_spidev_s *priv);
 
 /* SPI methods */
 
+#ifndef CONFIG_SPI_OWNBUS
+static int    spi_lock(FAR struct spi_dev_s *dev, bool lock);
+#endif
 static void   spi_select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
 static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency);
 static uint8_t  spi_status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
@@ -403,7 +406,9 @@ static void   spi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t
 
 static const struct spi_ops_s g_spiops =
 {
-  .lock              = 0,                 /* Not yet implemented */
+#ifndef CONFIG_SPI_OWNBUS
+  .lock              = spi_lock,
+#endif
   .select            = spi_select,
   .setfrequency      = spi_setfrequency,
   .status            = spi_status,
@@ -527,6 +532,36 @@ static inline void spi_drain(FAR struct str71x_spidev_s *priv)
 }
 
 /****************************************************************************
+ * Name: spi_lock
+ *
+ * Description:
+ *   On SPI busses where there are multiple devices, it will be necessary to
+ *   lock SPI to have exclusive access to the busses for a sequence of
+ *   transfers.  The bus should be locked before the chip is selected. After
+ *   locking the SPI bus, the caller should then also call the setfrequency,
+ *   setbits, and setmode methods to make sure that the SPI is properly
+ *   configured for the device.  If the SPI buss is being shared, then it
+ *   may have been left in an incompatible state.
+ *
+ * Input Parameters:
+ *   dev  - Device-specific state data
+ *   lock - true: Lock spi bus, false: unlock SPI bus
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifndef CONFIG_SPI_OWNBUS
+static int spi_lock(FAR struct spi_dev_s *dev, bool lock)
+{
+  /* Not implemented */
+
+  return -ENOSYS;
+}
+#endif
+
+/****************************************************************************
  * Name: spi_select
  *
  * Description:
diff --git a/nuttx/drivers/lcd/p14201.c b/nuttx/drivers/lcd/p14201.c
index bc78ffb8a..73e303979 100755
--- a/nuttx/drivers/lcd/p14201.c
+++ b/nuttx/drivers/lcd/p14201.c
@@ -65,13 +65,17 @@
 /* P14201 Configuration Settings:
  *
  * CONFIG_LCD_P14201 - Enable P14201 support
- * CONFIG_P14201_OWNBUS - Set if the P14201 is the only active device on the SPI bus.
- *   No locking or SPI configuration will be performed. All transfers will be performed
- *   from the ENC2J60 interrupt handler.
  * CONFIG_P14201_SPIMODE - Controls the SPI mode
  * CONFIG_P14201_FREQUENCY - Define to use a different bus frequency
  * CONFIG_P14201_NINTERFACES - Specifies the number of physical P14201 devices that
  *   will be supported.
+ * CONFIG_P14201_FRAMEBUFFER - If defined, accesses will be performed using an in-memory
+ *   copy of the OLEDs GDDRAM.  This cost of this buffer is 128 * 96 / 2 = 6Kb.  If this
+ *   is defined, then the driver will be fully functioned. If not, then it will have the
+ *   following limitations:
+ *
+ *   - Reading graphics memory cannot be supported, and
+ *   - All pixel writes must be aligned to byte boundaries.
  *
  * Required LCD driver settings:
  * CONFIG_LCD_MAXCONTRAST should be 255, but any value >0 and <=255 will be accepted.
@@ -149,7 +153,7 @@
 
 /* Default contrast */
 
-#define RIT_CONTRAST    183  /* 183/255 */
+#define RIT_CONTRAST    ((23 * (CONFIG_LCD_MAXCONTRAST+1) / 32) - 1)
 
 /* Helper Macros **********************************************************************/
 
@@ -185,7 +189,7 @@ struct rit_dev_s
 /* Low-level SPI helpers */
 
 static inline void rit_configspi(FAR struct spi_dev_s *spi);
-#ifdef CONFIG_P14201_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
 static inline void rit_select(FAR struct spi_dev_s *spi);
 static inline void rit_deselect(FAR struct spi_dev_s *spi);
 #else
@@ -244,7 +248,19 @@ static int rit_setcontrast(struct lcd_dev_s *dev, unsigned int contrast);
  * if there are multiple LCD devices, they must each have unique run buffers.
  */
 
