diff options
Diffstat (limited to 'nuttx/configs/pic32mx7mmb/README.txt')
| -rw-r--r-- | nuttx/configs/pic32mx7mmb/README.txt | 32 |
1 files changed, 17 insertions, 15 deletions
diff --git a/nuttx/configs/pic32mx7mmb/README.txt b/nuttx/configs/pic32mx7mmb/README.txt index 3f47e0233..197602c7a 100644 --- a/nuttx/configs/pic32mx7mmb/README.txt +++ b/nuttx/configs/pic32mx7mmb/README.txt @@ -572,10 +572,17 @@ Where <subdir> is one of the following: The OS test produces all of its test output on the serial console. This configuration has UART1 enabled as a serial console. - USB Configuations. - ----------------- + SD Card Support + --------------- + SD card support is built into this example by default: + + CONFIG_PIC32MX_SPI1=y + CONFIG_NSH_ARCHINIT=y + + USB Configurations. + ------------------ Several USB device configurations can be enabled and included - as NSH built-in built in functions. + as NSH built-in built in functions. USB is *not* enabled by default. To use USB device, connect the starter kit to the host using a cable with a Type-B micro-plug to the starter kit’s micro-A/B port J5, located @@ -612,11 +619,9 @@ Where <subdir> is one of the following: to enable the USB mass storage device. However, this device cannot work until support for the SD card is also incorporated. - Networking Configuations. - ------------------------- - Several Networking configurations can be enabled and included - as NSH built-in built in functions. The following additional - configuration settings are required: + Networking Configurations. + -------------------------- + Networking is enabled by default in this configuration: CONFIG_NET=y : Enable networking support CONFIG_PIC32MX_ETHERNET=y : Enable the PIC32 Ethernet driver @@ -628,6 +633,8 @@ Where <subdir> is one of the following: CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) : Target IP address 10.0.0.2 CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1 + This will probably need to be customized for your network. + NOTES: 1. This logic will assume that a network is connected. During its initialization, it will try to negotiate the link speed. If you have @@ -636,19 +643,14 @@ Where <subdir> is one of the following: before the networking finally gives up and decides that no network is available. - 2. To add SPI-based support for the SD card slot: - - CONFIG_PIC32MX_SPI1=y - CONFIG_NSH_ARCHINIT=y - - 3. This example can support an FTP client. In order to build in FTP client + 2. This example can support an FTP client. In order to build in FTP client support simply uncomment the following lines in the appconfig file (before configuring) or in the apps/.config file (after configuring): #CONFIGURED_APPS += netutils/ftpc #CONFIGURED_APPS += examples/ftpc - 4. This example can support an FTP server. In order to build in FTP server + 3. This example can support an FTP server. In order to build in FTP server support simply uncomment the following lines in the appconfig file (before configuring) or in the apps/.config file (after configuring): |