diff options
Diffstat (limited to 'nuttx/arch')
65 files changed, 2048 insertions, 2011 deletions
diff --git a/nuttx/arch/z80/include/ez80/io.h b/nuttx/arch/z80/include/ez80/io.h index 84ba3f965..fc41ccb59 100644 --- a/nuttx/arch/z80/include/ez80/io.h +++ b/nuttx/arch/z80/include/ez80/io.h @@ -2,7 +2,7 @@ * arch/z80/include/ez80/io.h * arch/chip/io.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -45,7 +45,7 @@ * Included Files ****************************************************************************/ -#include <sys/types.h> +#include <stdint.h> /**************************************************************************** * Definitions @@ -75,8 +75,8 @@ extern "C" { #define EXTERN extern #endif -EXTERN void outp(uint16 p, ubyte c); -EXTERN ubyte inp(uint16 p); +EXTERN void outp(uint16_t p, uint8_t c); +EXTERN uint8_t inp(uint16_t p); #undef EXTERN #ifdef __cplusplus diff --git a/nuttx/arch/z80/include/ez80/irq.h b/nuttx/arch/z80/include/ez80/irq.h index dd478d503..49039fbce 100644 --- a/nuttx/arch/z80/include/ez80/irq.h +++ b/nuttx/arch/z80/include/ez80/irq.h @@ -2,7 +2,7 @@ * arch/ez80/include/ez80/irq.h * arch/chip/irq.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -49,6 +49,10 @@ * Included Files ****************************************************************************/ +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif + /**************************************************************************** * Definitions ****************************************************************************/ diff --git a/nuttx/arch/z80/include/serial.h b/nuttx/arch/z80/include/serial.h index dc3c4948b..934a93cd4 100644 --- a/nuttx/arch/z80/include/serial.h +++ b/nuttx/arch/z80/include/serial.h @@ -1,7 +1,7 @@ /**************************************************************************** * arch/serial.h * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without diff --git a/nuttx/arch/z80/include/z8/irq.h b/nuttx/arch/z80/include/z8/irq.h index 764ace338..fb0cc7281 100644 --- a/nuttx/arch/z80/include/z8/irq.h +++ b/nuttx/arch/z80/include/z8/irq.h @@ -2,7 +2,7 @@ * arch/z8/include/z8/irq.h * arch/chip/irq.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -45,6 +45,10 @@ * Included Files ****************************************************************************/ +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif + /**************************************************************************** * Definitions ****************************************************************************/ @@ -321,12 +325,12 @@ struct xcptcontext */ #ifndef CONFIG_DISABLE_SIGNALS - CODE void *sigdeliver; /* Actual type is sig_deliver_t */ + CODE void *sigdeliver; /* Actual type is sig_deliver_t */ /* The following retains that state during signal execution */ - uint16 saved_pc; /* Saved return address */ - uint16 saved_irqctl; /* Saved interrupt state */ + uint16_t saved_pc; /* Saved return address */ + uint16_t saved_irqctl; /* Saved interrupt state */ #endif }; #endif diff --git a/nuttx/arch/z80/include/z80/io.h b/nuttx/arch/z80/include/z80/io.h index dc74d047e..f3cc992ee 100644 --- a/nuttx/arch/z80/include/z80/io.h +++ b/nuttx/arch/z80/include/z80/io.h @@ -2,7 +2,7 @@ * arch/z80/include/z80/io.h * arch/chip/io.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without diff --git a/nuttx/arch/z80/include/z80/irq.h b/nuttx/arch/z80/include/z80/irq.h index 05e62a019..cc0cb25cc 100644 --- a/nuttx/arch/z80/include/z80/irq.h +++ b/nuttx/arch/z80/include/z80/irq.h @@ -2,7 +2,7 @@ * arch/z80/include/z80/irq.h * arch/chip/irq.h * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -45,6 +45,10 @@ * Included Files ****************************************************************************/ +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif + /**************************************************************************** * Definitions ****************************************************************************/ @@ -109,8 +113,8 @@ struct xcptcontext /* The following retains that state during signal execution */ - uint16 saved_pc; /* Saved return address */ - uint16 saved_i; /* Saved interrupt state */ + uint16_t saved_pc; /* Saved return address */ + uint16_t saved_i; /* Saved interrupt state */ #endif }; #endif diff --git a/nuttx/arch/z80/src/common/up_arch.h b/nuttx/arch/z80/src/common/up_arch.h index ff53010db..0cb523ea1 100644 --- a/nuttx/arch/z80/src/common/up_arch.h +++ b/nuttx/arch/z80/src/common/up_arch.h @@ -1,7 +1,7 @@ /************************************************************************************ * common/up_arch.h * - * Copyright (C) 2007 Gregory Nutt. All rights reserved. + * Copyright (C) 2007, 2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -14,7 +14,7 @@ * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. - * 3. Neither the name Gregory Nutt nor the names of its contributors may be + * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * @@ -41,9 +41,6 @@ ************************************************************************************/ #include <nuttx/config.h> -#ifndef __ASSEMBLY__ -# include <sys/types.h> -#endif #include <arch/board/board.h> #include "chip/chip.h" diff --git a/nuttx/arch/z80/src/common/up_assert.c b/nuttx/arch/z80/src/common/up_assert.c index 1d8fd6a5a..9fe66ecda 100644 --- a/nuttx/arch/z80/src/common/up_assert.c +++ b/nuttx/arch/z80/src/common/up_assert.c @@ -1,7 +1,7 @@ /**************************************************************************** * common/up_assert.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <stdlib.h> #include <assert.h> #include <debug.h> @@ -109,7 +109,7 @@ static void _up_assert(int errorcode) /* __attribute__ ((noreturn)) */ ****************************************************************************/ #ifdef CONFIG_HAVE_FILENAME -void up_assert(const ubyte *filename, int lineno) +void up_assert(const uint8_t *filename, int lineno) #else void up_assert(void) #endif @@ -146,7 +146,7 @@ void up_assert(void) ****************************************************************************/ #ifdef CONFIG_HAVE_FILENAME -void up_assert_code(const ubyte *filename, int lineno, int errorcode) +void up_assert_code(const uint8_t *filename, int lineno, int errorcode) #else void up_assert_code(int errorcode) #endif diff --git a/nuttx/arch/z80/src/common/up_blocktask.c b/nuttx/arch/z80/src/common/up_blocktask.c index 3d3ce99ad..7feb02169 100644 --- a/nuttx/arch/z80/src/common/up_blocktask.c +++ b/nuttx/arch/z80/src/common/up_blocktask.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/common/up_blocktask.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdbool.h> #include <sched.h> #include <debug.h> @@ -97,7 +97,7 @@ void up_block_task(FAR _TCB *tcb, tstate_t task_state) else { FAR _TCB *rtcb = (FAR _TCB*)g_readytorun.head; - boolean switch_needed; + bool switch_needed; /* dbg("Blocking TCB=%p\n", tcb); */ diff --git a/nuttx/arch/z80/src/common/up_createstack.c b/nuttx/arch/z80/src/common/up_createstack.c index 1c2d08b1f..c9da4cb9f 100644 --- a/nuttx/arch/z80/src/common/up_createstack.c +++ b/nuttx/arch/z80/src/common/up_createstack.c @@ -38,11 +38,14 @@ ****************************************************************************/ #include <nuttx/config.h> + #include <sys/types.h> +#include <stdint.h> #include <sched.h> #include <debug.h> #include <nuttx/kmalloc.h> #include <nuttx/arch.h> + #include "up_arch.h" #include "up_internal.h" @@ -90,7 +93,7 @@ int up_create_stack(_TCB *tcb, size_t stack_size) if (!tcb->stack_alloc_ptr) { - tcb->stack_alloc_ptr = (uint32 *)kzmalloc(stack_size); + tcb->stack_alloc_ptr = (uint32_t*)kzmalloc(stack_size); } if (tcb->stack_alloc_ptr) @@ -105,7 +108,7 @@ int up_create_stack(_TCB *tcb, size_t stack_size) * referenced as positive word offsets from sp. */ - top_of_stack = (uint32)tcb->stack_alloc_ptr + stack_size - 4; + top_of_stack = (uint32_t)tcb->stack_alloc_ptr + stack_size - 4; /* The Arm7Tdmi stack must be aligned at word (4 byte) * boundaries. If necessary top_of_stack must be rounded @@ -113,11 +116,11 @@ int up_create_stack(_TCB *tcb, size_t stack_size) */ top_of_stack &= ~3; - size_of_stack = top_of_stack - (uint32)tcb->stack_alloc_ptr + 4; + size_of_stack = top_of_stack - (uint32_t)tcb->stack_alloc_ptr + 4; /* Save the adjusted stack values in the _TCB */ - tcb->adj_stack_ptr = (uint32*)top_of_stack; + tcb->adj_stack_ptr = (uint32_t*)top_of_stack; tcb->adj_stack_size = size_of_stack; up_ledon(LED_STACKCREATED); diff --git a/nuttx/arch/z80/src/common/up_doirq.c b/nuttx/arch/z80/src/common/up_doirq.c index fae0142eb..2c4c9e113 100644 --- a/nuttx/arch/z80/src/common/up_doirq.c +++ b/nuttx/arch/z80/src/common/up_doirq.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/common/up_doirq.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <assert.h> #include "up_arch.h" @@ -70,7 +70,7 @@ * Public Functions ****************************************************************************/ -FAR chipreg_t *up_doirq(ubyte irq, FAR chipreg_t *regs) +FAR chipreg_t *up_doirq(uint8_t irq, FAR chipreg_t *regs) { up_ledon(LED_INIRQ); diff --git a/nuttx/arch/z80/src/common/up_exit.c b/nuttx/arch/z80/src/common/up_exit.c index c9ae45bb9..da49ce377 100644 --- a/nuttx/arch/z80/src/common/up_exit.c +++ b/nuttx/arch/z80/src/common/up_exit.c @@ -1,7 +1,7 @@ /**************************************************************************** * common/up_exit.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <sched.h> #include <debug.h> diff --git a/nuttx/arch/z80/src/common/up_idle.c b/nuttx/arch/z80/src/common/up_idle.c index e2fb1e00f..550bc124d 100644 --- a/nuttx/arch/z80/src/common/up_idle.c +++ b/nuttx/arch/z80/src/common/up_idle.c @@ -1,7 +1,7 @@ /**************************************************************************** * common/up_idle.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <nuttx/arch.h> #include <arch/board/board.h> @@ -55,7 +55,7 @@ ****************************************************************************/ #if defined(CONFIG_ARCH_LEDS) && defined(CONFIG_ARCH_BRINGUP) -static ubyte g_ledtoggle = 0; +static uint8_t g_ledtoggle = 0; #endif /**************************************************************************** diff --git a/nuttx/arch/z80/src/common/up_initialize.c b/nuttx/arch/z80/src/common/up_initialize.c index 47c1e456e..1c71fa517 100644 --- a/nuttx/arch/z80/src/common/up_initialize.c +++ b/nuttx/arch/z80/src/common/up_initialize.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/common/up_initialize.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <debug.h> #include <nuttx/arch.h> diff --git a/nuttx/arch/z80/src/common/up_internal.h b/nuttx/arch/z80/src/common/up_internal.h index bd0917bc8..2e5afb2e3 100644 --- a/nuttx/arch/z80/src/common/up_internal.h +++ b/nuttx/arch/z80/src/common/up_internal.h @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/common/up_internal.h * - * Copyright (C) 2007, 2008, 2009 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -55,6 +55,9 @@ * Included Files ****************************************************************************/ +#include <stdint.h> +#include <stdbool.h> + #include <arch/irq.h> #include "chip/chip.h" #include "chip/switch.h" @@ -108,7 +111,7 @@ EXTERN void up_lowuartinit(void); /* Defined in up_doirq.c */ -EXTERN FAR chipreg_t *up_doirq(ubyte irq, FAR chipreg_t *regs); +EXTERN FAR chipreg_t *up_doirq(uint8_t irq, FAR chipreg_t *regs); /* Define in up_sigdeliver */ @@ -168,7 +171,7 @@ EXTERN void up_timerhook(void); EXTERN int up_netinitialize(void); EXTERN void up_netuninitialize(void); # ifdef CONFIG_ARCH_MCFILTER -EXTERN int up_multicastfilter(FAR struct uip_driver_s *dev, FAR ubyte *mac, boolean enable); +EXTERN int up_multicastfilter(FAR struct uip_driver_s *dev, FAR uint8_t *mac, bool enable); # else # define up_multicastfilter(dev, mac, enable) # endif @@ -180,7 +183,7 @@ EXTERN int up_multicastfilter(FAR struct uip_driver_s *dev, FAR ubyte *mac, bool /* Return the current value of the stack pointer (used in stack dump logic) */ -EXTERN uint16 up_getsp(void); +EXTERN uint16_t up_getsp(void); /* Dump stack and registers */ diff --git a/nuttx/arch/z80/src/common/up_interruptcontext.c b/nuttx/arch/z80/src/common/up_interruptcontext.c index 354227cc2..e8887abef 100644 --- a/nuttx/arch/z80/src/common/up_interruptcontext.c +++ b/nuttx/arch/z80/src/common/up_interruptcontext.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/common/up_interruptcontext.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdbool.h> #include <nuttx/arch.h> #include <nuttx/irq.h> @@ -62,11 +62,11 @@ /**************************************************************************** * Name: up_interrupt_context * - * Description: Return TRUE is we are currently executing in + * Description: Return true is we are currently executing in * the interrupt handler context. ****************************************************************************/ -boolean up_interrupt_context(void) +bool up_interrupt_context(void) { return IN_INTERRUPT(); } diff --git a/nuttx/arch/z80/src/common/up_puts.c b/nuttx/arch/z80/src/common/up_puts.c index 1221a2466..06c38573d 100644 --- a/nuttx/arch/z80/src/common/up_puts.c +++ b/nuttx/arch/z80/src/common/up_puts.c @@ -38,7 +38,6 @@ ****************************************************************************/ #include <nuttx/config.h> -#include <sys/types.h> #include <nuttx/arch.h> #include "up_internal.h" diff --git a/nuttx/arch/z80/src/common/up_releasepending.c b/nuttx/arch/z80/src/common/up_releasepending.c index bfe35d2a7..8090cb763 100644 --- a/nuttx/arch/z80/src/common/up_releasepending.c +++ b/nuttx/arch/z80/src/common/up_releasepending.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/common/up_releasepending.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <sched.h> #include <debug.h> diff --git a/nuttx/arch/z80/src/common/up_releasestack.c b/nuttx/arch/z80/src/common/up_releasestack.c index 48328737c..549879725 100644 --- a/nuttx/arch/z80/src/common/up_releasestack.c +++ b/nuttx/arch/z80/src/common/up_releasestack.c @@ -1,7 +1,7 @@ /************************************************************ * common/up_releasestack.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -38,10 +38,11 @@ ************************************************************/ #include <nuttx/config.h> -#include <sys/types.h> + #include <sched.h> #include <debug.h> #include <nuttx/arch.h> + #include "os_internal.h" #include "up_internal.h" diff --git a/nuttx/arch/z80/src/common/up_reprioritizertr.c b/nuttx/arch/z80/src/common/up_reprioritizertr.c index 31fab37de..f52050033 100644 --- a/nuttx/arch/z80/src/common/up_reprioritizertr.c +++ b/nuttx/arch/z80/src/common/up_reprioritizertr.c @@ -39,7 +39,8 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> #include <sched.h> #include <debug.h> @@ -86,7 +87,7 @@ * ****************************************************************************/ -void up_reprioritize_rtr(FAR _TCB *tcb, ubyte priority) +void up_reprioritize_rtr(FAR _TCB *tcb, uint8_t priority) { /* Verify that the caller is sane */ @@ -100,12 +101,12 @@ void up_reprioritize_rtr(FAR _TCB *tcb, ubyte priority) else { FAR _TCB *rtcb = (FAR _TCB*)g_readytorun.head; - boolean switch_needed; + bool switch_needed; slldbg("TCB=%p PRI=%d\n", tcb, priority); /* Remove the tcb task from the ready-to-run list. - * sched_removereadytorun will return TRUE if we just + * sched_removereadytorun will return true if we just * remove the head of the ready to run list. */ @@ -113,10 +114,10 @@ void up_reprioritize_rtr(FAR _TCB *tcb, ubyte priority) /* Setup up the new task priority */ - tcb->sched_priority = (ubyte)priority; + tcb->sched_priority = (uint8_t)priority; /* Return the task to the specified blocked task list. - * sched_addreadytorun will return TRUE if the task was + * sched_addreadytorun will return true if the task was * added to the new list. We will need to perform a context * switch only if the EXCLUSIVE or of the two calls is non-zero * (i.e., one and only one the calls changes the head of the diff --git a/nuttx/arch/z80/src/common/up_stackdump.c b/nuttx/arch/z80/src/common/up_stackdump.c index 00c923aa9..62c4ee24c 100644 --- a/nuttx/arch/z80/src/common/up_stackdump.c +++ b/nuttx/arch/z80/src/common/up_stackdump.c @@ -1,7 +1,7 @@ /**************************************************************************** * common/up_stackdump.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <debug.h> #include "up_arch.h" @@ -80,9 +80,9 @@ static void up_stackdump(void) { _TCB *rtcb = (_TCB*)g_readytorun.head; - uint16 sp = up_getsp(); - uint16 stack_base = (uint16)rtcb->adj_stack_ptr; - uint16 stack_size = (uint16)rtcb->adj_stack_size; + uint16_t) sp = up_getsp(); + uint16_t) stack_base = (uint16_t))rtcb->adj_stack_ptr; + uint16_t) stack_size = (uint16_t))rtcb->adj_stack_size; lldbg("stack_base: %04x\n", stack_base); lldbg("stack_size: %04x\n", stack_size); @@ -95,11 +95,11 @@ static void up_stackdump(void) } else { - uint16 stack = sp & ~0x0f; + uint16_t) stack = sp & ~0x0f; - for (stack = sp & ~0x0f; stack < stack_base; stack += 8*sizeof(uint16)) + for (stack = sp & ~0x0f; stack < stack_base; stack += 8*sizeof(uint16_t))) { - uint16 *ptr = (uint16*)stack; + uint16_t) *ptr = (uint16_t)*)stack; lldbg("%04x: %04x %04x %04x %04x %04x %04x %04x %04x\n", stack, ptr[0], ptr[1], ptr[2], ptr[3], ptr[4], ptr[5], ptr[6], ptr[7]); diff --git a/nuttx/arch/z80/src/common/up_unblocktask.c b/nuttx/arch/z80/src/common/up_unblocktask.c index aa09342c6..33d98e864 100644 --- a/nuttx/arch/z80/src/common/up_unblocktask.c +++ b/nuttx/arch/z80/src/common/up_unblocktask.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/common/up_unblocktask.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <sched.h> #include <debug.h> diff --git a/nuttx/arch/z80/src/common/up_usestack.c b/nuttx/arch/z80/src/common/up_usestack.c index c73e99bc1..7f22e9ce6 100644 --- a/nuttx/arch/z80/src/common/up_usestack.c +++ b/nuttx/arch/z80/src/common/up_usestack.c @@ -38,11 +38,14 @@ ************************************************************/ #include <nuttx/config.h> + #include <sys/types.h> +#include <stdint.h> #include <sched.h> #include <debug.h> #include <nuttx/kmalloc.h> #include <nuttx/arch.h> + #include "up_internal.h" /************************************************************ @@ -99,7 +102,7 @@ int up_use_stack(_TCB *tcb, void *stack, size_t stack_size) * referenced as positive word offsets from sp. */ - top_of_stack = (uint32)tcb->stack_alloc_ptr + stack_size - 4; + top_of_stack = (uint32_t)tcb->stack_alloc_ptr + stack_size - 4; /* The Arm7Tdmi stack must be aligned at word (4 byte) * boundaries. If necessary top_of_stack must be rounded @@ -107,7 +110,7 @@ int up_use_stack(_TCB *tcb, void *stack, size_t stack_size) */ top_of_stack &= ~3; - size_of_stack = top_of_stack - (uint32)tcb->stack_alloc_ptr + 4; + size_of_stack = top_of_stack - (uint32_t)tcb->stack_alloc_ptr + 4; /* Save the adjusted stack values in the _TCB */ diff --git a/nuttx/arch/z80/src/ez80/chip.h b/nuttx/arch/z80/src/ez80/chip.h index ca5745f31..3402943ae 100644 --- a/nuttx/arch/z80/src/ez80/chip.h +++ b/nuttx/arch/z80/src/ez80/chip.h @@ -2,7 +2,7 @@ * arch/z80/src/ez80/chip.h * arch/z80/src/chip/chip.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -41,6 +41,10 @@ * Included Files ************************************************************************************/ +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif + /************************************************************************************ * Definitions ************************************************************************************/ @@ -78,7 +82,7 @@ extern "C" { #define EXTERN extern #endif -EXTERN uint32 ez80_systemclock; +EXTERN uint32_t ez80_systemclock; /************************************************************************************ * Public Function Prototypes diff --git a/nuttx/arch/z80/src/ez80/ez80_clock.c b/nuttx/arch/z80/src/ez80/ez80_clock.c index 4f3134624..8446e8124 100644 --- a/nuttx/arch/z80/src/ez80/ez80_clock.c +++ b/nuttx/arch/z80/src/ez80/ez80_clock.c @@ -38,7 +38,7 @@ ****************************************************************************/ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include "arch/board/board.h" @@ -54,7 +54,7 @@ * Private Data ****************************************************************************/ -uint32 ez80_systemclock = EZ80_SYS_CLK_FREQ; +uint32_t ez80_systemclock = EZ80_SYS_CLK_FREQ; /**************************************************************************** * Private Functions diff --git a/nuttx/arch/z80/src/ez80/ez80_copystate.c b/nuttx/arch/z80/src/ez80/ez80_copystate.c index 842457982..976817c6e 100644 --- a/nuttx/arch/z80/src/ez80/ez80_copystate.c +++ b/nuttx/arch/z80/src/ez80/ez80_copystate.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/ez80/ez80_copystate.