-static uint8_t g_runbuffer[CONFIG_P14201_NINTERFACES * RIT_XRES / 2];
+static uint8_t g_runbuffer[RIT_XRES / 2];
+
+/* CONFIG_P14201_FRAMEBUFFER - If defined, accesses will be performed using an in-memory
+ *   copy of the OLEDs GDDRAM.  This cost of this buffer is 128 * 64 / 2 = 4Kb.  If this
+ *   is defined, then the driver will be full functioned. If not, then:
+ *
+ *   - Reading graphics memory cannot be supported, and
+ *   - All pixel writes must be aligned to byte boundaries.
+ */
+
+#ifdef CONFIG_P14201_FRAMEBUFFER
+static uint8_t g_framebuffer[RIT_YRES * RIT_XRES / 2];
+#endif
 
 /* This structure describes the overall LCD video controller */
 
@@ -289,7 +305,6 @@ static struct rit_dev_s g_oleddev =
   },
 };
 
-
 /* A table of magic initialization commands. This initialization sequence is
  * derived from RiT Application Note for the P14201 (with a few tweaked values
  * as discovered in some Luminary code examples).
@@ -419,7 +434,7 @@ static inline void rit_configspi(FAR struct spi_dev_s *spi)
    * bother because it might change.
    */
 
-#ifdef CONFIG_P14201_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
   SPI_SETMODE(spi, CONFIG_P14201_SPIMODE);
   SPI_SETBITS(spi, 8);
 #ifdef CONFIG_P14201_FREQUENCY
@@ -444,7 +459,7 @@ static inline void rit_configspi(FAR struct spi_dev_s *spi)
  *
  **************************************************************************************/
 
-#ifdef CONFIG_P14201_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
 static inline void rit_select(FAR struct spi_dev_s *spi)
 {
   /* We own the SPI bus, so just select the chip */
@@ -489,7 +504,7 @@ static void rit_select(FAR struct spi_dev_s *spi)
  *
  **************************************************************************************/
 
-#ifdef CONFIG_P14201_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
 static inline void rit_deselect(FAR struct spi_dev_s *spi)
 {
   /* We own the SPI bus, so just de-select the chip */
@@ -605,6 +620,26 @@ static void rit_sndcmds(FAR struct rit_dev_s *priv, FAR const uint8_t *table)
 
 static inline void rit_clear(FAR struct rit_dev_s *priv)
 {
+#ifdef CONFIG_P14201_FRAMEBUFFER
+  FAR uint8_t *ptr = g_framebuffer;
+  unsigned int row;
+
+  /* Set a window to fill the entire display */
+
+  rit_sndcmd(priv, g_setallcol, sizeof(g_setallcol));
+  rit_sndcmd(priv, g_setallrow, sizeof(g_setallrow));
+  rit_sndcmd(priv, g_horzinc,   sizeof(g_horzinc));
+
+  /* Display each row */
+
+  for(row = 0; row < RIT_YRES; row++)
+    {
+      /* Display a horizontal run */
+  
+      rit_snddata(priv, ptr, RIT_XRES / 2);
+      ptr += RIT_XRES / 2;
+    }
+#else
   unsigned int row;
 
   /* Create a black row */
@@ -625,6 +660,7 @@ static inline void rit_clear(FAR struct rit_dev_s *priv)
   
       rit_snddata(priv, g_runbuffer, RIT_XRES / 2);
     }
+#endif
 }
 
 /**************************************************************************************
@@ -644,11 +680,63 @@ static inline void rit_clear(FAR struct rit_dev_s *priv)
 static int rit_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
                       size_t npixels)
 {
+#ifdef CONFIG_P14201_FRAMEBUFFER
   FAR struct rit_dev_s *priv = (FAR struct rit_dev_s *)&g_oleddev;
   uint8_t cmd[3];
+  uint8_t *run;
+  int start;
+  int end;
+  int i;
 
   gvdbg("row: %d col: %d npixels: %d\n", row, col, npixels);
 