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <arch/irq.h> #include "chip/switch.h" diff --git a/nuttx/arch/z80/src/ez80/ez80_emac.c b/nuttx/arch/z80/src/ez80/ez80_emac.c index bbfe74675..75b96a6be 100644 --- a/nuttx/arch/z80/src/ez80/ez80_emac.c +++ b/nuttx/arch/z80/src/ez80/ez80_emac.c @@ -43,6 +43,8 @@ #include <nuttx/config.h> #if defined(CONFIG_NET) && defined(CONFIG_EZ80_EMAC) +#include <stdint.h> +#include <stdbool.h> #include <time.h> #include <string.h> #include <debug.h> @@ -242,21 +244,21 @@ #if defined(CONFIG_DEBUG) && defined(CONFIG_DEBUG_NET) struct ez80mac_statistics_s { - uint32 rx_int; /* Number of Rx interrupts received */ - uint32 rx_packets; /* Number of packets received (sum of the following): */ - uint32 rx_ip; /* Number of Rx IP packets received */ - uint32 rx_arp; /* Number of Rx ARP packets received */ - uint32 rx_dropped; /* Number of dropped, unsupported Rx packets */ - uint32 rx_nok; /* Number of Rx packets received without OK bit */ - uint32 rx_errors; /* Number of Rx errors (rx_overerrors + rx_nok) */ - uint32 rx_ovrerrors; /* Number of FIFO overrun errors */ - uint32 tx_int; /* Number of Tx interrupts received */ - uint32 tx_packets; /* Number of Tx descriptors queued */ - uint32 tx_errors; /* Number of Tx errors (sum of the following) */ - uint32 tx_abterrors; /* Number of aborted Tx descriptors */ - uint32 tx_fsmerrors; /* Number of Tx state machine errors */ - uint32 tx_timeouts; /* Number of Tx timeout errors */ - uint32 sys_int; /* Number of system interrupts received */ + uint32_t rx_int; /* Number of Rx interrupts received */ + uint32_t rx_packets; /* Number of packets received (sum of the following): */ + uint32_t rx_ip; /* Number of Rx IP packets received */ + uint32_t rx_arp; /* Number of Rx ARP packets received */ + uint32_t rx_dropped; /* Number of dropped, unsupported Rx packets */ + uint32_t rx_nok; /* Number of Rx packets received without OK bit */ + uint32_t rx_errors; /* Number of Rx errors (rx_overerrors + rx_nok) */ + uint32_t rx_ovrerrors; /* Number of FIFO overrun errors */ + uint32_t tx_int; /* Number of Tx interrupts received */ + uint32_t tx_packets; /* Number of Tx descriptors queued */ + uint32_t tx_errors; /* Number of Tx errors (sum of the following) */ + uint32_t tx_abterrors; /* Number of aborted Tx descriptors */ + uint32_t tx_fsmerrors; /* Number of Tx state machine errors */ + uint32_t tx_timeouts; /* Number of Tx timeout errors */ + uint32_t sys_int; /* Number of system interrupts received */ }; # define _MKFIELD(a,b,c) a->b##c # define EMAC_STAT(priv,name) _MKFIELD(priv,stat.,name)++ @@ -303,10 +305,10 @@ struct ez80emac_driver_s FAR struct ez80emac_desc_s *rxnext; FAR struct ez80emac_desc_s *rxendp1; - boolean bifup; /* TRUE:ifup FALSE:ifdown */ - boolean blinkok; /* TRUE:successful MII autonegotiation */ - boolean bfullduplex; /* TRUE:full duplex */ - boolean b100mbs; /* TRUE:100Mbp */ + bool bifup; /* true:ifup false:ifdown */ + bool blinkok; /* true:successful MII autonegotiation */ + bool bfullduplex; /* true:full duplex */ + bool b100mbs; /* true:100Mbp */ WDOG_ID txpoll; /* TX poll timer */ WDOG_ID txtimeout; /* TX timeout timer */ @@ -336,49 +338,49 @@ static struct ez80emac_driver_s g_emac; /* MII logic */ -static void ez80emac_waitmiibusy(void); -static void ez80emac_miiwrite(FAR struct ez80emac_driver_s *priv, ubyte offset, - uint16 value); -static uint16 ez80emac_miiread(FAR struct ez80emac_driver_s *priv, uint32 offset); -static boolean ez80emac_miipoll(FAR struct ez80emac_driver_s *priv, uint32 offset, - uint16 bits, boolean bclear); -static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv); +static void ez80emac_waitmiibusy(void); +static void ez80emac_miiwrite(FAR struct ez80emac_driver_s *priv, uint8_t offset, + uint16_t value); +static uint16_t ez80emac_miiread(FAR struct ez80emac_driver_s *priv, uint32_t offset); +static bool ez80emac_miipoll(FAR struct ez80emac_driver_s *priv, uint32_t offset, + uint16_t bits, bool bclear); +static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv); /* Multi-cast filtering */ #ifdef CONFIG_EZ80_MCFILTER -static void ez80emac_machash(FAR ubyte *mac, int *ndx, int *bitno) +static void ez80emac_machash(FAR uint8_t *mac, int *ndx, int *bitno) #endif /* TX/RX logic */ -static int ez80emac_transmit(struct ez80emac_driver_s *priv); -static int ez80emac_uiptxpoll(struct uip_driver_s *dev); +static int ez80emac_transmit(struct ez80emac_driver_s *priv); +static int ez80emac_uiptxpoll(struct uip_driver_s *dev); static inline FAR struct ez80emac_desc_s *ez80emac_rwp(void); static inline FAR struct ez80emac_desc_s *ez80emac_rrp(void); -static int ez80emac_receive(struct ez80emac_driver_s *priv); +static int ez80emac_receive(struct ez80emac_driver_s *priv); /* Interrupt handling */ -static int ez80emac_txinterrupt(int irq, FAR void *context); -static int ez80emac_rxinterrupt(int irq, FAR void *context); -static int ez80emac_sysinterrupt(int irq, FAR void *context); +static int ez80emac_txinterrupt(int irq, FAR void *context); +static int ez80emac_rxinterrupt(int irq, FAR void *context); +static int ez80emac_sysinterrupt(int irq, FAR void *context); /* Watchdog timer expirations */ -static void ez80emac_polltimer(int argc, uint32 arg, ...); -static void ez80emac_txtimeout(int argc, uint32 arg, ...); +static void ez80emac_polltimer(int argc, uint32_t arg, ...); +static void ez80emac_txtimeout(int argc, uint32_t arg, ...); /* NuttX callback functions */ -static int ez80emac_ifup(struct uip_driver_s *dev); -static int ez80emac_ifdown(struct uip_driver_s *dev); -static int ez80emac_txavail(struct uip_driver_s *dev); +static int ez80emac_ifup(struct uip_driver_s *dev); +static int ez80emac_ifdown(struct uip_driver_s *dev); +static int ez80emac_txavail(struct uip_driver_s *dev); /* Initialization */ -static int ez80_emacinitialize(void); +static int ez80_emacinitialize(void); /**************************************************************************** * Private Functions @@ -421,9 +423,9 @@ static void ez80emac_waitmiibusy(void) * ****************************************************************************/ -static void ez80emac_miiwrite(FAR struct ez80emac_driver_s *priv, ubyte offset, uint16 value) +static void ez80emac_miiwrite(FAR struct ez80emac_driver_s *priv, uint8_t offset, uint16_t value) { - ubyte regval; + uint8_t regval; /* Wait for any preceding MII management operation to complete */ @@ -461,9 +463,9 @@ static void ez80emac_miiwrite(FAR struct ez80emac_driver_s *priv, ubyte offset, * ****************************************************************************/ -static uint16 ez80emac_miiread(FAR struct ez80emac_driver_s *priv, uint32 offset) +static uint16_t ez80emac_miiread(FAR struct ez80emac_driver_s *priv, uint32_t offset) { - ubyte regval; + uint8_t regval; /* Wait for any preceding MII management operation to complete */ @@ -483,7 +485,7 @@ static uint16 ez80emac_miiread(FAR struct ez80emac_driver_s *priv, uint32 offset /* Wait for MII management operation to complete */ ez80emac_waitmiibusy(); - return ((uint16)inp(EZ80_EMAC_PRSD_H) << 8 | inp(EZ80_EMAC_PRSD_L)); + return ((uint16_t)inp(EZ80_EMAC_PRSD_H) << 8 | inp(EZ80_EMAC_PRSD_L)); } /**************************************************************************** @@ -497,18 +499,18 @@ static uint16 ez80emac_miiread(FAR struct ez80emac_driver_s *priv, uint32 offset * priv - Reference to the driver state structure * offset - Register offset in PMD * bits - Selects set of bits to wait for - * bclear - TRUE:Return true when all bits in 'bits' are 0 - * FALSE:Return true when one or more bits in 'bits' are 1 + * bclear - true:Return true when all bits in 'bits' are 0 + * false:Return true when one or more bits in 'bits' are 1 * * Returned Value: - * TRUE:Bit has requested polarity; FALSE: EMAC_MXPOLLLOOPS exceeded + * true:Bit has requested polarity; false: EMAC_MXPOLLLOOPS exceeded * ****************************************************************************/ -static boolean ez80emac_miipoll(FAR struct ez80emac_driver_s *priv, uint32 offset, - uint16 bits, boolean bclear) +static bool ez80emac_miipoll(FAR struct ez80emac_driver_s *priv, uint32_t offset, + uint16_t bits, bool bclear) { - uint16 value; + uint16_t value; int i; for (i = 0; i < EMAC_MXPOLLLOOPS; i++) @@ -518,18 +520,18 @@ static boolean ez80emac_miipoll(FAR struct ez80emac_driver_s *priv, uint32 offse { if ((value & bits) == 0) { - return TRUE; + return true; } } else { if ((value & bits) != 0) { - return TRUE; + return true; } } } - return FALSE; + return false; } /**************************************************************************** @@ -542,19 +544,19 @@ static boolean ez80emac_miipoll(FAR struct ez80emac_driver_s *priv, uint32 offse * priv - Reference to the driver state structure * offset - Register offset in PMD * bits - Selects set of bits to wait for - * bclear - TRUE:Return true when all bits in 'bits' are 0 - * FALSE:Return true when one or more bits in 'bits' are 1 + * bclear - true:Return true when all bits in 'bits' are 0 + * false:Return true when one or more bits in 'bits' are 1 * * Returned Value: - * TRUE:Bit has requested polarity; FALSE: EMAC_MXPOLLLOOPS exceeded + * true:Bit has requested polarity; false: EMAC_MXPOLLLOOPS exceeded * ****************************************************************************/ #ifdef CONFIG_EZ80_PHYAM79C874 static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) { - uint16 phyval; - boolean bauto; + uint16_t phyval; + bool bauto; int ret = OK; int i; @@ -584,12 +586,12 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) if (phyval & MII_MSR_ANEGABLE) { phyval = MII_MCR_ANRESTART | MII_MCR_ANENABLE; - bauto = TRUE; + bauto = true; } else { phyval = 0; - bauto = FALSE; + bauto = false; /* PADEN - EMAC pads all short frames by adding zeroes to the end of * the data field. This bit is used in conjunction with ADPADN @@ -701,10 +703,10 @@ dumpregs: #else static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) { - uint16 advertise; - uint16 lpa; - uint16 mcr; - ubyte regval; + uint16_t advertise; + uint16_t lpa; + uint16_t mcr; + uint8_t regval; /* Start auto-negotiation */ @@ -715,28 +717,28 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) /* Wait for auto-negotiation to start */ - if (!ez80emac_miipoll(priv, MII_MCR, MII_MCR_ANRESTART, FALSE)) + if (!ez80emac_miipoll(priv, MII_MCR, MII_MCR_ANRESTART, false)) { ndbg("Autonegotiation didn't start.\n"); } /* Wait for auto-negotiation to complete */ - if (!ez80emac_miipoll(priv, MII_MSR, MII_MSR_ANEGCOMPLETE, TRUE)) + if (!ez80emac_miipoll(priv, MII_MSR, MII_MSR_ANEGCOMPLETE, true)) { ndbg("Autonegotiation didn't complete.\n"); } /* Wait link */ - if (!ez80emac_miipoll(priv, MII_MSR, MII_MSR_LINKSTATUS, TRUE)) + if (!ez80emac_miipoll(priv, MII_MSR, MII_MSR_LINKSTATUS, true)) { ndbg("Link is down!\n"); - priv->blinkok = FALSE; + priv->blinkok = false; } else { - priv->blinkok = TRUE; + priv->blinkok = true; } /* Read capable media type */ @@ -753,8 +755,8 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) regval = inp(EZ80_EMAC_CFG1); regval |= EMAC_CFG1_FULLHD; /* Enable full duplex mode */ outp(EZ80_EMAC_CFG1, regval); - priv->b100mbs = TRUE; - priv->bfullduplex = TRUE; + priv->b100mbs = true; + priv->bfullduplex = true; } /* Check for 100BASETX half duplex */ @@ -765,8 +767,8 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) regval = inp(EZ80_EMAC_CFG1); regval &= ~EMAC_CFG1_FULLHD; /* Disable full duplex mode */ outp(EZ80_EMAC_CFG1, regval); - priv->b100mbs = TRUE; - priv->bfullduplex = FALSE; + priv->b100mbs = true; + priv->bfullduplex = false; } /* Check for 10BASETX full duplex */ @@ -777,8 +779,8 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) regval = inp(EZ80_EMAC_CFG1); regval |= EMAC_CFG1_FULLHD; /* Enable full duplex mode */ outp(EZ80_EMAC_CFG1, regval); - priv->b100mbs = FALSE; - priv->bfullduplex = TRUE; + priv->b100mbs = false; + priv->bfullduplex = true; } /* Check for 10BASETX half duplex */ @@ -789,8 +791,8 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) regval = inp(EZ80_EMAC_CFG1); regval &= ~EMAC_CFG1_FULLHD; /* Disable full duplex mode */ outp(EZ80_EMAC_CFG1, regval); - priv->b100mbs = FALSE; - priv->bfullduplex = FALSE; + priv->b100mbs = false; + priv->bfullduplex = false; } else { @@ -798,8 +800,8 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) regval = inp(EZ80_EMAC_CFG1); regval &= ~EMAC_CFG1_FULLHD; /* Disable full duplex mode */ outp(EZ80_EMAC_CFG1, regval); - priv->b100mbs = FALSE; - priv->bfullduplex = FALSE; + priv->b100mbs = false; + priv->bfullduplex = false; } /* Set MII control */ @@ -847,7 +849,7 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) * Parameters: * priv - Reference to the driver state structure * mac - The MAC address to add - * enable - TRUE: Enable filtering on this address; FALSE: disable + * enable - true: Enable filtering on this address; false: disable * * Returned Value: * None @@ -855,10 +857,10 @@ static int ez80emac_miiconfigure(FAR struct ez80emac_driver_s *priv) ****************************************************************************/ #ifdef CONFIG_EZ80_MCFILTER -static void ez80emac_machash(FAR ubyte *mac, int *ndx, int *bitno) +static void ez80emac_machash(FAR uint8_t *mac, int *ndx, int *bitno) { - uint32 hash; - uint32 crc32; + uint32_t hash; + uint32_t crc32; int i; int j; @@ -867,7 +869,7 @@ static void ez80emac_machash(FAR ubyte *mac, int *ndx, int *bitno) crc32 = 0xffffffff; for (i = 0; i < 6; i++) { - crc32 ^= (uint32)mac[i] & 0x0f; + crc32 ^= (uint32_t)mac[i] & 0x0f; for (j = 0; j < 4; j++) { if (crc32 & 1) @@ -880,7 +882,7 @@ static void ez80emac_machash(FAR ubyte *mac, int *ndx, int *bitno) } } - crc32 ^= (uint32)mac[i] >> 4; + crc32 ^= (uint32_t)mac[i] >> 4; for (j = 0; j < 4; j++) { if (crc32 & 1) @@ -936,11 +938,11 @@ static int ez80emac_transmit(struct ez80emac_driver_s *priv) { FAR struct ez80emac_desc_s *txdesc; FAR struct ez80emac_desc_s *txnext; - ubyte *psrc; - ubyte *pdest; - uint24 len; + uint8_t *psrc; + uint8_t *pdest; + uint24_t len; irqstate_t flags; - ubyte regval; + uint8_t regval; /* Careful: This function can be called from outside of the interrupt * handler and, therefore, may be suspended when debug output is generated! @@ -969,14 +971,14 @@ static int ez80emac_transmit(struct ez80emac_driver_s *priv) txdesc = priv->txnext; len = EMAC_PKTBUF_ALIGN(priv->dev.d_len + SIZEOF_EMACSDESC); - txnext = (FAR struct ez80emac_desc_s *)((ubyte*)txdesc + len); + txnext = (FAR struct ez80emac_desc_s *)((uint8_t*)txdesc + len); /* Handle wraparound to the beginning of the TX region */ - if ((ubyte*)txnext + SIZEOF_EMACSDESC >= (ubyte*)priv->rxstart) + if ((uint8_t*)txnext + SIZEOF_EMACSDESC >= (uint8_t*)priv->rxstart) { txnext = (FAR struct ez80emac_desc_s *) - ((ubyte*)priv->txstart + ((ubyte*)txnext - (ubyte*)priv->rxstart)); + ((uint8_t*)priv->txstart + ((uint8_t*)txnext - (uint8_t*)priv->rxstart)); } priv->txnext = txnext; @@ -987,8 +989,8 @@ static int ez80emac_transmit(struct ez80emac_driver_s *priv) /* Copy the data to the next packet in the Tx buffer (handling wraparound) */ psrc = priv->dev.d_buf; - pdest = (ubyte*)txdesc + SIZEOF_EMACSDESC; - len = (ubyte*)priv->rxstart - pdest; + pdest = (uint8_t*)txdesc + SIZEOF_EMACSDESC; + len = (uint8_t*)priv->rxstart - pdest; if (len >= priv->dev.d_len) { /* The entire packet will fit into the EMAC SRAM without wrapping */ @@ -1014,7 +1016,7 @@ static int ez80emac_transmit(struct ez80emac_driver_s *priv) * perform the transmission on its next polling cycle. */ - txdesc->np = (uint24)priv->txnext; + txdesc->np = (uint24_t)priv->txnext; txdesc->pktsize = priv->dev.d_len; txdesc->stat = EMAC_TXDESC_OWNER; @@ -1033,7 +1035,7 @@ static int ez80emac_transmit(struct ez80emac_driver_s *priv) /* Setup the TX timeout watchdog (perhaps restarting the timer) */ - (void)wd_start(priv->txtimeout, EMAC_TXTIMEOUT, ez80emac_txtimeout, 1, (uint32)priv); + (void)wd_start(priv->txtimeout, EMAC_TXTIMEOUT, ez80emac_txtimeout, 1, (uint32_t)priv); return OK; } @@ -1102,7 +1104,7 @@ static int ez80emac_uiptxpoll(struct uip_driver_s *dev) static inline FAR struct ez80emac_desc_s *ez80emac_rwp(void) { return (FAR struct ez80emac_desc_s *) - (CONFIG_EZ80_RAMADDR + ((uint24)inp(EZ80_EMAC_RWP_H) << 8) + (uint24)inp(EZ80_EMAC_RWP_L)); + (CONFIG_EZ80_RAMADDR + ((uint24_t)inp(EZ80_EMAC_RWP_H) << 8) + (uint24_t)inp(EZ80_EMAC_RWP_L)); } /**************************************************************************** @@ -1122,7 +1124,7 @@ static inline FAR struct ez80emac_desc_s *ez80emac_rwp(void) static inline FAR struct ez80emac_desc_s *ez80emac_rrp(void) { return (FAR struct ez80emac_desc_s *) - (CONFIG_EZ80_RAMADDR + ((uint24)inp(EZ80_EMAC_RRP_H) << 8) + (uint24)inp(EZ80_EMAC_RRP_L)); + (CONFIG_EZ80_RAMADDR + ((uint24_t)inp(EZ80_EMAC_RRP_H) << 8) + (uint24_t)inp(EZ80_EMAC_RRP_L)); } /**************************************************************************** @@ -1148,8 +1150,8 @@ static int ez80emac_receive(struct ez80emac_driver_s *priv) { FAR struct ez80emac_desc_s *rxdesc = priv->rxnext; FAR struct ez80emac_desc_s *rwp; - ubyte *psrc; - ubyte *pdest; + uint8_t *psrc; + uint8_t *pdest; int pktlen; int npackets; @@ -1208,14 +1210,14 @@ static int ez80emac_receive(struct ez80emac_driver_s *priv) /* Copy the data data from the hardware to priv->dev.d_buf */ - psrc = (FAR ubyte*)priv->rxnext + SIZEOF_EMACSDESC; + psrc = (FAR uint8_t*)priv->rxnext + SIZEOF_EMACSDESC; pdest = priv->dev.d_buf; /* Check for wraparound */ - if ((FAR ubyte*)(psrc + pktlen) > (FAR ubyte*)priv->rxendp1) + if ((FAR uint8_t*)(psrc + pktlen) > (FAR uint8_t*)priv->rxendp1) { - int nbytes = (int)((FAR ubyte*)priv->rxendp1 - (FAR ubyte*)psrc); + int nbytes = (int)((FAR uint8_t*)priv->rxendp1 - (FAR uint8_t*)psrc); nvdbg("RX wraps after %d bytes\n", nbytes + SIZEOF_EMACSDESC); memcpy(pdest, psrc, nbytes); @@ -1249,8 +1251,8 @@ static int ez80emac_receive(struct ez80emac_driver_s *priv) * and the RRP to determine how many packets remain in the Rx buffer. */ - outp(EZ80_EMAC_RRP_L, (ubyte)((uint24)rxdesc & 0xff)); - outp(EZ80_EMAC_RRP_H, (ubyte)(((uint24)rxdesc >> 8) & 0xff)); + outp(EZ80_EMAC_RRP_L, (uint8_t)((uint24_t)rxdesc & 0xff)); + outp(EZ80_EMAC_RRP_H, (uint8_t)(((uint24_t)rxdesc >> 8) & 0xff)); nvdbg("rxnext=%p {%06x, %u, %04x} rrp=%06x rwp=%06x blkslft=%02x\n", rxdesc, rxdesc->np, rxdesc->pktsize, rxdesc->stat, @@ -1328,8 +1330,8 @@ static int ez80emac_txinterrupt(int irq, FAR void *context) { FAR struct ez80emac_driver_s *priv = &g_emac; FAR struct ez80emac_desc_s *txhead = priv->txhead; - ubyte regval; - ubyte istat; + uint8_t regval; + uint8_t istat; /* EMAC Tx interrupts: * @@ -1432,7 +1434,7 @@ static int ez80emac_txinterrupt(int irq, FAR void *context) static int ez80emac_rxinterrupt(int irq, FAR void *context) { FAR struct ez80emac_driver_s *priv = &g_emac; - ubyte istat; + uint8_t istat; /* EMAC Rx interrupts: * @@ -1477,8 +1479,8 @@ static int ez80emac_rxinterrupt(int irq, FAR void *context) static int ez80emac_sysinterrupt(int irq, FAR void *context) { FAR struct ez80emac_driver_s *priv = &g_emac; - ubyte events; - ubyte istat; + uint8_t events; + uint8_t istat; /* EMAC system interrupts : * @@ -1553,7 +1555,7 @@ static int ez80emac_sysinterrupt(int irq, FAR void *context) * ****************************************************************************/ -static void ez80emac_txtimeout(int argc, uint32 arg, ...) +static void ez80emac_txtimeout(int argc, uint32_t arg, ...) { FAR struct ez80emac_driver_s *priv = (FAR struct ez80emac_driver_s *)arg; irqstate_t flags; @@ -1592,7 +1594,7 @@ static void ez80emac_txtimeout(int argc, uint32 arg, ...) * ****************************************************************************/ -static void ez80emac_polltimer(int argc, uint32 arg, ...) +static void ez80emac_polltimer(int argc, uint32_t arg, ...) { struct ez80emac_driver_s *priv = (struct ez80emac_driver_s *)arg; @@ -1625,7 +1627,7 @@ static void ez80emac_polltimer(int argc, uint32 arg, ...) static int ez80emac_ifup(FAR struct uip_driver_s *dev) { FAR struct ez80emac_driver_s *priv = (FAR struct ez80emac_driver_s *)dev->d_private; - ubyte regval; + uint8_t regval; int ret; ndbg("Bringing up: MAC %02x:%02x:%02x:%02x:%02x:%02x\n", @@ -1688,11 +1690,11 @@ static int ez80emac_ifup(FAR struct uip_driver_s *dev) /* Set and activate a timer process */ - (void)wd_start(priv->txpoll, EMAC_WDDELAY, ez80emac_polltimer, 1, (uint32)priv); + (void)wd_start(priv->txpoll, EMAC_WDDELAY, ez80emac_polltimer, 1, (uint32_t)priv); /* Enable the Ethernet interrupts */ - priv->bifup = TRUE; + priv->bifup = true; up_enable_irq(EZ80_EMACRX_IRQ); up_enable_irq(EZ80_EMACTX_IRQ); up_enable_irq(EZ80_EMACSYS_IRQ); @@ -1721,7 +1723,7 @@ static int ez80emac_ifdown(struct uip_driver_s *dev) { struct ez80emac_driver_s *priv = (struct ez80emac_driver_s *)dev->d_private; irqstate_t flags; - ubyte regval; + uint8_t regval; /* Disable the Ethernet interrupt */ @@ -1745,7 +1747,7 @@ static int ez80emac_ifdown(struct uip_driver_s *dev) outp(EZ80_EMAC_PTMR, 0); - priv->bifup = FALSE; + priv->bifup = false; irqrestore(flags); return OK; } @@ -1809,8 +1811,8 @@ static int ez80emac_txavail(struct uip_driver_s *dev) static int ez80_emacinitialize(void) { struct ez80emac_driver_s *priv = &g_emac; - uint24 addr; - ubyte regval; + uint24_t addr; + uint8_t regval; int ret; /* Reset the EMAC hardware */ @@ -1838,8 +1840,8 @@ static int ez80_emacinitialize(void) */ addr = CONFIG_EZ80_RAMADDR; - outp(EZ80_EMAC_TLBP_L, (ubyte)(addr & 0xff)); - outp(EZ80_EMAC_TLBP_H, (ubyte)((addr >> 8) & 0xff)); + outp(EZ80_EMAC_TLBP_L, (uint8_t)(addr & 0xff)); + outp(EZ80_EMAC_TLBP_H, (uint8_t)((addr >> 8) & 0xff)); priv->txstart = (FAR struct ez80emac_desc_s *)(addr); priv->txnext = priv->txstart; @@ -1860,8 +1862,8 @@ static int ez80_emacinitialize(void) */ addr += EMAC_TXBUFSIZE; - outp(EZ80_EMAC_BP_L, (ubyte)(addr & 0xff)); - outp(EZ80_EMAC_BP_H, (ubyte)((addr >> 8) & 0xff)); + outp(EZ80_EMAC_BP_L, (uint8_t)(addr & 0xff)); + outp(EZ80_EMAC_BP_H, (uint8_t)((addr >> 8) & 0xff)); priv->rxstart = (FAR struct ez80emac_desc_s *)(addr); priv->rxnext = priv->rxstart; @@ -1887,8 +1889,8 @@ static int ez80_emacinitialize(void) * is limited to a minimum of 32 bytes, the last five bits are always zero. */ - outp(EZ80_EMAC_RRP_L, (ubyte)(addr & 0xff)); - outp(EZ80_EMAC_RRP_H, (ubyte)((addr >> 8) & 0xff)); + outp(EZ80_EMAC_RRP_L, (uint8_t)(addr & 0xff)); + outp(EZ80_EMAC_RRP_H, (uint8_t)((addr >> 8) & 0xff)); nvdbg("rrp=%02x%02x rwp=%02x%02x\n", inp(EZ80_EMAC_RRP_H), inp(EZ80_EMAC_RRP_L), @@ -1899,8 +1901,8 @@ static int ez80_emacinitialize(void) */ addr += EMAC_RXBUFSIZE; - outp(EZ80_EMAC_RHBP_L, (ubyte)(addr & 0xff)); - outp(EZ80_EMAC_RHBP_H, (ubyte)((addr >> 8) & 0xff)); + outp(EZ80_EMAC_RHBP_L, (uint8_t)(addr & 0xff)); + outp(EZ80_EMAC_RHBP_H, (uint8_t)((addr >> 8) & 0xff)); priv->rxendp1 = (FAR struct ez80emac_desc_s *)addr; nvdbg("rxendp1=%p rhbp=%02x%02x\n", @@ -1932,7 +1934,7 @@ static int ez80_emacinitialize(void) up_udelay(500); ez80emac_miiwrite(priv, MII_MCR, MII_MCR_RESET); - if (!ez80emac_miipoll(priv, MII_MCR, MII_MCR_RESET, FALSE)) + if (!ez80emac_miipoll(priv, MII_MCR, MII_MCR_RESET, false)) { ndbg("PHY reset error.