+  /* Get the starting and ending byte offsets containing the run */
+
+  start = col >> 1;
+  aend  = (col + npixels) >> 1;
+  end   = (col + npixels + 1) >> 1;
+
+  /* Get the beginning of the run in the framebuffer */
+
+  run = g_framebuffer + row * RIT_XRES / 2 + start;
+
+  /* Copy the run into the framebuffer, handling nibble alignment */
+
+  if ((col & 1) == 0)
+    {
+      /* Beginning of buffer is properly aligned */
+
+      memcpy(run, buffer, aend - start);
+
+      /* Handle an final partial byte */
+
+      if (aend != end)
+        {
+          /* The leftmost column being contained in bits 7:4  */
+# warning "Missing logic"
+        }
+    }
+  else
+    {
+      /* Buffer is not byte aligned with display data.   Each byte contains the
+       * data for two columns:  The leftmost column being contained in bits
+       * 7:4 and the rightmost column being contained in bits 3:0.
+       */
+
+      for (i = 0; i < aend - start; i++)
+        {
+# warning "Missing logic"
+        }
+      
+    }
+
+  /* Then copy the (aligned) run from the framebuffer to the OLED */
+# warning "Missing logic"
+#else
+  FAR struct rit_dev_s *priv = (FAR struct rit_dev_s *)&g_oleddev;
+  uint8_t cmd[3];
+
+  gvdbg("row: %d col: %d npixels: %d\n", row, col, npixels);
   DEBUGASSERT(buffer);
   if (npixels > 0)
     {
@@ -701,14 +789,18 @@ static int rit_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
 static int rit_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer,
                       size_t npixels)
 {
-  /* Buffer must be provided and aligned to a 16-bit address boundary */
-
   gvdbg("row: %d col: %d npixels: %d\n", row, col, npixels);
   DEBUGASSERT(buffer);
 
+#ifdef CONFIG_P14201_FRAMEBUFFER
+  /* Cant read from OLED GDDRAM in SPI mode, but we can read from the framebuffer */
+
+# warning "Missing logic"
+#else
   /* Can't read from OLED GDDRAM in SPI mode */
 
   return -ENOSYS;
+#endif
 }
 
 /**************************************************************************************
@@ -886,6 +978,12 @@ FAR struct lcd_dev_s *rit_initialize(FAR struct spi_dev_s *spi, unsigned int dev
   priv->contrast = RIT_CONTRAST;
   priv->on       = false;
 
+  /* Initialize the framebuffer */
+
+#ifdef CONFIG_P14201_FRAMEBUFFER
+  memset(g_framebuffer, (RIT_Y4_BLACK << 4) | RIT_Y4_BLACK, RIT_YRES * RIT_XRES / 2);
+#endif
+
   /* Clear the display */
 
   rit_clear(priv);
diff --git a/nuttx/drivers/net/enc28j60.c b/nuttx/drivers/net/enc28j60.c
index 881b97393..1db44cef1 100755
--- a/nuttx/drivers/net/enc28j60.c
+++ b/nuttx/drivers/net/enc28j60.c
@@ -75,9 +75,6 @@
 /* ENC28J60 Configuration Settings:
  *
  * CONFIG_NET_ENC28J60 - Enabled ENC28J60 support
- * CONFIG_ENC28J60_OWNBUS - Set if the ENC28J60 is the only active device on
- *   the SPI bus.  No locking or SPI configuration will be performed. All
- *   transfers will be performed from the ENC2J60 interrupt handler.
  * CONFIG_ENC28J60_SPIMODE - Controls the SPI mode
  * CONFIG_ENC28J60_FREQUENCY - Define to use a different bus frequency
  * CONFIG_ENC28J60_NINTERFACES - Specifies the number of physical ENC28J60
@@ -110,7 +107,7 @@
 
 /* We need to have the work queue to handle SPI interrupts */
 
-#if !defined(CONFIG_SCHED_WORKQUEUE) && !defined(CONFIG_ENC28J60_OWNBUS)
+#if !defined(CONFIG_SCHED_WORKQUEUE) && !defined(CONFIG_SPI_OWNBUS)
 #  error "Worker thread support is required (CONFIG_SCHED_WORKQUEUE)"
 #endif
 