\n"); } @@ -1987,7 +1989,7 @@ static int ez80_emacinitialize(void) /* PHY reset */ ez80emac_miiwrite(priv, MII_MCR, MII_MCR_RESET); - if (!ez80emac_miipoll(priv, MII_MCR, MII_MCR_RESET, FALSE)) + if (!ez80emac_miipoll(priv, MII_MCR, MII_MCR_RESET, false)) { ndbg("PHY reset error.\n"); ret = -EIO; @@ -2095,7 +2097,7 @@ errout: * Parameters: * dev - Reference to the uIP driver state structure * mac - The MAC address to add - * enable - TRUE: Enable filtering on this address; FALSE: disable + * enable - true: Enable filtering on this address; false: disable * * Returned Value: * OK on success; Negated errno on failure. @@ -2103,10 +2105,10 @@ errout: ****************************************************************************/ #ifdef CONFIG_ARCH_MCFILTER -int up_multicastfilter(FAR struct uip_driver_s *dev, FAR ubyte *mac, boolean enable) +int up_multicastfilter(FAR struct uip_driver_s *dev, FAR uint8_t *mac, bool enable) { FAR struct ez80emac_driver_s *priv = (FAR struct ez80emac_driver_s *)dev->priv; - ubyte regval; + uint8_t regval; int ndx; int bit; int i; diff --git a/nuttx/arch/z80/src/ez80/ez80_i2c.c b/nuttx/arch/z80/src/ez80/ez80_i2c.c index a1ca6c297..d9defb0cf 100644 --- a/nuttx/arch/z80/src/ez80/ez80_i2c.c +++ b/nuttx/arch/z80/src/ez80/ez80_i2c.c @@ -1,931 +1,932 @@ -/****************************************************************************
- * arch/z80/src/ez80/ez80_i2c.c
- *
- * Copyright(C) 2009 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-
-#include <sys/types.h>
-#include <stdlib.h>
-#include <semaphore.h>
-#include <errno.h>
-#include <assert.h>
-#include <debug.h>
-
-#include <nuttx/i2c.h>
-#include <arch/io.h>
-#include <arch/board/board.h>
-
-#include "ez80f91.h"
-#include "ez80f91_i2c.h"
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/****************************************************************************
- * Private Types
- ****************************************************************************/
-
-struct ez80_i2cdev_s
-{
- const struct i2c_ops_s *ops; /* I2C vtable */
- uint16 ccr; /* Clock control register value */
- uint16 addr; /* 7- or 10-bit address */
- ubyte addr10 : 1; /* 1=Address is 10-bit */
-};
-
-/****************************************************************************
- * Private Function Prototypes
- ****************************************************************************/
-
-/* Misc. Helpers */
-
-static void i2c_setccr(uint16 ccr);
-static uint16 i2c_getccr(uint32 frequency);
-static ubyte i2c_waitiflg(void);
-static void i2c_clriflg(void);
-static void i2c_start(void);
-static void i2c_stop(void);
-static int i2c_sendaddr(struct ez80_i2cdev_s *priv, ubyte readbit);
-
-/* I2C methods */
-
-static uint32 i2c_setfrequency(FAR struct i2c_dev_s *dev, uint32 frequency);
-static int i2c_setaddress(FAR struct i2c_dev_s *dev, int addr, int nbits);
-static int i2c_write(FAR struct i2c_dev_s *dev, const ubyte *buffer, int buflen);
-static int i2c_read(FAR struct i2c_dev_s *dev, ubyte *buffer, int buflen);
-
-/****************************************************************************
- * Public Function Prototypes
- ****************************************************************************/
-
-/* This function is normally prototyped int the ZiLOG header file sio.h */
-
-extern uint32 get_freq(void);
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-static ubyte g_currccr; /* Current setting of I2C CCR register */
-static boolean g_initialized; /* TRUE:I2C has been initialized */
-static sem_t g_i2csem; /* Serialize I2C transfers */
-
-const struct i2c_ops_s g_ops =
-{
- i2c_setfrequency,
- i2c_setaddress,
- i2c_write,
- i2c_read,
-};
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-/****************************************************************************
- * Name: i2c_semtake/i2c_semgive
- *
- * Description:
- * Take/Give the I2C semaphore.
- *
- * Input Parameters:
- * None
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_semtake(void)
-{
- /* Take the I2C semaphore (perhaps waiting) */
-
- while (sem_wait(&g_i2csem) != 0)
- {
- /* The only case that an error should occr here is if
- * the wait was awakened by a signal.
- */
-
- ASSERT(errno == EINTR);
- }
-}
-
-#define i2c_semgive() sem_post(&g_i2csem)
-
-/****************************************************************************
- * Name: i2c_setccr
- *
- * Description:
- * Set the current BRG value for this transaction
- *
- * Input Parameters:
- * ccr - BRG to set
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_setccr(uint16 ccr)
-{
- if (g_currccr != ccr)
- {
- outp(EZ80_I2C_CCR, ccr);
- g_currccr = ccr;
- }
-}
-
-/****************************************************************************
- * Name: i2c_getccr
- *
- * Description:
- * Calculate the BRG value
- *
- * Input Parameters:
- * fscl - The I2C frequency requested
- *
- * Returned Value:
- * Returns the actual frequency selected
- *
- ****************************************************************************/
-
-static uint16 i2c_getccr(uint32 fscl)
-{
- uint32 fsamp;
- uint32 ftmp;
- ubyte n;
- ubyte m;
-
- /* The sampling frequency is given by:
- *
- * fsamp = sysclock / 2**N
- *
- * And the I2C clock is determined by:
- *
- * fscl = sysclock / 10 / (M + 1) / 2**N
- * = fsamp / 10 / (M + 1)
- *
- * The fsmp must be >= 10 * fscl. The best solution is the smallest value of
- * N so that the sampling rate is the highest subject to:
- *
- * The minimum value of the fsamp is given by:
- */
-
- fsamp = 10 * fscl;
-
- /* Now, serarch for the smallest value of N that results in the actual
- * fsamp >= the ideal fsamp. Fortunately, we only have to check at most
- * eight values.
- */
-
- if (fsamp >= EZ80_SYS_CLK_FREQ)
- {
- ftmp = EZ80_SYS_CLK_FREQ / 10;
- n = 0;
- }
- else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 1))
- {
- ftmp = (EZ80_SYS_CLK_FREQ >> 1) / 10;
- n = 1;
- }
- else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 2))
- {
- ftmp = (EZ80_SYS_CLK_FREQ >> 2) / 10;
- n = 2;
- }
- else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 3))
- {
- ftmp = (EZ80_SYS_CLK_FREQ >> 3) / 10;
- n = 3;
- }
- else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 4))
- {
- ftmp = (EZ80_SYS_CLK_FREQ >> 4) / 10;
- n = 4;
- }
- else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 5))
- {
- ftmp = (EZ80_SYS_CLK_FREQ >> 5) / 10;
- n = 5;
- }
- else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 6))
- {
- ftmp = (EZ80_SYS_CLK_FREQ >> 6) / 10;
- n = 6;
- }
- else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 7))
- {
- ftmp = (EZ80_SYS_CLK_FREQ >> 7) / 10;
- n = 7;
- }
- else
- {
- ftmp = (EZ80_SYS_CLK_FREQ >> 7) / 10;
- fscl = ftmp;
- n = 7;
- }
-
- /* Finally, get M:
- *
- * M = (fsamp / 10) / fscl - 1 = ftmp / fscl - 1
- */
-
- m = ftmp / fscl;
- if (m > 0)
- {
- if (--m > 15)
- {
- m = 15;
- }
- }
-
- /* Return the value for CCR */
-
- return (n << I2C_CCR_NSHIFT) | (m << I2C_CCR_MSHIFT);
-}
-
-/****************************************************************************
- * Name: i2c_waitiflg
- *
- * Description:
- * In polled mode, we have to spin until the IFLG bit in the xxx register
- * goes to 1, signalling that the last send or receive is complete. This
- * could be used to generate an interrupt for a non-polled driver.
- *
- * Input Parameters:
- * priv - Device-specific state data
- * readbit - 0 or I2C_READBIT
- *
- * Returned Value:
- * The contents of the I2C_SR register at the time that IFLG became 1.
- *
- ****************************************************************************/
-
-static ubyte i2c_waitiflg(void)
-{
- while ((inp(EZ80_I2C_CTL) & I2C_CTL_IFLG) != 0);
- return inp(EZ80_I2C_SR);
-}
-
-/****************************************************************************
- * Name: i2c_clriflg
- *
- * Description:
- * Clear the IFLAG bit in the I2C_CTL register, acknowledging the event.
- * If interrupts are enabled, this would clear the interrupt status.
- *
- * Input Parameters:
- * None
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_clriflg(void)
-{
- ubyte regval = inp(EZ80_I2C_CTL);
- regval &= ~I2C_CTL_IFLG;
- outp(EZ80_I2C_CTL, regval);
-}
-
-/****************************************************************************
- * Name: i2c_start
- *
- * Description:
- * Send the START bit. IFLAG must be zero; it will go to 1 when it is
- * time to send the address.
- *
- * Input Parameters:
- * None
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_start(void)
-{
- ubyte regval = inp(EZ80_I2C_CTL);
- regval |= I2C_CTL_STA;
- outp(EZ80_I2C_CTL, regval);
-}
-
-/****************************************************************************
- * Name: i2c_stop
- *
- * Description:
- * Send the STOP bit. This terminates the I2C transfer and reverts back
- * to IDLE mode.
- *
- * Input Parameters:
- * None
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_stop(void)
-{
- ubyte regval = inp(EZ80_I2C_CTL);
- regval |= I2C_CTL_STP;
- outp(EZ80_I2C_CTL, regval);
-}
-
-/****************************************************************************
- * Name: i2c_sendaddr
- *
- * Description:
- * Send the 8- or 11-bit address for either a read or a write transaction.
- *
- * Input Parameters:
- * priv - Device-specific state data
- * readbit - 0 or I2C_READBIT
- *
- * Returned Value:
- * 0: Success, IFLG is set and DATA can be sent or received.
-
- * Or <0: Negated error value. IFLG is cleared.
- *
- * -EIO: Irrecoverable (or unexpected) error occured
- * -EAGAIN: And
- *
- ****************************************************************************/
-
-static int i2c_sendaddr(struct ez80_i2cdev_s *priv, ubyte readbit)
-{
- ubyte sr;
- int ret = OK;
-
- /* Wait for the IFLG bit to transition to 1. At this point, we should
- * have status == 8 meaning that the start bit was sent successfully.
- */
-
- sr = i2c_waitiflg();
-#ifdef CONFIG_DEBUG
- if (sr != I2C_SR_MSTART)
- {
- /* This error should never occur */
-
- dbg("Bad START status: %02x\n", sr);
- i2c_clriflg();
- return -EIO;
- }
-#endif
-
- /* Now send the address */
-
- if (!priv->addr10)
- {
- /* Load the I2C_DR with the 8-bit I2C slave address and clear the
- * IFLG. Clearing the IFLAG will cause the address to be transferred.
- */
-
- outp(EZ80_I2C_DR, (ubyte)I2C_ADDR8(priv->addr) | readbit);
- i2c_clriflg();
-
- /* And wait for the address transfer to complete */
-
- sr = i2c_waitiflg();
- if (sr != I2C_SR_MADDRWRACK && sr != I2C_SR_MADDRWR)
- {
- dbg("Bad ADDR8 status: %02x\n", sr);
- goto failure;
- }
- }
- else
- {
- /* Load the I2C_DR with upper part of the 10->16-bit I2C slave address
- * and clear the IFLG. Clearing the IFLAG will cause the address to
- * be transferred.
- */
-
- outp(EZ80_I2C_DR, (ubyte)I2C_ADDR10H(priv->addr) | readbit);
- i2c_clriflg();
-
- /* And wait for the address transfer to complete */
-
- sr = i2c_waitiflg();
- if (sr != I2C_SR_MADDRWRACK && sr != I2C_SR_MADDRWR)
- {
- dbg("Bad ADDR10H status: %02x\n", sr);
- goto failure;
- }
-
- /* Now send the lower 8 bits of the 10-bit address */
-
- outp(EZ80_I2C_DR, (ubyte)I2C_ADDR10L(priv->addr));
- i2c_clriflg();
-
- /* And wait for the address transfer to complete */
-
- sr = i2c_waitiflg();
- if (sr != I2C_SR_MADDR2WRACK && sr != I2C_SR_MADDR2WR)
- {
- dbg("Bad ADDR10L status: %02x\n", sr);
- goto failure;
- }
- }
-
- return OK;
-
- /* We don't attempt any fancy status-based error recovery */
-
-failure:
-#ifdef CONFIG_DEBUG
- switch (sr)
- {
- case I2C_SR_ARBLOST1: /* Arbitration lost in address or data byte */
- case I2C_SR_ARBLOST2: /* Arbitration lost in address as master, slave address and Write bit received, ACK transmitted */
- case I2C_SR_ARBLOST3: /* Arbitration lost in address as master, General Call address received, ACK transmitted */
- case I2C_SR_ARBLOST4: /* Arbitration lost in address as master, slave address and Read bit received, ACK transmitted */
- dbg("Arbitration lost: %02x\n", sr);
- i2c_clriflg();
- return -EAGAIN;
-
- default:
- dbg("Unexpected status: %02x\n", sr);
- i2c_clriflg();
- return -EIO;
- }
-#else
- i2c_clriflg();
- return -EAGAIN;
-#endif
-}
-
-/****************************************************************************
- * Name: i2c_setfrequency
- *
- * Description:
- * Set the I2C frequency. This frequency will be retained in the struct
- * i2c_dev_s instance and will be used with all transfers. Required.
- *
- * Input Parameters:
- * dev - Device-specific state data
- * frequency - The I2C frequency requested
- *
- * Returned Value:
- * Returns the actual frequency selected
- *
- ****************************************************************************/
-
-static uint32 i2c_setfrequency(FAR struct i2c_dev_s *dev, uint32 frequency)
-{
- FAR struct ez80_i2cdev_s *priv = (FAR struct ez80_i2cdev_s *)dev;
-
- /* Sanity Check */
-
-#ifdef CONFIG_DEBUG
- if (!dev)
- {
- dbg("Invalid inputs\n");
- return -EINVAL;
- }
-#endif
-
- /* Calculate and save the BRG (we won't apply it until the first transfer) */
-
- priv->ccr = i2c_getccr(frequency);
- return OK;
-}
-
-/****************************************************************************
- * Name: i2c_setaddress
- *
- * Description:
- * Set the I2C slave address. This frequency will be retained in the struct
- * i2c_dev_s instance and will be used with all transfers. Required.
- *
- * Input Parameters:
- * dev - Device-specific state data
- * address - The I2C slave address
- * nbits - The number of address bits provided (7 or 10)
- *
- * Returned Value:
- * Returns the actual frequency selected
- *
- ****************************************************************************/
-
-static int i2c_setaddress(FAR struct i2c_dev_s *dev, int addr, int nbits)
-{
- FAR struct ez80_i2cdev_s *priv = (FAR struct ez80_i2cdev_s *)dev;
-
- /* Sanity Check */
-
-#ifdef CONFIG_DEBUG
- if (!dev || (unsigned)addr > 0x7f || (nbits != 7 && nbits != 10))
- {
- dbg("Invalid inputs\n");
- return -EINVAL;
- }
-#endif
-
- /* Save the 7- or 10-bit address */
-
- priv->addr = addr;
- priv->addr10 = (nbits == 10);
- return OK;
-}
-
-/****************************************************************************
- * Name: i2c_write
- *
- * Description:
- * Send a block of data on I2C using the previously selected I2C
- * frequency and slave address. Each write operational will be an 'atomic'
- * operation in the sense that any other I2C actions will be serialized
- * and pend until this write completes. Required.
- *
- * Input Parameters:
- * dev - Device-specific state data
- * buffer - A pointer to the read-only buffer of data to be written to device
- * buflen - The number of bytes to send from the buffer
- *
- * Returned Value:
- * 0: success, <0: A negated errno
- *
- ****************************************************************************/
-
-static int i2c_write(FAR struct i2c_dev_s *dev, const ubyte *buffer, int buflen)
-{
- FAR struct ez80_i2cdev_s *priv = (FAR struct ez80_i2cdev_s *)dev;
- const ubyte *ptr;
- ubyte sr;
- int retry;
- int count;
- int ret;
-
-#ifdef CONFIG_DEBUG
- if (!priv || !buffer || buflen < 1)
- {
- dbg("Invalid inputs\n");
- return -EINVAL;
- }
-#endif
-
- /* Get exclusive access */
-
- i2c_semtake();
-
- /* Set the frequency */
-
- i2c_setccr(priv->ccr);
-
- /* Retry as necessary to send this whole message */
-
- for (retry = 0; retry < 100; retry++)
- {
- /* Enter MASTER TRANSMIT mode by setting the STA bit in the I2C_CTL
- * register to 1. The I2C then tests the I2C bus and transmits a START
- * condition when the bus is free.
- */
-
- i2c_start();
-
- /* When a START condition is transmitted, the IFLG bit is 1. Then we may
- * send the I2C slave address.
- */
-
- ret = i2c_sendaddr(priv, 0);
- if (ret < 0)
- {
- if (ret == -EAGAIN)
- {
- continue;
- }
- else
- {
- goto failure;
- }
- }
-
- /* Then send all of the bytes in the buffer */
-
- ptr = buffer;
- for (count = buflen; count; count--)
- {
- /* Load the I2C_DR with next data byte and clear the IFLG. Clearing
- * the IFLAG will cause the data to be transferred.
- */
-
- outp(EZ80_I2C_DR, *ptr++);
- i2c_clriflg();
-
- /* And wait for the data transfer to complete */
-
- sr = i2c_waitiflg();
- if (sr != I2C_SR_MDATAWRACK && sr != I2C_SR_MDATAWR)
- {
- dbg("Bad DATA status: %02x\n", sr);
- i2c_clriflg();
- if (sr == I2C_SR_ARBLOST1)
- {
- /* Arbitration lost, break out of the inner loop and
- * try sending the message again
- */
-
- break;
- }
-
- /* Otherwise, it is fatal (shouldn't happen) */
-
- ret = -EIO;
- goto failure;
- }
-
- /* Data byte was sent successfully. Was that the last byte? */
-
- else if (count <= 1)
- {
- /* When all bytes are transmitted, the microcontroller must
- * write a 1 to the STP bit in the I2C_CTL register. The
- * I2C then transmits a STOP condition, clears the STP bit
- * and returns to an idle state.
- */
-
- i2c_stop();
-
- ret = OK;
- goto success;
- }
- }
- }
-
- /* If we get here, we timed out without successfully sending the message */
-
- ret = -ETIMEDOUT;
-
-success:
-failure:
- i2c_semgive();
- return ret;
-}
-
-/****************************************************************************
- * Name: i2c_read
- *
- * Description:
- * Receive a block of data from I2C using the previously selected I2C
- * frequency and slave address. Each read operational will be an 'atomic'
- * operation in the sense that any other I2C actions will be serialized
- * and pend until this read completes. Required.
- *
- * Input Parameters:
- * dev - Device-specific state data
- * buffer - A pointer to a buffer of data to receive the data from the device
- * buflen - The requested number of bytes to be read
- *
- * Returned Value:
- * 0: success, <0: A negated errno
- *
- ****************************************************************************/
-
-static int i2c_read(FAR struct i2c_dev_s *dev, ubyte *buffer, int buflen)
-{
- FAR struct ez80_i2cdev_s *priv = (FAR struct ez80_i2cdev_s *)dev;
- ubyte *ptr;
- ubyte regval;
- int retry;
- int count;
- int ret;
-
-#ifdef CONFIG_DEBUG
- if (!priv || !buffer || buflen < 1)
- {
- dbg("Invalid inputs\n");
- return -EINVAL;
- }
-#endif
-
- /* Get exclusive access */
-
- i2c_semtake();
-
- /* Set the frequency */
-
- i2c_setccr(priv->ccr);
-
- /* Retry as necessary to receive the whole message */
-
- for (retry = 0; retry < 100; retry++)
- {
- /* Enter MASTER TRANSMIT mode by setting the STA bit in the I2C_CTL
- * register to 1. The I2C then tests the I2C bus and transmits a START
- * condition when the bus is free.
- */
-
- i2c_start();
-
- /* When a START condition is transmitted, the IFLG bit is 1. Then we may
- * send the I2C slave address.
- */
-
- ret = i2c_sendaddr(priv, 0);
- if (ret < 0)
- {
- if (ret == -EAGAIN)
- {
- continue;
- }
- else
- {
- goto failure;
- }
- }
-
- /* Now loop to receive each data byte */
-
- ptr = buffer;
- for (count = buflen; count; count--)
- {
- /* Is this the last byte? If so, we must NACK it */
-
- regval = inp(EZ80_I2C_CTL);
- if (count <= 1)
- {
- /* If the AAK bit is cleared to 0 during a transfer, the I2C
- * transmits a NACK bit after the next byte is received.
- */
-
- regval &= ~I2C_CTL_AAK;
- }
- else
- {
- /* If the AAK bit in the I2C_CTL register is set to 1 then an
- * ACK bit is transmitted and the IFLG bit is set after each
- * byte is received.
- */
-
- regval |= I2C_CTL_AAK;
- }
- outp(EZ80_I2C_CTL, regval);
-
- /* Wait for IFLG to be set meaning that incoming data is
- * available in the I2C_DR registers.
- */
-
- regval = i2c_waitiflg();
-
- /* Data byte received in MASTER mode, ACK transmitted */
-
- if (regval == I2C_SR_MDATARDACK)
- {
- /* Since we just ACKed the incoming byte, it must NOT be the last */
-
- DEBUGASSERT(count > 1);
-
- /* Receive the data and clear the IFLGS */
-
- *ptr++ = inp(EZ80_I2C_DR);
- i2c_clriflg();
- }
-
- /* Data byte received in MASTER mode, NACK transmitted */
-
- else if (regval == I2C_SR_MDATARDNAK)
- {
- /* Since we just NACKed the incoming byte, it must be the last */
-
- DEBUGASSERT(count <= 1);
-
- /* When all bytes are received and the NACK has been sent, then the
- * microcontroller must write 1 to the STP bit in the I2C_CTL
- * register. The I2C then transmits a STOP condition, clears
- * the STP bit and returns to an idle state.
- */
-
- i2c_stop();
- i2c_clriflg();
-
- ret = OK;
- goto success;
- }
-
- /* Arbitration lost in address or data byte */
-
- else if (regval == I2C_SR_ARBLOST1)
- {
- /* Clear the IFLG and break out of the inner loop.
- * this will cause the whole transfer to start over
- */
-
- dbg("Arbitration lost: %02x\n", regval);
- i2c_clriflg();
- break;
- }
-
- /* Unexpected status response */
-
- else
- {
- dbg("Unexpected status: %02x\n", regval);
- i2c_clriflg();
- ret = -EIO;
- goto failure;
- }
- }
- }
- ret = -ETIMEDOUT;
-
-success:
-failure:
- i2c_semgive();
- return ret;
-}
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: up_i2cinitialize
- *
- * Description:
- * Initialize the selected I2C port. And return a unique instance of struct
- * struct i2c_dev_s. This function may be called to obtain multiple
- * instances of the interface, each of which may be set up with a
- * different frequency and slave address.
- *
- * Input Parameter:
- * Port number (for hardware that has mutiple I2C interfaces)
- *
- * Returned Value:
- * Valid I2C device structre reference on succcess; a NULL on failure
- *
- ****************************************************************************/
-
-FAR struct i2c_dev_s *up_i2cinitialize(int port)
-{
- FAR struct ez80_i2cdev_s *i2c;
- uint16 ccr;
- ubyte regval;
-
- if (!g_initialized)
- {
- /* Set up some initial BRG value */
-
- ccr = i2c_getccr(100*1000);
- i2c_setccr(ccr);
-
- /* No GPIO setup is required -- I2C pints, SCL/SDA are not multiplexed */
-
- /* This semaphore enforces serialized access for I2C transfers */
-
- sem_init(&g_i2csem, 0, 1);
-
- /* Enable I2C -- but not interrupts */
-
- regval = inp(EZ80_I2C_CTL);
- regval |= I2C_CTL_ENAB;
- outp(EZ80_I2C_CTL, regval);
- }
-
- /* Now, allocate an I2C instance for this caller */
-
- i2c = (FAR struct ez80_i2cdev_s *)malloc(sizeof(FAR struct ez80_i2cdev_s));
- if (i2c)
- {
- /* Initialize the allocated instance */
-
- i2c->ops = &g_ops;
- i2c->ccr = g_currccr;
- }
- return (FAR struct i2c_dev_s *)i2c;
-}
+/**************************************************************************** + * arch/z80/src/ez80/ez80_i2c.c + * + * Copyright(C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <stdbool.h> +#include <stdlib.h> +#include <semaphore.h> +#include <errno.h> +#include <assert.h> +#include <debug.h> + +#include <nuttx/i2c.h> +#include <arch/io.h> +#include <arch/board/board.h> + +#include "ez80f91.h" +#include "ez80f91_i2c.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +struct ez80_i2cdev_s +{ + const struct i2c_ops_s *ops; /* I2C vtable */ + uint16_t ccr; /* Clock control register value */ + uint16_t addr; /* 7- or 10-bit address */ + uint8_t addr10 : 1; /* 1=Address is 10-bit */ +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +/* Misc. Helpers */ + +static void i2c_setccr(uint16_t ccr); +static uint16_t i2c_getccr(uint32_t frequency); +static uint8_t i2c_waitiflg(void); +static void i2c_clriflg(void); +static void i2c_start(void); +static void i2c_stop(void); +static int i2c_sendaddr(struct ez80_i2cdev_s *priv, uint8_t readbit); + +/* I2C methods */ + +static uint32_t i2c_setfrequency(FAR struct i2c_dev_s *dev, uint32_t frequency); +static int i2c_setaddress(FAR struct i2c_dev_s *dev, int addr, int nbits); +static int i2c_write(FAR struct i2c_dev_s *dev, const uint8_t *buffer, int buflen); +static int i2c_read(FAR struct i2c_dev_s *dev, uint8_t *buffer, int buflen); + +/**************************************************************************** + * Public Function Prototypes + ****************************************************************************/ + +/* This function is normally prototyped int the ZiLOG header file sio.h */ + +extern uint32_t get_freq(void); + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static uint8_t g_currccr; /* Current setting of I2C CCR register */ +static bool g_initialized; /* true:I2C has been initialized */ +static sem_t g_i2csem; /* Serialize I2C transfers */ + +const struct i2c_ops_s g_ops = +{ + i2c_setfrequency, + i2c_setaddress, + i2c_write, + i2c_read, +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ +/**************************************************************************** + * Name: i2c_semtake/i2c_semgive + * + * Description: + * Take/Give the I2C semaphore. + * + * Input Parameters: + * None + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_semtake(void) +{ + /* Take the I2C semaphore (perhaps waiting) */ + + while (sem_wait(&g_i2csem) != 0) + { + /* The only case that an error should occr here is if + * the wait was awakened by a signal. + */ + + ASSERT(errno == EINTR); + } +} + +#define i2c_semgive() sem_post(&g_i2csem) + +/**************************************************************************** + * Name: i2c_setccr + * + * Description: + * Set the current BRG value for this transaction + * + * Input Parameters: + * ccr - BRG to set + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_setccr(uint16_t ccr) +{ + if (g_currccr != ccr) + { + outp(EZ80_I2C_CCR, ccr); + g_currccr = ccr; + } +} + +/**************************************************************************** + * Name: i2c_getccr + * + * Description: + * Calculate the BRG value + * + * Input Parameters: + * fscl - The I2C frequency requested + * + * Returned Value: + * Returns the actual frequency selected + * + ****************************************************************************/ + +static uint16_t i2c_getccr(uint32_t fscl) +{ + uint32_t fsamp; + uint32_t ftmp; + uint8_t n; + uint8_t m; + + /* The sampling frequency is given by: + * + * fsamp = sysclock / 2**N + * + * And the I2C clock is determined by: + * + * fscl = sysclock / 10 / (M + 1) / 2**N + * = fsamp / 10 / (M + 1) + * + * The fsmp must be >= 10 * fscl. The best solution is the smallest value of + * N so that the sampling rate is the highest subject to: + * + * The minimum value of the fsamp is given by: + */ + + fsamp = 10 * fscl; + + /* Now, serarch for the smallest value of N that results in the actual + * fsamp >= the ideal fsamp. Fortunately, we only have to check at most + * eight values. + */ + + if (fsamp >= EZ80_SYS_CLK_FREQ) + { + ftmp = EZ80_SYS_CLK_FREQ / 10; + n = 0; + } + else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 1)) + { + ftmp = (EZ80_SYS_CLK_FREQ >> 1) / 10; + n = 1; + } + else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 2)) + { + ftmp = (EZ80_SYS_CLK_FREQ >> 2) / 10; + n = 2; + } + else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 3)) + { + ftmp = (EZ80_SYS_CLK_FREQ >> 3) / 10; + n = 3; + } + else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 4)) + { + ftmp = (EZ80_SYS_CLK_FREQ >> 4) / 10; + n = 4; + } + else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 5)) + { + ftmp = (EZ80_SYS_CLK_FREQ >> 5) / 10; + n = 5; + } + else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 6)) + { + ftmp = (EZ80_SYS_CLK_FREQ >> 6) / 10; + n = 6; + } + else if (fsamp >= (EZ80_SYS_CLK_FREQ >> 7)) + { + ftmp = (EZ80_SYS_CLK_FREQ >> 7) / 10; + n = 7; + } + else + { + ftmp = (EZ80_SYS_CLK_FREQ >> 7) / 10; + fscl = ftmp; + n = 7; + } + + /* Finally, get M: + * + * M = (fsamp / 10) / fscl - 1 = ftmp / fscl - 1 + */ + + m = ftmp / fscl; + if (m > 0) + { + if (--m > 15) + { + m = 15; + } + } + + /* Return the value for CCR */ + + return (n << I2C_CCR_NSHIFT) | (m << I2C_CCR_MSHIFT); +} + +/**************************************************************************** + * Name: i2c_waitiflg + * + * Description: + * In polled mode, we have to spin until the IFLG bit in the xxx register + * goes to 1, signalling that the last send or receive is complete. This + * could be used to generate an interrupt for a non-polled driver. + * + * Input Parameters: + * priv - Device-specific state data + * readbit - 0 or I2C_READBIT + * + * Returned Value: + * The contents of the I2C_SR register at the time that IFLG became 1. + * + ****************************************************************************/ + +static uint8_t i2c_waitiflg(void) +{ + while ((inp(EZ80_I2C_CTL) & I2C_CTL_IFLG) != 0); + return inp(EZ80_I2C_SR); +} + +/**************************************************************************** + * Name: i2c_clriflg + * + * Description: + * Clear the IFLAG bit in the I2C_CTL register, acknowledging the event. + * If interrupts are enabled, this would clear the interrupt status. + * + * Input Parameters: + * None + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_clriflg(void) +{ + uint8_t regval = inp(EZ80_I2C_CTL); + regval &= ~I2C_CTL_IFLG; + outp(EZ80_I2C_CTL, regval); +} + +/**************************************************************************** + * Name: i2c_start + * + * Description: + * Send the START bit. IFLAG must be zero; it will go to 1 when it is + * time to send the address. + * + * Input Parameters: + * None + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_start(void) +{ + uint8_t regval = inp(EZ80_I2C_CTL); + regval |= I2C_CTL_STA; + outp(EZ80_I2C_CTL, regval); +} + +/**************************************************************************** + * Name: i2c_stop + * + * Description: + * Send the STOP bit. This terminates the I2C transfer and reverts back + * to IDLE mode. + * + * Input Parameters: + * None + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_stop(void) +{ + uint8_t regval = inp(EZ80_I2C_CTL); + regval |= I2C_CTL_STP; + outp(EZ80_I2C_CTL, regval); +} + +/**************************************************************************** + * Name: i2c_sendaddr + * + * Description: + * Send the 8- or 11-bit address for either a read or a write transaction. + * + * Input Parameters: + * priv - Device-specific state data + * readbit - 0 or I2C_READBIT + * + * Returned Value: + * 0: Success, IFLG is set and DATA can be sent or received. + + * Or <0: Negated error value. IFLG is cleared. + * + * -EIO: Irrecoverable (or unexpected) error occured + * -EAGAIN: And + * + ****************************************************************************/ + +static int i2c_sendaddr(struct ez80_i2cdev_s *priv, uint8_t readbit) +{ + uint8_t sr; + int ret = OK; + + /* Wait for the IFLG bit to transition to 1. At this point, we should + * have status == 8 meaning that the start bit was sent successfully. + */ + + sr = i2c_waitiflg(); +#ifdef CONFIG_DEBUG + if (sr != I2C_SR_MSTART) + { + /* This error should never occur */ + + dbg("Bad START status: %02x\n", sr); + i2c_clriflg(); + return -EIO; + } +#endif + + /* Now send the address */ + + if (!priv->addr10) + { + /* Load the I2C_DR with the 8-bit I2C slave address and clear the + * IFLG. Clearing the IFLAG will cause the address to be transferred. + */ + + outp(EZ80_I2C_DR, (uint8_t)I2C_ADDR8(priv->addr) | readbit); + i2c_clriflg(); + + /* And wait for the address transfer to complete */ + + sr = i2c_waitiflg(); + if (sr != I2C_SR_MADDRWRACK && sr != I2C_SR_MADDRWR) + { + dbg("Bad ADDR8 status: %02x\n", sr); + goto failure; + } + } + else + { + /* Load the I2C_DR with upper part of the 10->16-bit I2C slave address + * and clear the IFLG. Clearing the IFLAG will cause the address to + * be transferred. + */ + + outp(EZ80_I2C_DR, (uint8_t)I2C_ADDR10H(priv->addr) | readbit); + i2c_clriflg(); + + /* And wait for the address transfer to complete */ + + sr = i2c_waitiflg(); + if (sr != I2C_SR_MADDRWRACK && sr != I2C_SR_MADDRWR) + { + dbg("Bad ADDR10H status: %02x\n", sr); + goto failure; + } + + /* Now send the lower 8 bits of the 10-bit address */ + + outp(EZ80_I2C_DR, (uint8_t)I2C_ADDR10L(priv->addr)); + i2c_clriflg(); + + /* And wait for the address transfer to complete */ + + sr = i2c_waitiflg(); + if (sr != I2C_SR_MADDR2WRACK && sr != I2C_SR_MADDR2WR) + { + dbg("Bad ADDR10L status: %02x\n", sr); + goto failure; + } + } + + return OK; + + /* We don't attempt any fancy status-based error recovery */ + +failure: +#ifdef CONFIG_DEBUG + switch (sr) + { + case I2C_SR_ARBLOST1: /* Arbitration lost in address or data byte */ + case I2C_SR_ARBLOST2: /* Arbitration lost in address as master, slave address and Write bit received, ACK transmitted */ + case I2C_SR_ARBLOST3: /* Arbitration lost in address as master, General Call address received, ACK transmitted */ + case I2C_SR_ARBLOST4: /* Arbitration lost in address as master, slave address and Read bit received, ACK transmitted */ + dbg("Arbitration lost: %02x\n", sr); + i2c_clriflg(); + return -EAGAIN; + + default: + dbg("Unexpected status: %02x\n", sr); + i2c_clriflg(); + return -EIO; + } +#else + i2c_clriflg(); + return -EAGAIN; +#endif +} + +/**************************************************************************** + * Name: i2c_setfrequency + * + * Description: + * Set the I2C frequency. This frequency will be retained in the struct + * i2c_dev_s instance and will be used with all transfers. Required. + * + * Input Parameters: + * dev - Device-specific state data + * frequency - The I2C frequency requested + * + * Returned Value: + * Returns the actual frequency selected + * + ****************************************************************************/ + +static uint32_t i2c_setfrequency(FAR struct i2c_dev_s *dev, uint32_t frequency) +{ + FAR struct ez80_i2cdev_s *priv = (FAR struct ez80_i2cdev_s *)dev; + + /* Sanity Check */ + +#ifdef CONFIG_DEBUG + if (!dev) + { + dbg("Invalid inputs\n"); + return -EINVAL; + } +#endif + + /* Calculate and save the BRG (we won't apply it until the first transfer) */ + + priv->ccr = i2c_getccr(frequency); + return OK; +} + +/**************************************************************************** + * Name: i2c_setaddress + * + * Description: + * Set the I2C slave address. This frequency will be retained in the struct + * i2c_dev_s instance and will be used with all transfers. Required. + * + * Input Parameters: + * dev - Device-specific state data + * address - The I2C slave address + * nbits - The number of address bits provided (7 or 10) + * + * Returned Value: + * Returns the actual frequency selected + * + ****************************************************************************/ + +static int i2c_setaddress(FAR struct i2c_dev_s *dev, int addr, int nbits) +{ + FAR struct ez80_i2cdev_s *priv = (FAR struct ez80_i2cdev_s *)dev; + + /* Sanity Check */ + +#ifdef CONFIG_DEBUG + if (!dev || (unsigned)addr > 0x7f || (nbits != 7 && nbits != 10)) + { + dbg("Invalid inputs\n"); + return -EINVAL; + } +#endif + + /* Save the 7- or 10-bit address */ + + priv->addr = addr; + priv->addr10 = (nbits == 10); + return OK; +} + +/**************************************************************************** + * Name: i2c_write + * + * Description: + * Send a block of data on I2C using the previously selected I2C + * frequency and slave address. Each write operational will be an 'atomic' + * operation in the sense that any other I2C actions will be serialized + * and pend until this write completes. Required. + * + * Input Parameters: + * dev - Device-specific state data + * buffer - A pointer to the read-only buffer of data to be written to device + * buflen - The number of bytes to send from the buffer + * + * Returned Value: + * 0: success, <0: A negated errno + * + ****************************************************************************/ + +static int i2c_write(FAR struct i2c_dev_s *dev, const uint8_t *buffer, int buflen) +{ + FAR struct ez80_i2cdev_s *priv = (FAR struct ez80_i2cdev_s *)dev; + const uint8_t *ptr; + uint8_t sr; + int retry; + int count; + int ret; + +#ifdef CONFIG_DEBUG + if (!priv || !buffer || buflen < 1) + { + dbg("Invalid inputs\n"); + return -EINVAL; + } +#endif + + /* Get exclusive access */ + + i2c_semtake(); + + /* Set the frequency */ + + i2c_setccr(priv->ccr); + + /* Retry as necessary to send this whole message */ + + for (retry = 0; retry < 100; retry++) + { + /* Enter MASTER TRANSMIT mode by setting the STA bit in the I2C_CTL + * register to 1. The I2C then tests the I2C bus and transmits a START + * condition when the bus is free. + */ + + i2c_start(); + + /* When a START condition is transmitted, the IFLG bit is 1. Then we may + * send the I2C slave address. + */ + + ret = i2c_sendaddr(priv, 0); + if (ret < 0) + { + if (ret == -EAGAIN) + { + continue; + } + else + { + goto failure; + } + } + + /* Then send all of the bytes in the buffer */ + + ptr = buffer; + for (count = buflen; count; count--) + { + /* Load the I2C_DR with next data byte and clear the IFLG. Clearing + * the IFLAG will cause the data to be transferred. + */ + + outp(EZ80_I2C_DR, *ptr++); + i2c_clriflg(); + + /* And wait for the data transfer to complete */ + + sr = i2c_waitiflg(); + if (sr != I2C_SR_MDATAWRACK && sr != I2C_SR_MDATAWR) + { + dbg("Bad DATA status: %02x\n", sr); + i2c_clriflg(); + if (sr == I2C_SR_ARBLOST1) + { + /* Arbitration lost, break out of the inner loop and + * try sending the message again + */ + + break; + } + + /* Otherwise, it is fatal (shouldn't happen) */ + + ret = -EIO; + goto failure; + } + + /* Data byte was sent successfully. Was that the last byte? */ + + else if (count <= 1) + { + /* When all bytes are transmitted, the microcontroller must + * write a 1 to the STP bit in the I2C_CTL register. The + * I2C then transmits a STOP condition, clears the STP bit + * and returns to an idle state. + */ + + i2c_stop(); + + ret = OK; + goto success; + } + } + } + + /* If we get here, we timed out without successfully sending the message */ + + ret = -ETIMEDOUT; + +success: +failure: + i2c_semgive(); + return ret; +} + +/**************************************************************************** + * Name: i2c_read + * + * Description: + * Receive a block of data from I2C using the previously selected I2C + * frequency and slave address. Each read operational will be an 'atomic' + * operation in the sense that any other I2C actions will be serialized + * and pend until this read completes. Required. + * + * Input Parameters: + * dev - Device-specific state data + * buffer - A pointer to a buffer of data to receive the data from the device + * buflen - The requested number of bytes to be read + * + * Returned Value: + * 0: success, <0: A negated errno + * + ****************************************************************************/ + +static int i2c_read(FAR struct i2c_dev_s *dev, uint8_t *buffer, int buflen) +{ + FAR struct ez80_i2cdev_s *priv = (FAR struct ez80_i2cdev_s *)dev; + uint8_t *ptr; + uint8_t regval; + int retry; + int count; + int ret; + +#ifdef CONFIG_DEBUG + if (!priv || !buffer || buflen < 1) + { + dbg("Invalid inputs\n"); + return -EINVAL; + } +#endif + + /* Get exclusive access */ + + i2c_semtake(); + + /* Set the frequency */ + + i2c_setccr(priv->ccr); + + /* Retry as necessary to receive the whole message */ + + for (retry = 0; retry < 100; retry++) + { + /* Enter MASTER TRANSMIT mode by setting the STA bit in the I2C_CTL + * register to 1. The I2C then tests the I2C bus and transmits a START + * condition when the bus is free. + */ + + i2c_start(); + + /* When a START condition is transmitted, the IFLG bit is 1. Then we may + * send the I2C slave address. + */ + + ret = i2c_sendaddr(priv, 0); + if (ret < 0) + { + if (ret == -EAGAIN) + { + continue; + } + else + { + goto failure; + } + } + + /* Now loop to receive each data byte */ + + ptr = buffer; + for (count = buflen; count; count--) + { + /* Is this the last byte? If so, we must NACK it */ + + regval = inp(EZ80_I2C_CTL); + if (count <= 1) + { + /* If the AAK bit is cleared to 0 during a transfer, the I2C + * transmits a NACK bit after the next byte is received. + */ + + regval &= ~I2C_CTL_AAK; + } + else + { + /* If the AAK bit in the I2C_CTL register is set to 1 then an + * ACK bit is transmitted and the IFLG bit is set after each + * byte is received. + */ + + regval |= I2C_CTL_AAK; + } + outp(EZ80_I2C_CTL, regval); + + /* Wait for IFLG to be set meaning that incoming data is + * available in the I2C_DR registers. + */ + + regval = i2c_waitiflg(); + + /* Data byte received in MASTER mode, ACK transmitted */ + + if (regval == I2C_SR_MDATARDACK) + { + /* Since we just ACKed the incoming byte, it must NOT be the last */ + + DEBUGASSERT(count > 1); + + /* Receive the data and clear the IFLGS */ + + *ptr++ = inp(EZ80_I2C_DR); + i2c_clriflg(); + } + + /* Data byte received in MASTER mode, NACK transmitted */ + + else if (regval == I2C_SR_MDATARDNAK) + { + /* Since we just NACKed the incoming byte, it must be the last */ + + DEBUGASSERT(count <= 1); + + /* When all bytes are received and the NACK has been sent, then the + * microcontroller must write 1 to the STP bit in the I2C_CTL + * register. The I2C then transmits a STOP condition, clears + * the STP bit and returns to an idle state. + */ + + i2c_stop(); + i2c_clriflg(); + + ret = OK; + goto success; + } + + /* Arbitration lost in address or data byte */ + + else if (regval == I2C_SR_ARBLOST1) + { + /* Clear the IFLG and break out of the inner loop. + * this will cause the whole transfer to start over + */ + + dbg("Arbitration lost: %02x\n", regval); + i2c_clriflg(); + break; + } + + /* Unexpected status response */ + + else + { + dbg("Unexpected status: %02x\n", regval); + i2c_clriflg(); + ret = -EIO; + goto failure; + } + } + } + ret = -ETIMEDOUT; + +success: +failure: + i2c_semgive(); + return ret; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_i2cinitialize + * + * Description: + * Initialize the selected I2C port. And return a unique instance of struct + * struct i2c_dev_s. This function may be called to obtain multiple + * instances of the interface, each of which may be set up with a + * different frequency and slave address. + * + * Input Parameter: + * Port number (for hardware that has mutiple I2C interfaces) + * + * Returned Value: + * Valid I2C device structre reference on succcess; a NULL on failure + * + ****************************************************************************/ + +FAR struct i2c_dev_s *up_i2cinitialize(int port) +{ + FAR struct ez80_i2cdev_s *i2c; + uint16_t ccr; + uint8_t regval; + + if (!g_initialized) + { + /* Set up some initial BRG value */ + + ccr = i2c_getccr(100*1000); + i2c_setccr(ccr); + + /* No GPIO setup is required -- I2C pints, SCL/SDA are not multiplexed */ + + /* This semaphore enforces serialized access for I2C transfers */ + + sem_init(&g_i2csem, 0, 1); + + /* Enable I2C -- but not interrupts */ + + regval = inp(EZ80_I2C_CTL); + regval |= I2C_CTL_ENAB; + outp(EZ80_I2C_CTL, regval); + } + + /* Now, allocate an I2C instance for this caller */ + + i2c = (FAR struct ez80_i2cdev_s *)malloc(sizeof(FAR struct ez80_i2cdev_s)); + if (i2c) + { + /* Initialize the allocated instance */ + + i2c->ops = &g_ops; + i2c->ccr = g_currccr; + } + return (FAR struct i2c_dev_s *)i2c; +} diff --git a/nuttx/arch/z80/src/ez80/ez80_initialstate.c b/nuttx/arch/z80/src/ez80/ez80_initialstate.c index 68ff517a9..5b6e5fb4b 100644 --- a/nuttx/arch/z80/src/ez80/ez80_initialstate.c +++ b/nuttx/arch/z80/src/ez80/ez80_initialstate.