@@ -189,7 +186,7 @@ struct enc_driver_s
    * interrupt handler.
    */
  
-#ifndef CONFIG_ENC28J60_OWNBUS
+#ifndef CONFIG_SPI_OWNBUS
   struct work_s work;         /* Work queue support */
 #endif
 
@@ -221,7 +218,7 @@ static struct enc_driver_s g_enc28j60[CONFIG_ENC28J60_NINTERFACES];
 /* Low-level SPI helpers */
 
 static inline void enc_configspi(FAR struct spi_dev_s *spi);
-#ifdef CONFIG_ENC28J60_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
 static inline void enc_select(FAR struct spi_dev_s *spi);
 static inline void enc_deselect(FAR struct spi_dev_s *spi);
 #else
@@ -315,7 +312,7 @@ static inline void enc_configspi(FAR struct spi_dev_s *spi)
    * Otherwise, don't bother because it might change.
    */
 
-#ifdef CONFIG_ENC28J60_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
   SPI_SETMODE(spi, CONFIG_ENC28J60_SPIMODE);
   SPI_SETBITS(spi, 8);
 #ifdef CONFIG_ENC28J60_FREQUENCY
@@ -340,7 +337,7 @@ static inline void enc_configspi(FAR struct spi_dev_s *spi)
  *
  ****************************************************************************/
 
-#ifdef CONFIG_ENC28J60_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
 static inline void enc_select(FAR struct spi_dev_s *spi)
 {
   /* We own the SPI bus, so just select the chip */
@@ -385,7 +382,7 @@ static void enc_select(FAR struct spi_dev_s *spi)
  *
  ****************************************************************************/
 
-#ifdef CONFIG_ENC28J60_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
 static inline void enc_deselect(FAR struct spi_dev_s *spi)
 {
   /* We own the SPI bus, so just de-select the chip */
@@ -1492,7 +1489,7 @@ static int enc_interrupt(int irq, FAR void *context)
 
   DEBUGASSERT(priv->irq == irq);
 
-#ifdef CONFIG_ENC28J60_OWNBUS
+#ifdef CONFIG_SPI_OWNBUS
   /* In very simple environments, we own the SPI and can do data transfers
    * from the interrupt handler.  That is actually a very bad idea in any
    * case because it keeps interrupts disabled for a long time.
diff --git a/nuttx/examples/nx/nx_kbdin.c b/nuttx/examples/nx/nx_kbdin.c
index 5b08cabbe..3088885ba 100644
--- a/nuttx/examples/nx/nx_kbdin.c
+++ b/nuttx/examples/nx/nx_kbdin.c
@@ -63,10 +63,20 @@
  * pixel depths that are not directly addressable (1,2,4, and 24).
  */
 