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/ez80/ez80_initialstate.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <string.h> #include <nuttx/arch.h> @@ -85,7 +85,7 @@ void up_initial_state(_TCB *tcb) memset(xcp, 0, sizeof(struct xcptcontext)); #ifndef CONFIG_SUPPRESS_INTERRUPTS - ((ubyte*)xcp->regs)[XCPT_IF_OFFSET] = EZ80_PV_FLAG; /* Parity/Overflow flag will enable interrupts */ + ((uint8_t*)xcp->regs)[XCPT_IF_OFFSET] = EZ80_PV_FLAG; /* Parity/Overflow flag will enable interrupts */ #endif xcp->regs[XCPT_SP] = (chipreg_t)tcb->adj_stack_ptr; xcp->regs[XCPT_PC] = (chipreg_t)tcb->start; diff --git a/nuttx/arch/z80/src/ez80/ez80_io.asm b/nuttx/arch/z80/src/ez80/ez80_io.asm index 86af3b3e8..9c5d28e7e 100644 --- a/nuttx/arch/z80/src/ez80/ez80_io.asm +++ b/nuttx/arch/z80/src/ez80/ez80_io.asm @@ -1,7 +1,7 @@ ;************************************************************************** ; arch/z80/src/ze80/ez80_io.c ; -; Copyright (C) 2008 Gregory Nutt. All rights reserved. +; Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. ; Author: Gregory Nutt <spudmonkey@racsa.co.cr> ; ; Redistribution and use in source and binary forms, with or without @@ -58,7 +58,7 @@ .assume ADL=1 ;************************************************************************** -; Name: void outp(uint16 p, ubyte c) +; Name: void outp(uint16_t p, uint8_t c) ; ; Description: ; Output byte c on port p @@ -108,7 +108,7 @@ _outp: ret ;************************************************************************** -; Name: ubyte inp(uint16 p) +; Name: uint8_t inp(uint16_t p) ; ; Description: ; Input byte from port p diff --git a/nuttx/arch/z80/src/ez80/ez80_irq.c b/nuttx/arch/z80/src/ez80/ez80_irq.c index 6e0fa71c6..38a51c9c4 100644 --- a/nuttx/arch/z80/src/ez80/ez80_irq.c +++ b/nuttx/arch/z80/src/ez80/ez80_irq.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/ez80/ez80_irq.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <nuttx/arch.h> #include <nuttx/irq.h> diff --git a/nuttx/arch/z80/src/ez80/ez80_lowuart.c b/nuttx/arch/z80/src/ez80/ez80_lowuart.c index a89c8089b..5bcbaa043 100644 --- a/nuttx/arch/z80/src/ez80/ez80_lowuart.c +++ b/nuttx/arch/z80/src/ez80/ez80_lowuart.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/ez80/ez80_loweruart.c * - * Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <string.h> #include <arch/io.h> @@ -140,8 +140,8 @@ #if defined(HAVE_SERIALCONSOLE) && !defined(CONFIG_SUPPRESS_UART_CONFIG) static void ez80_setbaud(void) { - uint32 brg_divisor; - ubyte lctl; + uint32_t brg_divisor; + uint8_t lctl; /* The resulting BAUD and depends on the system clock frequency and the * BRG divisor as follows: @@ -163,8 +163,8 @@ static void ez80_setbaud(void) lctl |= EZ80_UARTLCTL_DLAB; ez80_outp(EZ80_UART_LCTL, lctl); - ez80_outp(EZ80_UART_BRGL, (ubyte)(brg_divisor & 0xff)); - ez80_outp(EZ80_UART_BRGH, (ubyte)(brg_divisor >> 8)); + ez80_outp(EZ80_UART_BRGL, (uint8_t)(brg_divisor & 0xff)); + ez80_outp(EZ80_UART_BRGH, (uint8_t)(brg_divisor >> 8)); lctl &= ~EZ80_UARTLCTL_DLAB; ez80_outp(EZ80_UART_LCTL, lctl); @@ -182,7 +182,7 @@ static void ez80_setbaud(void) void up_lowuartinit(void) { #ifdef HAVE_SERIAL - ubyte regval; + uint8_t regval; /* Configure pins for usage of UARTs (whether or not we have a console) */ diff --git a/nuttx/arch/z80/src/ez80/ez80_registerdump.c b/nuttx/arch/z80/src/ez80/ez80_registerdump.c index 31a69679c..d1aa3726b 100644 --- a/nuttx/arch/z80/src/ez80/ez80_registerdump.c +++ b/nuttx/arch/z80/src/ez80/ez80_registerdump.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/ez80/ez80_registerdump.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <debug.h> #include <nuttx/irq.h> diff --git a/nuttx/arch/z80/src/ez80/ez80_schedulesigaction.c b/nuttx/arch/z80/src/ez80/ez80_schedulesigaction.c index 0ca61a6ff..e95cebc69 100644 --- a/nuttx/arch/z80/src/ez80/ez80_schedulesigaction.c +++ b/nuttx/arch/z80/src/ez80/ez80_schedulesigaction.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/ez80/ez80_schedulesigaction.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <sched.h> #include <debug.h> @@ -123,7 +123,7 @@ static void ez80_sigsetup(FAR _TCB *tcb, sig_deliver_t sigdeliver, FAR chipreg_t void up_schedule_sigaction(FAR _TCB *tcb, sig_deliver_t sigdeliver) { - sdbg("tcb=0x%p sigdeliver=0x%04x\n", tcb, (uint16)sigdeliver); + sdbg("tcb=0x%p sigdeliver=0x%04x\n", tcb, (uint16_t))sigdeliver); /* Refuse to handle nested signal actions */ diff --git a/nuttx/arch/z80/src/ez80/ez80_serial.c b/nuttx/arch/z80/src/ez80/ez80_serial.c index e8e0ec0a0..e5fefbd87 100644 --- a/nuttx/arch/z80/src/ez80/ez80_serial.c +++ b/nuttx/arch/z80/src/ez80/ez80_serial.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/ez08/ez80_serial.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -40,6 +40,8 @@ #include <nuttx/config.h> #include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> #include <unistd.h> #include <semaphore.h> #include <string.h> @@ -68,31 +70,31 @@ struct ez80_dev_s { - uint16 uartbase; /* Base address of UART registers */ - unsigned int baud; /* Configured baud */ - ubyte irq; /* IRQ associated with this UART */ - ubyte parity; /* 0=none, 1=odd, 2=even */ - ubyte bits; /* Number of bits (7 or 8) */ - boolean stopbits2; /* TRUE: Configure with 2 (vs 1) */ + uint16_t uartbase; /* Base address of UART registers */ + unsigned int baud; /* Configured baud */ + uint8_t irq; /* IRQ associated with this UART */ + uint8_t parity; /* 0=none, 1=odd, 2=even */ + uint8_t bits; /* Number of bits (7 or 8) */ + bool stopbits2; /* true: Configure with 2 (vs 1) */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ -static int ez80_setup(struct uart_dev_s *dev); -static void ez80_shutdown(struct uart_dev_s *dev); -static int ez80_attach(struct uart_dev_s *dev); -static void ez80_detach(struct uart_dev_s *dev); -static int ez80_interrrupt(int irq, void *context); -static int ez80_ioctl(struct file *filep, int cmd, unsigned long arg); -static int ez80_receive(struct uart_dev_s *dev, unsigned int *status); -static void ez80_rxint(struct uart_dev_s *dev, boolean enable); -static boolean ez80_rxavailable(struct uart_dev_s *dev); -static void ez80_send(struct uart_dev_s *dev, int ch); -static void ez80_txint(struct uart_dev_s *dev, boolean enable); -static boolean ez80_txready(struct uart_dev_s *dev); -static boolean ez80_txempty(struct uart_dev_s *dev); +static int ez80_setup(struct uart_dev_s *dev); +static void ez80_shutdown(struct uart_dev_s *dev); +static int ez80_attach(struct uart_dev_s *dev); +static void ez80_detach(struct uart_dev_s *dev); +static int ez80_interrrupt(int irq, void *context); +static int ez80_ioctl(struct file *filep, int cmd, unsigned long arg); +static int ez80_receive(struct uart_dev_s *dev, unsigned int *status); +static void ez80_rxint(struct uart_dev_s *dev, bool enable); +static bool ez80_rxavailable(struct uart_dev_s *dev); +static void ez80_send(struct uart_dev_s *dev, int ch); +static void ez80_txint(struct uart_dev_s *dev, bool enable); +static bool ez80_txready(struct uart_dev_s *dev); +static bool ez80_txempty(struct uart_dev_s *dev); /**************************************************************************** * Private Variables @@ -141,12 +143,12 @@ static struct ez80_dev_s g_uart0priv = static uart_dev_t g_uart0port = { 0, /* open_count */ - FALSE, /* xmitwaiting */ - FALSE, /* recvwaiting */ + false, /* xmitwaiting */ + false, /* recvwaiting */ #ifdef CONFIG_UART0_SERIAL_CONSOLE - TRUE, /* isconsole */ + true, /* isconsole */ #else - FALSE, /* isconsole */ + false, /* isconsole */ #endif { 0 }, /* closesem */ { 0 }, /* xmitsem */ @@ -186,12 +188,12 @@ static struct ez80_dev_s g_uart1priv = static uart_dev_t g_uart1port = { 0, /* open_count */ - FALSE, /* xmitwaiting */ - FALSE, /* recvwaiting */ + false, /* xmitwaiting */ + false, /* recvwaiting */ #ifdef CONFIG_UART1_SERIAL_CONSOLE - TRUE, /* isconsole */ + true, /* isconsole */ #else - FALSE, /* isconsole */ + false, /* isconsole */ #endif { 0 }, /* closesem */ { 0 }, /* xmitsem */ @@ -246,7 +248,7 @@ static uart_dev_t g_uart1port = * Name: ez80_serialin ****************************************************************************/ -static inline ubyte ez80_serialin(struct ez80_dev_s *priv, ubyte offset) +static inline uint8_t ez80_serialin(struct ez80_dev_s *priv, uint8_t offset) { return inp(priv->uartbase + offset); } @@ -255,7 +257,8 @@ static inline ubyte ez80_serialin(struct ez80_dev_s *priv, ubyte offset) * Name: ez80_serialout ****************************************************************************/ -static inline void ez80_serialout(struct ez80_dev_s *priv, ubyte offset, ubyte value) +static inline void ez80_serialout(struct ez80_dev_s *priv, uint8_t offset, + uint8_t value) { outp(priv->uartbase + offset, value); } @@ -266,7 +269,7 @@ static inline void ez80_serialout(struct ez80_dev_s *priv, ubyte offset, ubyte v static inline void ez80_disableuartint(struct ez80_dev_s *priv) { - ubyte ier = ez80_serialin(priv, EZ80_UART_IER); + uint8_t ier = ez80_serialin(priv, EZ80_UART_IER); ier &= ~EZ80_UARTEIR_INTMASK; ez80_serialout(priv, EZ80_UART_IER, ier); } @@ -275,9 +278,9 @@ static inline void ez80_disableuartint(struct ez80_dev_s *priv) * Name: ez80_restoreuartint ****************************************************************************/ -static inline void ez80_restoreuartint(struct ez80_dev_s *priv, ubyte bits) +static inline void ez80_restoreuartint(struct ez80_dev_s *priv, uint8_t bits) { - ubyte ier = ez80_serialin(priv, EZ80_UART_IER); + uint8_t ier = ez80_serialin(priv, EZ80_UART_IER); ier |= bits & (EZ80_UARTEIR_TIE|EZ80_UARTEIR_RIE); ez80_serialout(priv, EZ80_UART_IER, ier); } @@ -303,10 +306,10 @@ static inline void ez80_waittxready(struct ez80_dev_s *priv) * Name: ez80_setbaud ****************************************************************************/ -static inline void ez80_setbaud(struct ez80_dev_s *priv, uint24 baud) +static inline void ez80_setbaud(struct ez80_dev_s *priv, uint24_t baud) { - uint32 brg_divisor; - ubyte lctl; + uint32_t brg_divisor; + uint8_t lctl; /* The resulting BAUD and depends on the system clock frequency and the * BRG divisor as follows: @@ -326,8 +329,8 @@ static inline void ez80_setbaud(struct ez80_dev_s *priv, uint24 baud) lctl |= EZ80_UARTLCTL_DLAB; ez80_serialout(priv, EZ80_UART_LCTL, lctl); - ez80_serialout(priv, EZ80_UART_BRGL, (ubyte)(brg_divisor & 0xff)); - ez80_serialout(priv, EZ80_UART_BRGH, (ubyte)(brg_divisor >> 8)); + ez80_serialout(priv, EZ80_UART_BRGL, (uint8_t)(brg_divisor & 0xff)); + ez80_serialout(priv, EZ80_UART_BRGH, (uint8_t)(brg_divisor >> 8)); lctl &= ~EZ80_UARTLCTL_DLAB; ez80_serialout(priv, EZ80_UART_LCTL, lctl); @@ -346,8 +349,8 @@ static int ez80_setup(struct uart_dev_s *dev) { #ifndef CONFIG_SUPPRESS_UART_CONFIG struct ez80_dev_s *priv = dev->priv; - ubyte reg; - ubyte cval; + uint8_t reg; + uint8_t cval; if (priv->bits == 7) { @@ -441,8 +444,8 @@ static int ez80_attach(struct uart_dev_s *dev) * * Description: * Detach UART interrupts. This method is called when the serial port is - * closed normally just before the shutdown method is called. The exception is - * the serial console which is never shutdown. + * closed normally just before the shutdown method is called. The exception + * is the serial console which is never shutdown. * ****************************************************************************/ @@ -470,7 +473,7 @@ static int ez80_interrrupt(int irq, void *context) { struct uart_dev_s *dev = NULL; struct ez80_dev_s *priv; - volatile uint32 cause; + volatile uint32_t cause; #ifndef CONFIG_UART0_DISABLE if (g_uart0priv.irq == irq) @@ -539,8 +542,8 @@ static int ez80_ioctl(struct file *filep, int cmd, unsigned long arg) static int ez80_receive(struct uart_dev_s *dev, unsigned int *status) { struct ez80_dev_s *priv = (struct ez80_dev_s*)dev->priv; - ubyte rbr = ez80_serialin(priv, EZ80_UART_RBR); - ubyte lsr = ez80_serialin(priv, EZ80_UART_LSR); + uint8_t rbr = ez80_serialin(priv, EZ80_UART_RBR); + uint8_t lsr = ez80_serialin(priv, EZ80_UART_LSR); *status = (unsigned int)lsr; return rbr; @@ -554,10 +557,10 @@ static int ez80_receive(struct uart_dev_s *dev, unsigned int *status) * ****************************************************************************/ -static void ez80_rxint(struct uart_dev_s *dev, boolean enable) +static void ez80_rxint(struct uart_dev_s *dev, bool enable) { struct ez80_dev_s *priv = (struct ez80_dev_s*)dev->priv; - ubyte ier = ez80_serialin(priv, EZ80_UART_IER); + uint8_t ier = ez80_serialin(priv, EZ80_UART_IER); if (enable) { @@ -577,11 +580,11 @@ static void ez80_rxint(struct uart_dev_s *dev, boolean enable) * Name: ez80_rxavailable * * Description: - * Return TRUE if the receive fifo is not empty + * Return true if the receive fifo is not empty * ****************************************************************************/ -static boolean ez80_rxavailable(struct uart_dev_s *dev) +static bool ez80_rxavailable(struct uart_dev_s *dev) { struct ez80_dev_s *priv = (struct ez80_dev_s*)dev->priv; return (ez80_serialin(priv, EZ80_UART_LSR) & EZ80_UARTLSR_DR) != 0; @@ -598,7 +601,7 @@ static boolean ez80_rxavailable(struct uart_dev_s *dev) static void ez80_send(struct uart_dev_s *dev, int ch) { struct ez80_dev_s *priv = (struct ez80_dev_s*)dev->priv; - ez80_serialout(priv, EZ80_UART_THR, (ubyte)ch); + ez80_serialout(priv, EZ80_UART_THR, (uint8_t)ch); } /**************************************************************************** @@ -609,10 +612,10 @@ static void ez80_send(struct uart_dev_s *dev, int ch) * ****************************************************************************/ -static void ez80_txint(struct uart_dev_s *dev, boolean enable) +static void ez80_txint(struct uart_dev_s *dev, bool enable) { struct ez80_dev_s *priv = (struct ez80_dev_s*)dev->priv; - ubyte ier = ez80_serialin(priv, EZ80_UART_IER); + uint8_t ier = ez80_serialin(priv, EZ80_UART_IER); if (enable) { @@ -632,11 +635,11 @@ static void ez80_txint(struct uart_dev_s *dev, boolean enable) * Name: ez80_txready * * Description: - * Return TRUE if the tranmsit fifo is not full + * Return true if the tranmsit fifo is not full * ****************************************************************************/ -static boolean ez80_txready(struct uart_dev_s *dev) +static bool ez80_txready(struct uart_dev_s *dev) { struct ez80_dev_s *priv = (struct ez80_dev_s*)dev->priv; return (ez80_serialin(priv, EZ80_UART_LSR) & EZ80_UARTLSR_THRE) != 0; @@ -646,11 +649,11 @@ static boolean ez80_txready(struct uart_dev_s *dev) * Name: ez80_txempty * * Description: - * Return TRUE if the transmit fifo is empty + * Return true if the transmit fifo is empty * ****************************************************************************/ -static boolean ez80_txempty(struct uart_dev_s *dev) +static bool ez80_txempty(struct uart_dev_s *dev) { struct ez80_dev_s *priv = (struct ez80_dev_s*)dev->priv; return (ez80_serialin(priv, EZ80_UART_LSR) & EZ80_UARTLSR_TEMT) != 0; @@ -670,7 +673,7 @@ static boolean ez80_txempty(struct uart_dev_s *dev) void up_serialinit(void) { - ubyte regval; + uint8_t regval; /* Make sure that all UART interrupts are disabled */ @@ -716,7 +719,7 @@ void up_serialinit(void) /* If there is a console, then configure the console now */ #ifdef CONSOLE_DEV - CONSOLE_DEV.isconsole = TRUE; + CONSOLE_DEV.isconsole = true; ez80_setup(&CONSOLE_DEV); #endif @@ -744,7 +747,7 @@ int up_putc(int ch) { #ifdef CONSOLE_DEV struct ez80_dev_s *priv = (struct ez80_dev_s*)CONSOLE_DEV.priv; - ubyte ier = ez80_serialin(priv, EZ80_UART_IER); + uint8_t ier = ez80_serialin(priv, EZ80_UART_IER); ez80_disableuartint(priv); @@ -761,7 +764,7 @@ int up_putc(int ch) /* Output the character */ ez80_waittxready(priv); - ez80_serialout(priv, EZ80_UART_THR, (ubyte)ch); + ez80_serialout(priv, EZ80_UART_THR, (uint8_t)ch); /* Wait for the character to be sent before re-enabling interrupts */ diff --git a/nuttx/arch/z80/src/ez80/ez80_sigdeliver.c b/nuttx/arch/z80/src/ez80/ez80_sigdeliver.c index 3f6b6ed1a..90fdf4c6b 100644 --- a/nuttx/arch/z80/src/ez80/ez80_sigdeliver.c +++ b/nuttx/arch/z80/src/ez80/ez80_sigdeliver.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/ez80/ez80_sigdeliver.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <sched.h> #include <debug.h> diff --git a/nuttx/arch/z80/src/ez80/ez80_spi.c b/nuttx/arch/z80/src/ez80/ez80_spi.c index d051f074f..6c5f7f2aa 100755 --- a/nuttx/arch/z80/src/ez80/ez80_spi.c +++ b/nuttx/arch/z80/src/ez80/ez80_spi.c @@ -38,7 +38,9 @@ ****************************************************************************/ #include <nuttx/config.h> -#include <nuttx/spi.h> + +#include <sys/types.h> +#include <stdint.h> #include <arch/board/board.h> #include <nuttx/arch.h> @@ -65,11 +67,14 @@ * Private Function Prototypes ****************************************************************************/ -static uint32 spi_setfrequency(FAR struct spi_dev_s *dev, uint32 frequency); +static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, + uint32_t frequency); static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode); -static uint16 spi_send(FAR struct spi_dev_s *dev, uint16 wd); -static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const ubyte *buffer, size_t buflen); -static void spi_recvblock(FAR struct spi_dev_s *dev, FAR ubyte *buffer, size_t buflen); +static uint16_t spi_send(FAR struct spi_dev_s *dev, uint16_t wd); +static void spi_sndblock(FAR struct spi_dev_s *dev, + FAR const uint8_t *buffer, size_t buflen); +static void spi_recvblock(FAR struct spi_dev_s *dev, FAR uint8_t *buffer, + size_t buflen); /**************************************************************************** * Private Data @@ -119,7 +124,7 @@ static struct spi_dev_s g_spidev = { &g_spiops }; * ****************************************************************************/ -static uint32 spi_setfrequency(FAR struct spi_dev_s *dev, uint32 frequency) +static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency) { /* We want select divisor to provide the highest frequency (SPIR) that does NOT * exceed the requested frequency.: @@ -131,7 +136,7 @@ static uint32 spi_setfrequency(FAR struct spi_dev_s *dev, uint32 frequency) * BRG >= System Clock Frequency / (2 * SPIR) */ - uint32 brg = ((EZ80_SYS_CLK_FREQ+1)/2 + frequency - 1) / frequency; + uint32_t brg = ((EZ80_SYS_CLK_FREQ+1)/2 + frequency - 1) / frequency; /* "When configured as a Master, the 16-bit divisor value must be between * 0003h and FFFFh, inclusive. When configured as a Slave, the 16-bit @@ -170,8 +175,8 @@ static uint32 spi_setfrequency(FAR struct spi_dev_s *dev, uint32 frequency) static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode) { - ubyte modebits; - ubyte regval; + uint8_t modebits; + uint8_t regval; /* Select the CTL register bits based on the selected mode */ @@ -220,9 +225,9 @@ static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode) * ****************************************************************************/ -static ubyte spi_waitspif(void) +static uint8_t spi_waitspif(void) { - ubyte status; + uint8_t status; /* Wait for the device to be ready to accept another byte (or for an error * to be reported @@ -250,9 +255,9 @@ static ubyte spi_waitspif(void) * ****************************************************************************/ -static ubyte spi_transfer(ubyte ch) +static uint8_t spi_transfer(uint8_t ch) { - ubyte status; + uint8_t status; /* Send the byte, repeating if some error occurs */ @@ -286,9 +291,9 @@ static ubyte spi_transfer(ubyte ch) * ****************************************************************************/ -static uint16 spi_send(FAR struct spi_dev_s *dev, uint16 wd) +static uint16_t spi_send(FAR struct spi_dev_s *dev, uint16_t wd) { - return spi_transfer((ubyte)wd); + return spi_transfer((uint8_t)wd); } /************************************************************************* @@ -303,17 +308,19 @@ static uint16 spi_send(FAR struct spi_dev_s *dev, uint16 wd) * buflen - the length of data to send from the buffer in number of words. * The wordsize is determined by the number of bits-per-word * selected for the SPI interface. If nbits <= 8, the data is - * packed into ubytes; if nbits >8, the data is packed into uint16's + * packed into uint8_t's; if nbits >8, the data is packed into + * uint16_t's * * Returned Value: * None * ****************************************************************************/ -static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const void *buffer, size_t buflen) +static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const void *buffer, + size_t buflen) { - FAR const ubyte *ptr = (FAR const ubyte*)buffer; - ubyte response; + FAR const uint8_t *ptr = (FAR const uint8_t*)buffer; + uint8_t response; /* Loop while thre are bytes remaining to be sent */ @@ -335,7 +342,8 @@ static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const void *buffer, size * buflen - the length of data that can be received in the buffer in number * of words. The wordsize is determined by the number of bits-per-word * selected for the SPI interface. If nbits <= 8, the data is - * packed into ubytes; if nbits >8, the data is packed into uint16's + * packed into uint8_t's; if nbits >8, the data is packed into + * uint16_t's * * Returned Value: * None @@ -344,8 +352,8 @@ static void spi_sndblock(FAR struct spi_dev_s *dev, FAR const void *buffer, size static void spi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t buflen) { - FAR ubyte *ptr = (FAR ubyte*)buffer; - ubyte response; + FAR uint8_t *ptr = (FAR uint8_t*)buffer; + uint8_t response; /* Loop while thre are bytes remaining to be sent */ @@ -383,7 +391,7 @@ static void spi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t bu FAR struct spi_dev_s *up_spiinitialize(int port) { - ubyte regval; + uint8_t regval; /* Only the SPI1 interface is supported */ diff --git a/nuttx/arch/z80/src/ez80/ez80_timerisr.c b/nuttx/arch/z80/src/ez80/ez80_timerisr.c index 51eb90ebe..b047a1331 100644 --- a/nuttx/arch/z80/src/ez80/ez80_timerisr.c +++ b/nuttx/arch/z80/src/ez80/ez80_timerisr.c @@ -1,7 +1,7 @@ /*************************************************************************** * arch/z80/src/ez80/ez80_timerisr.c * - * Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <debug.h> #include <arch/io.h> @@ -76,7 +76,7 @@ int up_timerisr(int irq, chipreg_t *regs) { - volatile ubyte reg; + volatile uint8_t reg; /* Read the appropropriate timer0 registr to clear the interrupt */ @@ -112,8 +112,8 @@ int up_timerisr(int irq, chipreg_t *regs) void up_timerinit(void) { - uint16 reload; - ubyte reg; + uint16_t) reload; + uint8_t reg; /* Disable the timer */ @@ -142,9 +142,9 @@ void up_timerinit(void) * NOTE: The system clock frequency value is defined in the board.h file */ - reload = (uint16)(ez80_systemclock / 1600); - outp(EZ80_TMR0_RRH, (ubyte)(reload >> 8)); - outp(EZ80_TMR0_RRL, (ubyte)(reload)); + reload = (uint16_t))(ez80_systemclock / 1600); + outp(EZ80_TMR0_RRH, (uint8_t)(reload >> 8)); + outp(EZ80_TMR0_RRL, (uint8_t)(reload)); /* Clear any pending timer interrupts */ diff --git a/nuttx/arch/z80/src/ez80/ez80f91_emac.h b/nuttx/arch/z80/src/ez80/ez80f91_emac.h index eee5a4571..61f2e7f5a 100644 --- a/nuttx/arch/z80/src/ez80/ez80f91_emac.h +++ b/nuttx/arch/z80/src/ez80/ez80f91_emac.h @@ -2,7 +2,7 @@ * arch/z80/src/ez80/ez80f91_emac.h * arch/z80/src/chip/ez80f91_emac.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -41,6 +41,10 @@ * Included Files ************************************************************************************/ +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif + /************************************************************************************ * Definitions ************************************************************************************/ @@ -249,11 +253,11 @@ #ifndef __ASSEMBLY__ struct ez80emac_desc_s { - uint24 np; /* Pointer to the start of the next packet */ - uint16 pktsize; /* Number of bytes in the packet, including the 4 CRC - * bytes, but excluding the 7 descriptor table bytes. */ - uint16 stat; /* Status of the packet. Differs for TX and RX packets - * (see EMAC_RX/TXDESC_* definitions) */ + uint24_t np; /* Pointer to the start of the next packet */ + uint16_t pktsize; /* Number of bytes in the packet, including the 4 CRC + * bytes, but excluding the 7 descriptor table bytes. */ + uint16_t stat; /* Status of the packet. Differs for TX and RX packets + * (see EMAC_RX/TXDESC_* definitions) */ }; #endif diff --git a/nuttx/arch/z80/src/ez80/ez80f91_i2c.h b/nuttx/arch/z80/src/ez80/ez80f91_i2c.h index b77e56ae4..20ffb513a 100644 --- a/nuttx/arch/z80/src/ez80/ez80f91_i2c.h +++ b/nuttx/arch/z80/src/ez80/ez80f91_i2c.h @@ -42,7 +42,6 @@ ************************************************************************************/ #include <nuttx/config.h> -#include <sys/types.h> /************************************************************************************ * Definitions diff --git a/nuttx/arch/z80/src/ez80/ez80f91_spi.h b/nuttx/arch/z80/src/ez80/ez80f91_spi.h index 5a0305b68..9e697cbbe 100644 --- a/nuttx/arch/z80/src/ez80/ez80f91_spi.h +++ b/nuttx/arch/z80/src/ez80/ez80f91_spi.h @@ -42,7 +42,8 @@ ************************************************************************************/ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> #include <nuttx/spi.h> /************************************************************************************ @@ -113,8 +114,8 @@ extern "C" { * for example, will bind the SPI driver to the SPI MMC/SD driver). */ -EXTERN void ez80_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, boolean selected); -EXTERN ubyte ez80_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid); +EXTERN void ez80_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected); +EXTERN uint8_t ez80_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid); #undef EXTERN #ifdef __cplusplus diff --git a/nuttx/arch/z80/src/ez80/switch.h b/nuttx/arch/z80/src/ez80/switch.h index ef78d8420..b1d71669b 100644 --- a/nuttx/arch/z80/src/ez80/switch.h +++ b/nuttx/arch/z80/src/ez80/switch.h @@ -2,7 +2,7 @@ * arch/z80/src/ez80/switch.h * arch/z80/src/chip/switch.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -41,7 +41,6 @@ * Included Files ************************************************************************************/ -#include <sys/types.h> #ifndef __ASSEMBLY__ # include <nuttx/sched.h> # include <nuttx/arch.h> @@ -62,7 +61,7 @@ #define INIT_IRQCONTEXT() current_regs = NULL -/* IN_INTERRUPT returns TRUE if the system is current operating in the interrupt +/* IN_INTERRUPT returns true if the system is current operating in the interrupt * context. IN_INTERRUPT is the inline equivalent of up_interrupt_context(). */ diff --git a/nuttx/arch/z80/src/ez80/up_mem.h b/nuttx/arch/z80/src/ez80/up_mem.h index 6031d3985..724facbd3 100644 --- a/nuttx/arch/z80/src/ez80/up_mem.h +++ b/nuttx/arch/z80/src/ez80/up_mem.h @@ -2,7 +2,7 @@ * arch/z80/src/ez80/up_mem.h * arch/z80/src/chip/up_mem.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -41,6 +41,8 @@ * Included Files ************************************************************************************/ +#include <stdint.h> + /************************************************************************************ * Definitions ************************************************************************************/ @@ -57,12 +59,12 @@ #ifndef CONFIG_HEAP1_BASE extern unsigned long _heapbot; -# define CONFIG_HEAP1_BASE ((uint24)&_heapbot) +# define CONFIG_HEAP1_BASE ((uint24_t)&_heapbot) #endif #ifndef CONFIG_HEAP1_END extern unsigned long _stack; -# define CONFIG_HEAP1_END (((uint24)&_stack) - CONFIG_IDLETHREAD_STACKSIZE) +# define CONFIG_HEAP1_END (((uint24_t)&_stack) - CONFIG_IDLETHREAD_STACKSIZE) #endif /************************************************************************************ diff --git a/nuttx/arch/z80/src/z8/chip.h b/nuttx/arch/z80/src/z8/chip.h index 702edd5fe..7635c0407 100644 --- a/nuttx/arch/z80/src/z8/chip.h +++ b/nuttx/arch/z80/src/z8/chip.h @@ -41,6 +41,10 @@ * Included Files ************************************************************************************/ +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif + /************************************************************************************ * Definitions ************************************************************************************/ @@ -118,11 +122,11 @@ /* UART0/1 Base Register Addresses **************************************************/ #ifdef EZ8_UART0 -# define Z8_UART0_BASE ((ubyte volatile far*)0xf40) +# define Z8_UART0_BASE ((uint8_t volatile far*)0xf40) #endif #ifdef EZ8_UART1 -# define Z8_UART1_BASE ((ubyte volatile far*)0xf48) +# define Z8_UART1_BASE ((uint8_t volatile far*)0xf48) #endif /* UART0/1 Status 0 Register Bit Definitions ****************************************/ diff --git a/nuttx/arch/z80/src/z8/switch.h b/nuttx/arch/z80/src/z8/switch.h index 073eff57d..69e766cf6 100644 --- a/nuttx/arch/z80/src/z8/switch.h +++ b/nuttx/arch/z80/src/z8/switch.h @@ -2,7 +2,7 @@ * arch/z80/src/z8/switch.h * arch/z80/src/chip/switch.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -41,8 +41,8 @@ * Included Files ************************************************************************************/ -#include <sys/types.h> #ifndef __ASSEMBLY__ +# include <stdint.h> # include <nuttx/sched.h> # include <nuttx/arch.h> #endif @@ -63,7 +63,7 @@ #define Z8_IRQSTATE_SAVED 2 /* In interrupt, context has been saved */ /* The information saved on interrupt entry can be retained in a array of two - * uint16 values. These are + * uint24_t values. These are * * value[0] = RP (MS byte) and Flags (LS) byte * value[1] = PC @@ -105,7 +105,7 @@ g_z8irqstate.state = Z8_IRQSTATE_NONE; \ } while (0) -/* IN_INTERRUPT returns TRUE if the system is current operating in the interrupt +/* IN_INTERRUPT returns true if the system is current operating in the interrupt * context. IN_INTERRUPT is the inline equivalent of up_interrupt_context(). */ @@ -189,7 +189,7 @@ #ifndef __ASSEMBLY__ struct z8_irqstate_s { - ubyte state; /* See Z8_IRQSTATE_* definitions above */ + uint8_t state; /* See Z8_IRQSTATE_* definitions above */ chipreg_t *regs; /* Saved register information */ }; #endif diff --git a/nuttx/arch/z80/src/z8/up_mem.h b/nuttx/arch/z80/src/z8/up_mem.h index 822af3f71..877d043ff 100644 --- a/nuttx/arch/z80/src/z8/up_mem.h +++ b/nuttx/arch/z80/src/z8/up_mem.h @@ -2,7 +2,7 @@ * arch/z80/src/z8/up_mem.h * arch/z80/src/chip/up_mem.h * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -41,6 +41,8 @@ * Included Files ************************************************************************************/ +#include <stdint.h> + /************************************************************************************ * Definitions ************************************************************************************/ @@ -57,12 +59,12 @@ #ifndef CONFIG_HEAP1_BASE extern far unsigned long far_heapbot; -# define CONFIG_HEAP1_BASE ((uint16)&far_heapbot) +# define CONFIG_HEAP1_BASE ((uint16_t))&far_heapbot) #endif #ifndef CONFIG_HEAP1_END extern far unsigned long far_stacktop; -# define CONFIG_HEAP1_END (((uint16)&far_stacktop) - CONFIG_IDLETHREAD_STACKSIZE + 1) +# define CONFIG_HEAP1_END (((uint16_t))&far_stacktop) - CONFIG_IDLETHREAD_STACKSIZE + 1) #endif /************************************************************************************ diff --git a/nuttx/arch/z80/src/z8/z8_i2c.c b/nuttx/arch/z80/src/z8/z8_i2c.c index 1fb87d291..796f389ec 100755 --- a/nuttx/arch/z80/src/z8/z8_i2c.c +++ b/nuttx/arch/z80/src/z8/z8_i2c.c @@ -1,603 +1,604 @@ -/****************************************************************************
- * arch/z80/src/z8/z8_i2c.c
- *
- * Copyright(C) 2009 Gregory Nutt. All rights reserved.
- * Author: Gregory Nutt <spudmonkey@racsa.co.cr>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. Neither the name NuttX nor the names of its contributors may be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-
-#include <sys/types.h>
-#include <stdlib.h>
-#include <semaphore.h>
-#include <errno.h>
-#include <assert.h>
-#include <debug.h>
-
-#include <nuttx/i2c.h>
-#include <arch/board/board.h>
-
-#include <eZ8.h> /* eZ8 Register definitions */
-#include "chip.h" /* Register bit definitions */
-
-/****************************************************************************
- * Pre-processor Definitions
- ****************************************************************************/
-
-/****************************************************************************
- * Private Types
- ****************************************************************************/
-
-struct z8_i2cdev_s
-{
- const struct i2c_ops_s *ops; /* I2C vtable */
- uint16 brg; /* Baud rate generator value */
- ubyte addr; /* 8-bit address */
-};
-
-/****************************************************************************
- * Private Function Prototypes
- ****************************************************************************/
-
-/* Misc. Helpers */
-
-static void i2c_waittxempty(void);
-static void i2c_waitrxavail(void);
-static void i2c_setbrg(uint16 brg);
-static uint16 i2c_getbrg(uint32 frequency);
-
-/* I2C methods */
-
-static uint32 i2c_setfrequency(FAR struct i2c_dev_s *dev, uint32 frequency);
-static int i2c_setaddress(FAR struct i2c_dev_s *dev, int addr, int nbits);
-static int i2c_write(FAR struct i2c_dev_s *dev, const ubyte *buffer, int buflen);
-static int i2c_read(FAR struct i2c_dev_s *dev, ubyte *buffer, int buflen);
-
-/****************************************************************************
- * Public Function Prototypes
- ****************************************************************************/
-
-/* This function is normally prototyped int the ZiLOG header file sio.h */
-
-extern uint32 get_freq(void);
-
-/****************************************************************************
- * Private Data
- ****************************************************************************/
-
-static uint16 g_currbrg; /* Current BRG setting */
-static boolean g_initialized; /* TRUE:I2C has been initialized */
-static sem_t g_i2csem; /* Serialize I2C transfers */
-
-const struct i2c_ops_s g_ops =
-{
- i2c_setfrequency,
- i2c_setaddress,
- i2c_write,
- i2c_read,
-};
-
-/****************************************************************************
- * Private Functions
- ****************************************************************************/
-/****************************************************************************
- * Name: i2c_semtake/i2c_semgive
- *
- * Description:
- * Take/Give the I2C semaphore.
- *
- * Input Parameters:
- * None
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_semtake(void)
-{
- /* Take the I2C semaphore (perhaps waiting) */
-
- while (sem_wait(&g_i2csem) != 0)
- {
- /* The only case that an error should occr here is if
- * the wait was awakened by a signal.
- */
-
- ASSERT(errno == EINTR);
- }
-}
-
-#define i2c_semgive() sem_post(&g_i2csem)
-
-/****************************************************************************
- * Name: i2c_waittxempty
- *
- * Description:
- * Wait for the transmit data register to become empty.
- *
- * Input Parameters:
- * None
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_waittxempty(void)
-{
- int i;
- for (i = 0; i < 10000 && (I2CSTAT & I2C_STAT_TDRE) == 0; i++);
-}
-
-/****************************************************************************
- * Name: i2c_waitrxavail
- *
- * Description:
- * Wait until we have received a full byte of data.
- *
- * Input Parameters:
- * None
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_waitrxavail(void)
-{
- int i;
- for (i = 0; i <= 10000 && (I2CSTAT & (I2C_STAT_RDRF | I2C_STAT_NCKI)) == 0; i++);
-}
-
-/****************************************************************************
- * Name: i2c_setbrg
- *
- * Description:
- * Set the current BRG value for this transaction
- *
- * Input Parameters:
- * brg - BRG to set
- *
- * Returned Value:
- * None
- *
- ****************************************************************************/
-
-static void i2c_setbrg(uint16 brg)
-{
- if (g_currbrg != brg)
- {
- I2CBRH = (ubyte)(brg >> 8);
- I2CBRL = (ubyte)(brg & 0xff);
- g_currbrg = brg;
- }
-}
-
-/****************************************************************************
- * Name: i2c_getbrg
- *
- * Description:
- * Calculate the BRG value
- *
- * Input Parameters:
- * frequency - The I2C frequency requested
- *
- * Returned Value:
- * Returns the actual frequency selected
- *
- ****************************************************************************/
-
-static uint16 i2c_getbrg(uint32 frequency)
-{
- uint32 sysclock = get_freq();
-
- /* Max is 400 Kb/sec */
-
- if (frequency > 400*1000)
- {
- dbg("Invalid inputs\n");
- frequency = 400*1000;
- }
-
- /* BRG = sysclock / (4 * frequency) */
-
- return ((sysclock >> 2) + (frequency >> 1)) / frequency;
-}
-
-/****************************************************************************
- * Name: i2c_setfrequency
- *
- * Description:
- * Set the I2C frequency. This frequency will be retained in the struct
- * i2c_dev_s instance and will be used with all transfers. Required.
- *
- * Input Parameters:
- * dev - Device-specific state data
- * frequency - The I2C frequency requested
- *
- * Returned Value:
- * Returns the actual frequency selected
- *
- ****************************************************************************/
-
-static uint32 i2c_setfrequency(FAR struct i2c_dev_s *dev, uint32 frequency)
-{
- FAR struct z8_i2cdev_s *priv = (FAR struct z8_i2cdev_s *)dev;
-
- /* Sanity Check */
-
-#ifdef CONFIG_DEBUG
- if (!dev)
- {
- dbg("Invalid inputs\n");
- return -EINVAL;
- }
-#endif
-
- /* Calculate and save the BRG (we won't apply it until the first transfer) */
-
- priv->brg = i2c_getbrg(frequency);
- return OK;
-}
-
-/****************************************************************************
- * Name: i2c_setaddress
- *
- * Description:
- * Set the I2C slave address. This frequency will be retained in the struct
- * i2c_dev_s instance and will be used with all transfers. Required.
- *
- * Input Parameters:
- * dev - Device-specific state data
- * address - The I2C slave address
- * nbits - The number of address bits provided (7 or 10)
- *
- * Returned Value:
- * Returns the actual frequency selected
- *
- ****************************************************************************/
-
-static int i2c_setaddress(FAR struct i2c_dev_s *dev, int addr, int nbits)
-{
- FAR struct z8_i2cdev_s *priv = (FAR struct z8_i2cdev_s *)dev;
-
- /* Sanity Check */
-
-#ifdef CONFIG_DEBUG
- if (!dev || (unsigned)addr > 0x7f)
- {
- dbg("Invalid inputs\n");
- return -EINVAL;
- }
-#endif
-
- /* Save the 7-bit address (10-bit address not yet supported) */
-
- DEBUGASSERT(nbits == 7);
- priv->addr = (ubyte)addr;
- return OK;
-}
-
-/****************************************************************************
- * Name: i2c_write
- *
- * Description:
- * Send a block of data on I2C using the previously selected I2C
- * frequency and slave address. Each write operational will be an 'atomic'
- * operation in the sense that any other I2C actions will be serialized
- * and pend until this write completes. Required.
- *
- * Input Parameters:
- * dev - Device-specific state data
- * buffer - A pointer to the read-only buffer of data to be written to device
- * buflen - The number of bytes to send from the buffer
- *
- * Returned Value:
- * 0: success, <0: A negated errno
- *
- ****************************************************************************/
-
-static int i2c_write(FAR struct i2c_dev_s *dev, const ubyte *buffer, int buflen)
-{
- FAR struct z8_i2cdev_s *priv = (FAR struct z8_i2cdev_s *)dev;
- const ubyte *ptr;
- int retry;
- int count;
-
-#ifdef CONFIG_DEBUG
- if (!priv || !buffer || buflen < 1)
- {
- dbg("Invalid inputs\n");
- return -EINVAL;
- }
-#endif
-
- /* Get exclusive access */
-
- i2c_semtake();
-
- /* Set the frequency */
-
- i2c_setbrg(priv->brg);
-
- /* Retry as necessary to send this whole message */
-
- for (retry = 0; retry < 100; retry++)
- {
- /* Load the address into the transmit register. It is not sent
- * until the START bit is set.
- */
-
- I2CD = I2C_WRITEADDR8(priv->addr);
- I2CCTL |= I2C_CTL_START;
-
- /* Wait for the xmt buffer to become empty */
-
- i2c_waittxempty();
-
- /* Then send all of the bytes in the buffer */
-
- ptr = buffer;
- for (count = buflen; count; count--)
- {
- /* Send a byte of data and wait for it to be sent */
-
- I2CD = *ptr++;
- i2c_waittxempty();
-
- /* If this was the last byte, then send STOP immediately. This
- * is because the ACK will not be valid until the STOP clocks out
- * the last bit.. Hmmm. If this true then we will never be
- * able to send more than one data byte???