-#if CONFIG_EXAMPLES_NX_BPP == 8
+#if CONFIG_EXAMPLES_NX_BPP == 1
+#  define RENDERER nxf_convert_1bpp
+#elif CONFIG_EXAMPLES_NX_BPP == 2
+#  define RENDERER nxf_convert_2bpp
+#elif CONFIG_EXAMPLES_NX_BPP == 2
+#  define RENDERER nxf_convert_4bpp
+#elif CONFIG_EXAMPLES_NX_BPP == 4
+#  define RENDERER nxf_convert_8bpp
+#elif CONFIG_EXAMPLES_NX_BPP == 8
 #  define RENDERER nxf_convert_8bpp
 #elif CONFIG_EXAMPLES_NX_BPP == 16
 #  define RENDERER nxf_convert_16bpp
+#elif CONFIG_EXAMPLES_NX_BPP == 24
+#  define RENDERER nxf_convert_24bpp
 #elif  CONFIG_EXAMPLES_NX_BPP == 32
 #  define RENDERER nxf_convert_32bpp
 #else
diff --git a/nuttx/include/nuttx/enc28j60.h b/nuttx/include/nuttx/enc28j60.h
index efa4ed652..f668b6cc6 100755
--- a/nuttx/include/nuttx/enc28j60.h
+++ b/nuttx/include/nuttx/enc28j60.h
@@ -50,9 +50,6 @@
 /* ENC28J60 Configuration Settings:
  *
  * CONFIG_NET_ENC28J60 - Enabled ENC28J60 support
- * CONFIG_ENC28J60_OWNBUS - Set if the ENC28J60 is the only active device on
- *   the SPI bus.  No locking or SPI configuration will be performed. All
- *   transfers will be performed from the ENC2J60 interrupt handler.
  * CONFIG_ENC28J60_SPIMODE - Controls the SPI mode
  * CONFIG_ENC28J60_FREQUENCY - Define to use a different bus frequency
  * CONFIG_ENC28J60_NINTERFACES - Specifies the number of physical ENC28J60
diff --git a/nuttx/include/nuttx/p14201.h b/nuttx/include/nuttx/p14201.h
index 9dfbf8b00..443d2537a 100755
--- a/nuttx/include/nuttx/p14201.h
+++ b/nuttx/include/nuttx/p14201.h
@@ -1,5 +1,6 @@
 /****************************************************************************
  * include/nuttx/p14201.h
+ * Application interface to the RiT P14201 OLED driver
  *
  *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -49,13 +50,17 @@
 /* P14201 Configuration Settings:
  *
  * CONFIG_LCD_P14201 - Enable P14201 support
- * CONFIG_P14201_OWNBUS - Set if the P14201 is the only active device on the SPI bus.
- *   No locking or SPI configuration will be performed. All transfers will be performed
- *   from the ENC2J60 interrupt handler.
  * CONFIG_P14201_SPIMODE - Controls the SPI mode
  * CONFIG_P14201_FREQUENCY - Define to use a different bus frequency
  * CONFIG_P14201_NINTERFACES - Specifies the number of physical P14201 devices that
  *   will be supported.
+ * CONFIG_P14201_FRAMEBUFFER - If defined, accesses will be performed using an in-memory
+ *   copy of the OLEDs GDDRAM.  This cost of this buffer is 128 * 96 / 2 = 6Kb.  If this
+ *   is defined, then the driver will be fully functioned. If not, then it will have the
+ *   following limitations:
+ *
+ *   - Reading graphics memory cannot be supported, and
+ *   - All pixel writes must be aligned to byte boundaries.
  *
  * Required LCD driver settings:
  * CONFIG_LCD_MAXCONTRAST should be 255, but any value >0 and <=255 will be accepted.
diff --git a/nuttx/include/nuttx/spi.h b/nuttx/include/nuttx/spi.h
index ce97c5183..12d9b0aee 100644
--- a/nuttx/include/nuttx/spi.h
+++ b/nuttx/include/nuttx/spi.h
@@ -50,7 +50,16 @@
  * Pre-processor Definitions
  ****************************************************************************/
 
-/* Access macros */
+/* Configuration ************************************************************/
+
+/* CONFIG_SPI_OWNBUS - Set if there is only one active device on the SPI bus.
+ *   No locking or SPI configuration will be performed. It is not necessary
+ *   for clients to lock, re-configure, etc..
+ * CONFIG_SPI_EXCHANGE - Driver supports a single exchange method
+ *   (vs a recvblock() and sndblock ()methods).
+ */
+
+/* Access macros ************************************************************/
 
 /****************************************************************************
  * Name: SPI_LOCK
@@ -73,7 +82,11 @@
  *
  ****************************************************************************/
 
-#define SPI_LOCK(d,l) ((d)->ops->lock ? (d)->ops->lock(d,l) : OK)
+#ifndef CONFIG_SPI_OWNBUS
+#  define SPI_LOCK(d,l) (d)->ops->lock(d,l)
+#else
+#  define SPI_LOCK(d,l)
+#endif
 
 /****************************************************************************
  * Name: SPI_SELECT
@@ -326,7 +339,9 @@ enum spi_mode_e
 struct spi_dev_s;
 struct spi_ops_s
 {
+#ifndef CONFIG_SPI_OWNBUS
   int      (*lock)(FAR struct spi_dev_s *dev, bool lock);
+#endif
   void     (*select)(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
                      bool selected);
   uint32_t (*setfrequency)(FAR struct spi_dev_s *dev, uint32_t frequency);