- */
-
- if (count == 1)
- {
- I2CCTL |= I2C_CTL_STOP;
-
- /* If this last byte was ACKed, then the whole buffer
- * was successfully sent and we can return success.
- */
-
- if ((I2CSTAT & I2C_STAT_ACK) != 0)
- {
- i2c_semgive();
- return OK;
- }
-
- /* If was was not ACKed, then this inner loop will
- * terminated (because count will decrement to zero
- * and the whole message will be resent
- */
- }
-
- /* Not the last byte... was this byte ACKed? */
-
- else if ((I2CSTAT & I2C_STAT_ACK) == 0)
- {
- /* No, flush the buffer and toggle the I2C on and off */
-
- I2CCTL |= I2C_CTL_FLUSH;
- I2CCTL &= ~I2C_CTL_IEN;
- I2CCTL |= I2C_CTL_IEN;
-
- /* Break out of the loop early and try again */
-
- break;
- }
- }
- }
- i2c_semgive();
- return -ETIMEDOUT;
-}
-
-/****************************************************************************
- * Name: i2c_read
- *
- * Description:
- * Receive a block of data from I2C using the previously selected I2C
- * frequency and slave address. Each read operational will be an 'atomic'
- * operation in the sense that any other I2C actions will be serialized
- * and pend until this read completes. Required.
- *
- * Input Parameters:
- * dev - Device-specific state data
- * buffer - A pointer to a buffer of data to receive the data from the device
- * buflen - The requested number of bytes to be read
- *
- * Returned Value:
- * 0: success, <0: A negated errno
- *
- ****************************************************************************/
-
-static int i2c_read(FAR struct i2c_dev_s *dev, ubyte *buffer, int buflen)
-{
- FAR struct z8_i2cdev_s *priv = (FAR struct z8_i2cdev_s *)dev;
- ubyte *ptr;
- int retry;
- int count;
-
-#ifdef CONFIG_DEBUG
- if (!priv || !buffer || buflen < 1)
- {
- dbg("Invalid inputs\n");
- return -EINVAL;
- }
-#endif
-
- /* Get exclusive access */
-
- i2c_semtake();
-
- /* Set the frequency */
-
- i2c_setbrg(priv->brg);
-
- /* Retry as necessary to receive the whole message */
-
- for (retry = 0; retry < 100; retry++)
- {
- /* Load the address into the transmit register. It is not sent
- * until the START bit is set.
- */
-
- I2CD = I2C_READADDR8(priv->addr);
-
- /* If we want only a single byte of data, then set the NACK
- * bit now.
- */
-
- I2CCTL |= I2C_CTL_NAK;
-
- /* The START bit begins the transaction */
-
- I2CCTL |= I2C_CTL_START;
-
- /* Now loop to receive each data byte */
-
- ptr = buffer;
- for (count = buflen; count; count--)
- {
- /* Wait for the receive buffer to fill */
-
- i2c_waitrxavail();
-
- /* Did we get a byte? Or did an error occur? */
-
- if (I2CSTAT & I2C_STAT_RDRF)
- {
- /* Save the data byte */
-
- *ptr++ = I2CD;
-
- /* If the next byte is the last byte, then set NAK now */
-
- if (count == 2)
- {
- I2CCTL |= I2C_CTL_NAK;
- }
-
- /* If this was the last byte, then set STOP and return success */
-
- else if (count == 1)
- {
- I2CCTL |= I2C_CTL_STOP;
- i2c_semgive();
- return OK;
- }
- }
- /* An error occurred. Clear byte bus and break out of the loop
- * to retry now.
- */
-
- else
- {
- /* No, flush the buffer and toggle the I2C on and off */
-
- I2CCTL |= I2C_CTL_FLUSH;
- I2CCTL &= ~I2C_CTL_IEN;
- I2CCTL |= I2C_CTL_IEN;
-
- /* Break out of the loop early and try again */
-
- break;
- }
- }
- }
- i2c_semgive();
- return -ETIMEDOUT;
-}
-
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: up_i2cinitialize
- *
- * Description:
- * Initialize the selected I2C port. And return a unique instance of struct
- * struct i2c_dev_s. This function may be called to obtain multiple
- * instances of the interface, each of which may be set up with a
- * different frequency and slave address.
- *
- * Input Parameter:
- * Port number (for hardware that has mutiple I2C interfaces)
- *
- * Returned Value:
- * Valid I2C device structre reference on succcess; a NULL on failure
- *
- ****************************************************************************/
-
-FAR struct i2c_dev_s *up_i2cinitialize(int port)
-{
- FAR struct z8_i2cdev_s *i2c;
-
- if (!g_initialized)
- {
- /* Set up some initial BRG value */
-
- uint16 brg = i2c_getbrg(100*1000);
- i2c_setbrg(brg);
-
- /* Make sure that GPIOs are configured for the alternate function (this
- * varies with silicon revisions).
- */
-
- PAADDR = 0x02;
- PACTL |= 0xc0;
-
- /* This semaphore enforces serialized access for I2C transfers */
-
- sem_init(&g_i2csem, 0, 1);
-
- /* Enable I2C -- no interrupts */
-
- I2CCTL = I2C_CTL_IEN;
- }
-
- /* Now, allocate an I2C instance for this caller */
-
- i2c = (FAR struct z8_i2cdev_s *)malloc(sizeof(FAR struct z8_i2cdev_s));
- if (i2c)
- {
- /* Initialize the allocated instance */
-
- i2c->ops = &g_ops;
- i2c->brg = g_currbrg;
- }
- return (FAR struct i2c_dev_s *)i2c;
-}
+/**************************************************************************** + * arch/z80/src/z8/z8_i2c.c + * + * Copyright(C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <stdbool.h> +#include <stdlib.h> +#include <semaphore.h> +#include <errno.h> +#include <assert.h> +#include <debug.h> + +#include <nuttx/i2c.h> +#include <arch/board/board.h> + +#include <eZ8.h> /* eZ8 Register definitions */ +#include "chip.h" /* Register bit definitions */ + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +struct z8_i2cdev_s +{ + const struct i2c_ops_s *ops; /* I2C vtable */ + uint16_t brg; /* Baud rate generator value */ + uint8_t addr; /* 8-bit address */ +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ + +/* Misc. Helpers */ + +static void i2c_waittxempty(void); +static void i2c_waitrxavail(void); +static void i2c_setbrg(uint16_t brg); +static uint16_t i2c_getbrg(uint32_t frequency); + +/* I2C methods */ + +static uint32_t i2c_setfrequency(FAR struct i2c_dev_s *dev, uint32_t frequency); +static int i2c_setaddress(FAR struct i2c_dev_s *dev, int addr, int nbits); +static int i2c_write(FAR struct i2c_dev_s *dev, const uint8_t *buffer, int buflen); +static int i2c_read(FAR struct i2c_dev_s *dev, uint8_t *buffer, int buflen); + +/**************************************************************************** + * Public Function Prototypes + ****************************************************************************/ + +/* This function is normally prototyped int the ZiLOG header file sio.h */ + +extern uint32_t get_freq(void); + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static uint16_t g_currbrg; /* Current BRG setting */ +static bool g_initialized; /* true:I2C has been initialized */ +static sem_t g_i2csem; /* Serialize I2C transfers */ + +const struct i2c_ops_s g_ops = +{ + i2c_setfrequency, + i2c_setaddress, + i2c_write, + i2c_read, +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ +/**************************************************************************** + * Name: i2c_semtake/i2c_semgive + * + * Description: + * Take/Give the I2C semaphore. + * + * Input Parameters: + * None + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_semtake(void) +{ + /* Take the I2C semaphore (perhaps waiting) */ + + while (sem_wait(&g_i2csem) != 0) + { + /* The only case that an error should occr here is if + * the wait was awakened by a signal. + */ + + ASSERT(errno == EINTR); + } +} + +#define i2c_semgive() sem_post(&g_i2csem) + +/**************************************************************************** + * Name: i2c_waittxempty + * + * Description: + * Wait for the transmit data register to become empty. + * + * Input Parameters: + * None + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_waittxempty(void) +{ + int i; + for (i = 0; i < 10000 && (I2CSTAT & I2C_STAT_TDRE) == 0; i++); +} + +/**************************************************************************** + * Name: i2c_waitrxavail + * + * Description: + * Wait until we have received a full byte of data. + * + * Input Parameters: + * None + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_waitrxavail(void) +{ + int i; + for (i = 0; i <= 10000 && (I2CSTAT & (I2C_STAT_RDRF | I2C_STAT_NCKI)) == 0; i++); +} + +/**************************************************************************** + * Name: i2c_setbrg + * + * Description: + * Set the current BRG value for this transaction + * + * Input Parameters: + * brg - BRG to set + * + * Returned Value: + * None + * + ****************************************************************************/ + +static void i2c_setbrg(uint16_t brg) +{ + if (g_currbrg != brg) + { + I2CBRH = (uint8_t)(brg >> 8); + I2CBRL = (uint8_t)(brg & 0xff); + g_currbrg = brg; + } +} + +/**************************************************************************** + * Name: i2c_getbrg + * + * Description: + * Calculate the BRG value + * + * Input Parameters: + * frequency - The I2C frequency requested + * + * Returned Value: + * Returns the actual frequency selected + * + ****************************************************************************/ + +static uint16_t i2c_getbrg(uint32_t frequency) +{ + uint32_t sysclock = get_freq(); + + /* Max is 400 Kb/sec */ + + if (frequency > 400*1000) + { + dbg("Invalid inputs\n"); + frequency = 400*1000; + } + + /* BRG = sysclock / (4 * frequency) */ + + return ((sysclock >> 2) + (frequency >> 1)) / frequency; +} + +/**************************************************************************** + * Name: i2c_setfrequency + * + * Description: + * Set the I2C frequency. This frequency will be retained in the struct + * i2c_dev_s instance and will be used with all transfers. Required. + * + * Input Parameters: + * dev - Device-specific state data + * frequency - The I2C frequency requested + * + * Returned Value: + * Returns the actual frequency selected + * + ****************************************************************************/ + +static uint32_t i2c_setfrequency(FAR struct i2c_dev_s *dev, uint32_t frequency) +{ + FAR struct z8_i2cdev_s *priv = (FAR struct z8_i2cdev_s *)dev; + + /* Sanity Check */ + +#ifdef CONFIG_DEBUG + if (!dev) + { + dbg("Invalid inputs\n"); + return -EINVAL; + } +#endif + + /* Calculate and save the BRG (we won't apply it until the first transfer) */ + + priv->brg = i2c_getbrg(frequency); + return OK; +} + +/**************************************************************************** + * Name: i2c_setaddress + * + * Description: + * Set the I2C slave address. This frequency will be retained in the struct + * i2c_dev_s instance and will be used with all transfers. Required. + * + * Input Parameters: + * dev - Device-specific state data + * address - The I2C slave address + * nbits - The number of address bits provided (7 or 10) + * + * Returned Value: + * Returns the actual frequency selected + * + ****************************************************************************/ + +static int i2c_setaddress(FAR struct i2c_dev_s *dev, int addr, int nbits) +{ + FAR struct z8_i2cdev_s *priv = (FAR struct z8_i2cdev_s *)dev; + + /* Sanity Check */ + +#ifdef CONFIG_DEBUG + if (!dev || (unsigned)addr > 0x7f) + { + dbg("Invalid inputs\n"); + return -EINVAL; + } +#endif + + /* Save the 7-bit address (10-bit address not yet supported) */ + + DEBUGASSERT(nbits == 7); + priv->addr = (uint8_t)addr; + return OK; +} + +/**************************************************************************** + * Name: i2c_write + * + * Description: + * Send a block of data on I2C using the previously selected I2C + * frequency and slave address. Each write operational will be an 'atomic' + * operation in the sense that any other I2C actions will be serialized + * and pend until this write completes. Required. + * + * Input Parameters: + * dev - Device-specific state data + * buffer - A pointer to the read-only buffer of data to be written to device + * buflen - The number of bytes to send from the buffer + * + * Returned Value: + * 0: success, <0: A negated errno + * + ****************************************************************************/ + +static int i2c_write(FAR struct i2c_dev_s *dev, const uint8_t *buffer, int buflen) +{ + FAR struct z8_i2cdev_s *priv = (FAR struct z8_i2cdev_s *)dev; + const uint8_t *ptr; + int retry; + int count; + +#ifdef CONFIG_DEBUG + if (!priv || !buffer || buflen < 1) + { + dbg("Invalid inputs\n"); + return -EINVAL; + } +#endif + + /* Get exclusive access */ + + i2c_semtake(); + + /* Set the frequency */ + + i2c_setbrg(priv->brg); + + /* Retry as necessary to send this whole message */ + + for (retry = 0; retry < 100; retry++) + { + /* Load the address into the transmit register. It is not sent + * until the START bit is set. + */ + + I2CD = I2C_WRITEADDR8(priv->addr); + I2CCTL |= I2C_CTL_START; + + /* Wait for the xmt buffer to become empty */ + + i2c_waittxempty(); + + /* Then send all of the bytes in the buffer */ + + ptr = buffer; + for (count = buflen; count; count--) + { + /* Send a byte of data and wait for it to be sent */ + + I2CD = *ptr++; + i2c_waittxempty(); + + /* If this was the last byte, then send STOP immediately. This + * is because the ACK will not be valid until the STOP clocks out + * the last bit.. Hmmm. If this true then we will never be + * able to send more than one data byte??? + */ + + if (count == 1) + { + I2CCTL |= I2C_CTL_STOP; + + /* If this last byte was ACKed, then the whole buffer + * was successfully sent and we can return success. + */ + + if ((I2CSTAT & I2C_STAT_ACK) != 0) + { + i2c_semgive(); + return OK; + } + + /* If was was not ACKed, then this inner loop will + * terminated (because count will decrement to zero + * and the whole message will be resent + */ + } + + /* Not the last byte... was this byte ACKed? */ + + else if ((I2CSTAT & I2C_STAT_ACK) == 0) + { + /* No, flush the buffer and toggle the I2C on and off */ + + I2CCTL |= I2C_CTL_FLUSH; + I2CCTL &= ~I2C_CTL_IEN; + I2CCTL |= I2C_CTL_IEN; + + /* Break out of the loop early and try again */ + + break; + } + } + } + i2c_semgive(); + return -ETIMEDOUT; +} + +/**************************************************************************** + * Name: i2c_read + * + * Description: + * Receive a block of data from I2C using the previously selected I2C + * frequency and slave address. Each read operational will be an 'atomic' + * operation in the sense that any other I2C actions will be serialized + * and pend until this read completes. Required. + * + * Input Parameters: + * dev - Device-specific state data + * buffer - A pointer to a buffer of data to receive the data from the device + * buflen - The requested number of bytes to be read + * + * Returned Value: + * 0: success, <0: A negated errno + * + ****************************************************************************/ + +static int i2c_read(FAR struct i2c_dev_s *dev, uint8_t *buffer, int buflen) +{ + FAR struct z8_i2cdev_s *priv = (FAR struct z8_i2cdev_s *)dev; + uint8_t *ptr; + int retry; + int count; + +#ifdef CONFIG_DEBUG + if (!priv || !buffer || buflen < 1) + { + dbg("Invalid inputs\n"); + return -EINVAL; + } +#endif + + /* Get exclusive access */ + + i2c_semtake(); + + /* Set the frequency */ + + i2c_setbrg(priv->brg); + + /* Retry as necessary to receive the whole message */ + + for (retry = 0; retry < 100; retry++) + { + /* Load the address into the transmit register. It is not sent + * until the START bit is set. + */ + + I2CD = I2C_READADDR8(priv->addr); + + /* If we want only a single byte of data, then set the NACK + * bit now. + */ + + I2CCTL |= I2C_CTL_NAK; + + /* The START bit begins the transaction */ + + I2CCTL |= I2C_CTL_START; + + /* Now loop to receive each data byte */ + + ptr = buffer; + for (count = buflen; count; count--) + { + /* Wait for the receive buffer to fill */ + + i2c_waitrxavail(); + + /* Did we get a byte? Or did an error occur? */ + + if (I2CSTAT & I2C_STAT_RDRF) + { + /* Save the data byte */ + + *ptr++ = I2CD; + + /* If the next byte is the last byte, then set NAK now */ + + if (count == 2) + { + I2CCTL |= I2C_CTL_NAK; + } + + /* If this was the last byte, then set STOP and return success */ + + else if (count == 1) + { + I2CCTL |= I2C_CTL_STOP; + i2c_semgive(); + return OK; + } + } + /* An error occurred. Clear byte bus and break out of the loop + * to retry now. + */ + + else + { + /* No, flush the buffer and toggle the I2C on and off */ + + I2CCTL |= I2C_CTL_FLUSH; + I2CCTL &= ~I2C_CTL_IEN; + I2CCTL |= I2C_CTL_IEN; + + /* Break out of the loop early and try again */ + + break; + } + } + } + i2c_semgive(); + return -ETIMEDOUT; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_i2cinitialize + * + * Description: + * Initialize the selected I2C port. And return a unique instance of struct + * struct i2c_dev_s. This function may be called to obtain multiple + * instances of the interface, each of which may be set up with a + * different frequency and slave address. + * + * Input Parameter: + * Port number (for hardware that has mutiple I2C interfaces) + * + * Returned Value: + * Valid I2C device structre reference on succcess; a NULL on failure + * + ****************************************************************************/ + +FAR struct i2c_dev_s *up_i2cinitialize(int port) +{ + FAR struct z8_i2cdev_s *i2c; + + if (!g_initialized) + { + /* Set up some initial BRG value */ + + uint16_t brg = i2c_getbrg(100*1000); + i2c_setbrg(brg); + + /* Make sure that GPIOs are configured for the alternate function (this + * varies with silicon revisions). + */ + + PAADDR = 0x02; + PACTL |= 0xc0; + + /* This semaphore enforces serialized access for I2C transfers */ + + sem_init(&g_i2csem, 0, 1); + + /* Enable I2C -- no interrupts */ + + I2CCTL = I2C_CTL_IEN; + } + + /* Now, allocate an I2C instance for this caller */ + + i2c = (FAR struct z8_i2cdev_s *)malloc(sizeof(FAR struct z8_i2cdev_s)); + if (i2c) + { + /* Initialize the allocated instance */ + + i2c->ops = &g_ops; + i2c->brg = g_currbrg; + } + return (FAR struct i2c_dev_s *)i2c; +} diff --git a/nuttx/arch/z80/src/z8/z8_initialstate.c b/nuttx/arch/z80/src/z8/z8_initialstate.c index 57df5c735..794446aac 100644 --- a/nuttx/arch/z80/src/z8/z8_initialstate.c +++ b/nuttx/arch/z80/src/z8/z8_initialstate.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z8/z8_initialstate.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <string.h> #include <nuttx/arch.h> diff --git a/nuttx/arch/z80/src/z8/z8_irq.c b/nuttx/arch/z80/src/z8/z8_irq.c index 5b1d0ccce..be732fe83 100644 --- a/nuttx/arch/z80/src/z8/z8_irq.c +++ b/nuttx/arch/z80/src/z8/z8_irq.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z8/z8_irq.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <ez8.h> #include <nuttx/arch.h> diff --git a/nuttx/arch/z80/src/z8/z8_lowuart.c b/nuttx/arch/z80/src/z8/z8_lowuart.c index e18c4b5d1..15a7999ec 100644 --- a/nuttx/arch/z80/src/z8/z8_lowuart.c +++ b/nuttx/arch/z80/src/z8/z8_lowuart.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z8/z8_loweruart.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <string.h> #include <ez8.h> @@ -51,7 +51,7 @@ #ifdef CONFIG_USE_LOWUARTINIT -extern uint32 get_freq(void); +extern uint32_t get_freq(void); /**************************************************************************** * Private Definitions @@ -75,13 +75,13 @@ extern uint32 get_freq(void); void up_lowuartinit(void) { - uint32 freq = get_freq(); - uint16 brg; - ubyte val; + uint32_t freq = get_freq(); + uint16_t brg; + uint8_t val; #ifdef CONFIG_UART0_SERIAL_CONSOLE - brg = (freq +(uint32)CONFIG_UART0_BAUD * 8) /((uint32)CONFIG_UART0_BAUD * 16) ; + brg = (freq +(uint32_t)CONFIG_UART0_BAUD * 8) /((uint32_t)CONFIG_UART0_BAUD * 16) ; /* Set the baudrate */ diff --git a/nuttx/arch/z80/src/z8/z8_registerdump.c b/nuttx/arch/z80/src/z8/z8_registerdump.c index b7e01a74d..0fb103c7d 100644 --- a/nuttx/arch/z80/src/z8/z8_registerdump.c +++ b/nuttx/arch/z80/src/z8/z8_registerdump.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z8/z8_registerdump.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <debug.h> #include <nuttx/irq.h> @@ -78,7 +78,8 @@ static inline void z8_dumpregs(FAR chipret_t *regs) regs[XCPT_RR8], regs[XCPT_RR10], regs[XCPT_RR12], regs[XCPT_RR14]); } -static inline void z8_dumpstate(chipreg_t sp, chipreg_t pc, ubyte irqctl, chipreg_t rpflags) +static inline void z8_dumpstate(chipreg_t sp, chipreg_t pc, uint8_t irqctl, + chipreg_t rpflags) { lldbg("SP: %04x PC: %04x IRQCTL: %02x RP: %02x FLAGS: %02x\n", sp, pc, irqctl & 0xff, rpflags >> 8, rpflags & 0xff); @@ -100,7 +101,7 @@ void z8_registerdump(void) FAR chipret_t *regs; FAR chipret_t *state; chipreg_t sp; - uint16 rp; + uint16_t rp; switch (g_z8irqstate.state) { @@ -108,7 +109,7 @@ void z8_registerdump(void) /* Calculate the source address based on the saved RP value */ rp = g_z8irqstate.regs[Z8_IRQSAVE_RPFLAGS] >> 8; - regs = (FAR uint16*)(rp & 0xf0); + regs = (FAR uint16_t*)(rp & 0xf0); /* Then dump the register values */ diff --git a/nuttx/arch/z80/src/z8/z8_saveirqcontext.c b/nuttx/arch/z80/src/z8/z8_saveirqcontext.c index 22f5da0ed..2d3fb7aa2 100644 --- a/nuttx/arch/z80/src/z8/z8_saveirqcontext.c +++ b/nuttx/arch/z80/src/z8/z8_saveirqcontext.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z8/z8_saveirqcontext.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <arch/irq.h> #include "chip/switch.h" @@ -93,8 +93,8 @@ void z8_saveirqcontext(FAR chipreg_t *regs) { /* Calculate the source address based on the saved RP value */ - uint16 rp = g_z8irqstate.regs[Z8_IRQSAVE_RPFLAGS] >> 8; - FAR chipreg_t *src = (FAR uint16*)(rp & 0xf0); + uint16_t rp = g_z8irqstate.regs[Z8_IRQSAVE_RPFLAGS] >> 8; + FAR chipreg_t *src = (FAR uint16_t*)(rp & 0xf0); FAR chipreg_t *dest = ®s[XCPT_RR0]; /* Copy the interrupted tasks register into the TCB register save area. */ diff --git a/nuttx/arch/z80/src/z8/z8_schedulesigaction.c b/nuttx/arch/z80/src/z8/z8_schedulesigaction.c index fd9e71520..0a5b9c095 100644 --- a/nuttx/arch/z80/src/z8/z8_schedulesigaction.c +++ b/nuttx/arch/z80/src/z8/z8_schedulesigaction.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z8/z8_schedulesigaction.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <sched.h> #include <debug.h> @@ -123,7 +123,7 @@ static void z8_sigsetup(FAR _TCB *tcb, sig_deliver_t sigdeliver, FAR chipreg_t * void up_schedule_sigaction(FAR _TCB *tcb, sig_deliver_t sigdeliver) { - dbg("tcb=0x%p sigdeliver=0x%04x\n", tcb, (uint16)sigdeliver); + dbg("tcb=0x%p sigdeliver=0x%04x\n", tcb, (uint16_t)sigdeliver); /* Refuse to handle nested signal actions */ diff --git a/nuttx/arch/z80/src/z8/z8_serial.c b/nuttx/arch/z80/src/z8/z8_serial.c index 1f434a66d..f1427eaae 100755 --- a/nuttx/arch/z80/src/z8/z8_serial.c +++ b/nuttx/arch/z80/src/z8/z8_serial.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z8/z8_serial.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -40,6 +40,8 @@ #include <nuttx/config.h> #include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> #include <unistd.h> #include <semaphore.h> #include <string.h> @@ -58,7 +60,7 @@ #ifdef CONFIG_USE_SERIALDRIVER -extern uint32 get_freq(void); +extern uint32_t get_freq(void); /**************************************************************************** * Definitions @@ -76,35 +78,35 @@ extern uint32 get_freq(void); struct z8_uart_s { - ubyte volatile far* uartbase; /* Base address of UART registers */ - uint32 baud; /* Configured baud */ - boolean rxenabled; /* RX interrupt enabled */ - boolean txenabled; /* TX interrupt enabled */ - ubyte rxirq; /* RX IRQ associated with this UART */ - ubyte txirq; /* RX IRQ associated with this UART */ - ubyte parity; /* 0=none, 1=odd, 2=even */ - boolean stopbits2; /* TRUE: Configure with 2 stop bits - * (instead of 1) */ + uint8_t volatile far* uartbase; /* Base address of UART registers */ + uint32_t baud; /* Configured baud */ + bool rxenabled; /* RX interrupt enabled */ + bool txenabled; /* TX interrupt enabled */ + uint8_t rxirq; /* RX IRQ associated with this UART */ + uint8_t txirq; /* RX IRQ associated with this UART */ + uint8_t parity; /* 0=none, 1=odd, 2=even */ + bool stopbits2; /* true: Configure with 2 stop bits + * (instead of 1) */ }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ -static int z8_setup(FAR struct uart_dev_s *dev); -static void z8_shutdown(FAR struct uart_dev_s *dev); -static int z8_attach(FAR struct uart_dev_s *dev); -static void z8_detach(FAR struct uart_dev_s *dev); -static int z8_rxinterrupt(int irq, FAR void *context); -static int z8_txinterrupt(int irq, FAR void *context); -static int z8_ioctl(FAR struct file *filep, int cmd, unsigned long arg); -static int z8_receive(FAR struct uart_dev_s *dev, FAR uint32 *status); -static void z8_rxint(FAR struct uart_dev_s *dev, boolean enable); -static boolean z8_rxavailable(FAR struct uart_dev_s *dev); -static void z8_send(FAR struct uart_dev_s *dev, int ch); -static void z8_txint(FAR struct uart_dev_s *dev, boolean enable); -static boolean z8_txready(FAR struct uart_dev_s *dev); -static boolean z8_txempty(FAR struct uart_dev_s *dev); +static int z8_setup(FAR struct uart_dev_s *dev); +static void z8_shutdown(FAR struct uart_dev_s *dev); +static int z8_attach(FAR struct uart_dev_s *dev); +static void z8_detach(FAR struct uart_dev_s *dev); +static int z8_rxinterrupt(int irq, FAR void *context); +static int z8_txinterrupt(int irq, FAR void *context); +static int z8_ioctl(FAR struct file *filep, int cmd, unsigned long arg); +static int z8_receive(FAR struct uart_dev_s *dev, FAR uint32_t *status); +static void z8_rxint(FAR struct uart_dev_s *dev, bool enable); +static bool z8_rxavailable(FAR struct uart_dev_s *dev); +static void z8_send(FAR struct uart_dev_s *dev, int ch); +static void z8_txint(FAR struct uart_dev_s *dev, bool enable); +static bool z8_txready(FAR struct uart_dev_s *dev); +static bool z8_txempty(FAR struct uart_dev_s *dev); /**************************************************************************** * Private Variables @@ -139,8 +141,8 @@ static struct z8_uart_s g_uart0priv = { Z8_UART0_BASE, /* uartbase */ CONFIG_UART0_BAUD, /* baud */ - FALSE, /* rxenabled */ - FALSE, /* txenabled */ + false, /* rxenabled */ + false, /* txenabled */ Z8_UART0_RX_IRQ, /* rxirq */ Z8_UART0_TX_IRQ, /* txirq */ CONFIG_UART0_PARITY, /* parity */ @@ -150,12 +152,12 @@ static struct z8_uart_s g_uart0priv = static uart_dev_t g_uart0port = { 0, /* open_count */ - FALSE, /* xmitwaiting */ - FALSE, /* recvwaiting */ + false, /* xmitwaiting */ + false, /* recvwaiting */ #ifdef CONFIG_UART0_SERIAL_CONSOLE - TRUE, /* isconsole */ + true, /* isconsole */ #else - FALSE, /* isconsole */ + false, /* isconsole */ #endif { 0 }, /* closesem */ { 0 }, /* xmitsem */ @@ -184,8 +186,8 @@ static struct z8_uart_s g_uart1priv = { Z8_UART1_BASE, /* uartbase */ CONFIG_UART1_BAUD, /* baud */ - FALSE, /* rxenabled */ - FALSE, /* txenabled */ + false, /* rxenabled */ + false, /* txenabled */ Z8_UART1_RX_IRQ, /* rxirq */ Z8_UART1_TX_IRQ, /* txirq */ CONFIG_UART1_PARITY, /* parity */ @@ -195,12 +197,12 @@ static struct z8_uart_s g_uart1priv = static uart_dev_t g_uart1port = { 0, /* open_count */ - FALSE, /* xmitwaiting */ - FALSE, /* recvwaiting */ + false, /* xmitwaiting */ + false, /* recvwaiting */ #ifdef CONFIG_UART1_SERIAL_CONSOLE - TRUE, /* isconsole */ + true, /* isconsole */ #else - FALSE, /* isconsole */ + false, /* isconsole */ #endif { 0 }, /* closesem */ { 0 }, /* xmitsem */ @@ -243,7 +245,8 @@ static uart_dev_t g_uart1port = * Name: z8_putuart ****************************************************************************/ -static inline void z8_putuart(FAR struct z8_uart_s *priv, ubyte value, ubyte offset) +static inline void z8_putuart(FAR struct z8_uart_s *priv, uint8_t value, + uint8_t offset) { putreg8(value, *(priv->uartbase + offset)); } @@ -252,7 +255,7 @@ static inline void z8_putuart(FAR struct z8_uart_s *priv, ubyte value, ubyte off * Name: z8_getuart ****************************************************************************/ -static inline ubyte z8_getuart(FAR struct z8_uart_s *priv, ubyte offset) +static inline uint8_t z8_getuart(FAR struct z8_uart_s *priv, uint8_t offset) { return getreg8(*(priv->uartbase + offset)); } @@ -261,15 +264,15 @@ static inline ubyte z8_getuart(FAR struct z8_uart_s *priv, ubyte offset) * Name: z8_disableuartirq ****************************************************************************/ -static ubyte z8_disableuartirq(FAR struct uart_dev_s *dev) +static uint8_t z8_disableuartirq(FAR struct uart_dev_s *dev) { struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; irqstate_t flags = irqsave(); - ubyte state = priv->rxenabled ? STATE_RXENABLED : STATE_DISABLED | \ + uint8_t state = priv->rxenabled ? STATE_RXENABLED : STATE_DISABLED | \ priv->txenabled ? STATE_TXENABLED : STATE_DISABLED; - z8_txint(dev, FALSE); - z8_rxint(dev, FALSE); + z8_txint(dev, false); + z8_rxint(dev, false); irqrestore(flags); return state; @@ -279,13 +282,13 @@ static ubyte z8_disableuartirq(FAR struct uart_dev_s *dev) * Name: z8_restoreuartirq ****************************************************************************/ -static void z8_restoreuartirq(FAR struct uart_dev_s *dev, ubyte state) +static void z8_restoreuartirq(FAR struct uart_dev_s *dev, uint8_t state) { struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; irqstate_t flags = irqsave(); - z8_txint(dev, (state & STATE_TXENABLED) ? TRUE : FALSE); - z8_rxint(dev, (state & STATE_RXENABLED) ? TRUE : FALSE); + z8_txint(dev, (state & STATE_TXENABLED) ? true : false); + z8_rxint(dev, (state & STATE_RXENABLED) ? true : false); irqrestore(flags); } @@ -294,7 +297,7 @@ static void z8_restoreuartirq(FAR struct uart_dev_s *dev, ubyte state) * Name: z8_consoleput ****************************************************************************/ -static void z8_consoleput(ubyte ch) +static void z8_consoleput(uint8_t ch) { struct z8_uart_s *priv = (struct z8_uart_s*)CONSOLE_DEV.priv; int tmp; @@ -319,8 +322,8 @@ static void z8_consoleput(ubyte ch) void z8_uartconfigure(void) { - uint16 brg; - ubyte val; + uint16_t brg; + uint8_t val; /* Configure GPIO Port A pins 4 & 5 for alternate function */ @@ -364,10 +367,10 @@ static int z8_setup(FAR struct uart_dev_s *dev) { #ifndef CONFIG_SUPPRESS_UART_CONFIG struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; - uint32 freq = get_freq(); - uint16 brg; - ubyte ctl0; - ubyte ctl1; + uint32_t freq = get_freq(); + uint16_t brg; + uint8_t ctl0; + uint8_t ctl1; /* Calculate and set the baud rate generation register. * BRG = (freq + baud * 8)/(baud * 16) @@ -490,7 +493,7 @@ static int z8_rxinterrupt(int irq, FAR void *context) { struct uart_dev_s *dev = NULL; struct z8_uart_s *priv; - ubyte status; + uint8_t status; if (g_uart1priv.rxirq == irq) { @@ -539,7 +542,7 @@ static int z8_txinterrupt(int irq, FAR void *context) { struct uart_dev_s *dev = NULL; struct z8_uart_s *priv; - ubyte status; + uint8_t status; if (g_uart1priv.txirq == irq) { @@ -592,15 +595,15 @@ static int z8_ioctl(FAR struct file *filep, int cmd, unsigned long arg) * ****************************************************************************/ -static int z8_receive(FAR struct uart_dev_s *dev, FAR uint32 *status) +static int z8_receive(FAR struct uart_dev_s *dev, FAR uint32_t *status) { struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; - ubyte rxd; - ubyte stat0; + uint8_t rxd; + uint8_t stat0; rxd = z8_getuart(priv, Z8_UART_RXD); stat0 = z8_getuart(priv, Z8_UART_STAT0); - *status = (uint32)rxd | (((uint32)stat0) << 8); + *status = (uint32_t)rxd | (((uint32_t)stat0) << 8); return rxd; } @@ -612,7 +615,7 @@ static int z8_receive(FAR struct uart_dev_s *dev, FAR uint32 *status) * ****************************************************************************/ -static void z8_rxint(FAR struct uart_dev_s *dev, boolean enable) +static void z8_rxint(FAR struct uart_dev_s *dev, bool enable) { struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; irqstate_t flags = irqsave(); @@ -636,11 +639,11 @@ static void z8_rxint(FAR struct uart_dev_s *dev, boolean enable) * Name: z8_rxavailable * * Description: - * Return TRUE if the receive fifo is not empty + * Return true if the receive fifo is not empty * ****************************************************************************/ -static boolean z8_rxavailable(FAR struct uart_dev_s *dev) +static bool z8_rxavailable(FAR struct uart_dev_s *dev) { struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; return ((z8_getuart(priv, Z8_UART_STAT0) & Z8_UARTSTAT0_RDA) != 0); @@ -668,7 +671,7 @@ static void z8_send(FAR struct uart_dev_s *dev, int ch) * ****************************************************************************/ -static void z8_txint(FAR struct uart_dev_s *dev, boolean enable) +static void z8_txint(FAR struct uart_dev_s *dev, bool enable) { struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; irqstate_t flags = irqsave(); @@ -692,11 +695,11 @@ static void z8_txint(FAR struct uart_dev_s *dev, boolean enable) * Name: z8_txready * * Description: - * Return TRUE if the tranmsit fifo is not full + * Return true if the tranmsit fifo is not full * ****************************************************************************/ -static boolean z8_txready(FAR struct uart_dev_s *dev) +static bool z8_txready(FAR struct uart_dev_s *dev) { struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; return ((z8_getuart(priv, Z8_UART_STAT0) & Z8_UARTSTAT0_TDRE) != 0); @@ -706,11 +709,11 @@ static boolean z8_txready(FAR struct uart_dev_s *dev) * Name: z8_txempty * * Description: - * Return TRUE if the transmit fifo is empty + * Return true if the transmit fifo is empty * ****************************************************************************/ -static boolean z8_txempty(FAR struct uart_dev_s *dev) +static bool z8_txempty(FAR struct uart_dev_s *dev) { struct z8_uart_s *priv = (struct z8_uart_s*)dev->priv; return ((z8_getuart(priv, Z8_UART_STAT0) & Z8_UARTSTAT0_TXE) != 0); @@ -736,7 +739,7 @@ void up_serialinit(void) (void)z8_disableuartirq(&TTYS1_DEV); /* Initialize the console for early use */ - CONSOLE_DEV.isconsole = TRUE; + CONSOLE_DEV.isconsole = true; z8_setup(&CONSOLE_DEV); /* Reigster console and tty devices */ @@ -757,7 +760,7 @@ void up_serialinit(void) int up_putc(int ch) { - ubyte state; + uint8_t state; /* Keep interrupts disabled so that we do not interfere with normal * driver operation @@ -776,7 +779,7 @@ int up_putc(int ch) /* Output the character */ - z8_consoleput((ubyte)ch); + z8_consoleput((uint8_t)ch); /* It is important to restore the TX interrupt while the send is pending. * otherwise, TRDE interrupts can be lost since they do not pend after the @@ -797,12 +800,12 @@ int up_putc(int ch) # define z8_contrde() \ ((getreg8(*(Z8_UART1_BASE+Z8_UART_STAT0)) & Z8_UARTSTAT0_TDRE) != 0) # define z8_contxd(ch) \ - putreg8((ubyte)(ch), *(Z8_UART1_BASE+Z8_UART_TXD)) + putreg8((uint8_t)(ch), *(Z8_UART1_BASE+Z8_UART_TXD)) #else # define z8_contrde() \ ((getreg8(*(Z8_UART0_BASE+Z8_UART_STAT0)) & Z8_UARTSTAT0_TDRE) != 0) # define z8_contxd(ch) \ - putreg8((ubyte)(ch), *(Z8_UART0_BASE+Z8_UART_TXD)) + putreg8((uint8_t)(ch), *(Z8_UART0_BASE+Z8_UART_TXD)) #endif /**************************************************************************** diff --git a/nuttx/arch/z80/src/z8/z8_sigdeliver.c b/nuttx/arch/z80/src/z8/z8_sigdeliver.c index 7e7700ed1..badb8a328 100644 --- a/nuttx/arch/z80/src/z8/z8_sigdeliver.c +++ b/nuttx/arch/z80/src/z8/z8_sigdeliver.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z8/z8_sigdeliver.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <sched.h> #include <debug.h> diff --git a/nuttx/arch/z80/src/z8/z8_timerisr.c b/nuttx/arch/z80/src/z8/z8_timerisr.c index 7bccbafdc..a317cf3b9 100644 --- a/nuttx/arch/z80/src/z8/z8_timerisr.c +++ b/nuttx/arch/z80/src/z8/z8_timerisr.c @@ -1,7 +1,7 @@ /*************************************************************************** * arch/z80/src/z8/z8_timerisr.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <debug.h> #include <ez8.h> @@ -67,7 +67,7 @@ /* This function is normally prototyped int the ZiLOG header file sio.h */ -extern uint32 get_freq(void); +extern uint32_t get_freq(void); /*************************************************************************** * Function: up_timerisr @@ -78,7 +78,7 @@ extern uint32 get_freq(void); * ***************************************************************************/ -int up_timerisr(int irq, uint32 *regs) +int up_timerisr(int irq, uint32_t *regs) { /* Process timer interrupt */ @@ -97,7 +97,7 @@ int up_timerisr(int irq, uint32 *regs) void up_timerinit(void) { - uint32 reload; + uint32_t reload; up_disable_irq(Z8_IRQ_SYSTIMER); @@ -129,7 +129,7 @@ void up_timerinit(void) */ reload = get_freq() / 400; - putreg16((uint16)reload, T0R); + putreg16((uint16_t)reload, T0R); /* Write to the timer control register to enable the timer and to * initiate counting diff --git a/nuttx/arch/z80/src/z80/chip.h b/nuttx/arch/z80/src/z80/chip.h index 10322b5a0..5874f733b 100644 --- a/nuttx/arch/z80/src/z80/chip.h +++ b/nuttx/arch/z80/src/z80/chip.h @@ -2,7 +2,7 @@ * z80/chip.h * chip/chip.h * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -41,6 +41,10 @@ * Included Files ************************************************************************************/ +#ifndef __ASSEMBLY__ +# include <stdint.h> +#endif + /************************************************************************************ * Definitions ************************************************************************************/ @@ -58,12 +62,12 @@ #ifndef __ASSEMBLY__ -# define getreg8(a) (*(volatile ubyte *)(a)) -# define putreg8(v,a) (*(volatile ubyte *)(a) = (v)) -# define getreg16(a) (*(volatile uint16 *)(a)) -# define putreg16(v,a) (*(volatile uint16 *)(a) = (v)) -# define getreg32(a) (*(volatile uint32 *)(a)) -# define putreg32(v,a) (*(volatile uint32 *)(a) = (v)) +# define getreg8(a) (*(volatile uint8_t *)(a)) +# define putreg8(v,a) (*(volatile uint8_t *)(a) = (v)) +# define getreg16(a) (*(volatile uint16_t *)(a)) +# define putreg16(v,a) (*(volatile uint16_t *)(a) = (v)) +# define getreg32(a) (*(volatile uint32_t *)(a)) +# define putreg32(v,a) (*(volatile uint32_t *)(a) = (v)) #endif diff --git a/nuttx/arch/z80/src/z80/switch.h b/nuttx/arch/z80/src/z80/switch.h index 318a01a13..f30f41b9c 100644 --- a/nuttx/arch/z80/src/z80/switch.h +++ b/nuttx/arch/z80/src/z80/switch.h @@ -41,9 +41,9 @@ * Included Files ************************************************************************************/ -#include <sys/types.h> #include <nuttx/sched.h> #include <nuttx/arch.h> + #include "up_internal.h" /************************************************************************************ @@ -60,7 +60,7 @@ #define INIT_IRQCONTEXT() current_regs = NULL -/* IN_INTERRUPT returns TRUE if the system is currently operating in the interrupt +/* IN_INTERRUPT returns true if the system is currently operating in the interrupt * context. IN_INTERRUPT is the inline equivalent of up_interrupt_context(). */ diff --git a/nuttx/arch/z80/src/z80/z80_copystate.c b/nuttx/arch/z80/src/z80/z80_copystate.c index 02dd4841c..b49196f93 100644 --- a/nuttx/arch/z80/src/z80/z80_copystate.c +++ b/nuttx/arch/z80/src/z80/z80_copystate.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z80/z80_copystate.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <arch/irq.h> #include "chip/switch.h" diff --git a/nuttx/arch/z80/src/z80/z80_initialstate.c b/nuttx/arch/z80/src/z80/z80_initialstate.c index f9d3456b1..fc65dbca5 100644 --- a/nuttx/arch/z80/src/z80/z80_initialstate.c +++ b/nuttx/arch/z80/src/z80/z80_initialstate.c @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <string.h> #include <nuttx/arch.h> diff --git a/nuttx/arch/z80/src/z80/z80_io.c b/nuttx/arch/z80/src/z80/z80_io.c index fdd72f125..780d5f674 100644 --- a/nuttx/arch/z80/src/z80/z80_io.c +++ b/nuttx/arch/z80/src/z80/z80_io.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z80/z80_io.c * - * Copyright (C) 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -38,9 +38,6 @@ ****************************************************************************/ #include <nuttx/config.h> - -#include <sys/types.h> - #include <nuttx/arch.h> /* #include <nuttx/irq.h> */ diff --git a/nuttx/arch/z80/src/z80/z80_irq.c b/nuttx/arch/z80/src/z80/z80_irq.c index f3b37bcb4..8b46acc40 100644 --- a/nuttx/arch/z80/src/z80/z80_irq.c +++ b/nuttx/arch/z80/src/z80/z80_irq.c @@ -38,9 +38,6 @@ ****************************************************************************/ #include <nuttx/config.h> - -#include <sys/types.h> - #include <nuttx/arch.h> #include <nuttx/irq.h> diff --git a/nuttx/arch/z80/src/z80/z80_registerdump.c b/nuttx/arch/z80/src/z80/z80_registerdump.c index e9c4e77db..f215b6dc6 100644 --- a/nuttx/arch/z80/src/z80/z80_registerdump.c +++ b/nuttx/arch/z80/src/z80/z80_registerdump.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z80/z80_registerdump.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <debug.h> #include <nuttx/irq.h> diff --git a/nuttx/arch/z80/src/z80/z80_schedulesigaction.c b/nuttx/arch/z80/src/z80/z80_schedulesigaction.c index 6844b44e1..19ea6d6bc 100644 --- a/nuttx/arch/z80/src/z80/z80_schedulesigaction.c +++ b/nuttx/arch/z80/src/z80/z80_schedulesigaction.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z80/z80_schedulesigaction.c * - * Copyright (C) 2007,2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,7 @@ #include <nuttx/config.h> -#include <sys/types.h> +#include <stdint.h> #include <sched.h> #include <debug.h> @@ -123,7 +123,7 @@ static void z80_sigsetup(FAR _TCB *tcb, sig_deliver_t sigdeliver, FAR chipreg_t void up_schedule_sigaction(FAR _TCB *tcb, sig_deliver_t sigdeliver) { - dbg("tcb=0x%p sigdeliver=0x%04x\n", tcb, (uint16)sigdeliver); + dbg("tcb=0x%p sigdeliver=0x%04x\n", tcb, (uint16_t)sigdeliver); /* Refuse to handle nested signal actions */ diff --git a/nuttx/arch/z80/src/z80/z80_sigdeliver.c b/nuttx/arch/z80/src/z80/z80_sigdeliver.c index 06b43d1df..884a5c4b6 100644 --- a/nuttx/arch/z80/src/z80/z80_sigdeliver.c +++ b/nuttx/arch/z80/src/z80/z80_sigdeliver.c @@ -1,7 +1,7 @@ /**************************************************************************** * arch/z80/src/z80/z80_sigdeliver.c * - * Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved. + * Copyright (C) 2007-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt <spudmonkey@racsa.co.cr> * * Redistribution and use in source and binary forms, with or without @@ -39,7 +39,6 @@ #include <nuttx/config.h> -#include <sys/types.h> #include <sched.h> #include <debug.h> |