Remove the 16z board support from the main source tree. It is still avaialable in the misc/Obsoleted directory

18 files changed, 2872 insertions, 2 deletions

diff --git a/misc/Obsoleted/ChangeLog b/misc/Obsoleted/ChangeLog
index 2b0f137ee..dc86c53e5 100644
--- a/misc/Obsoleted/ChangeLog
+++ b/misc/Obsoleted/ChangeLog
@@ -17,6 +17,21 @@ ChangeLog
   4. I do not thing that anyone has ever used the port and because of bit
      rot, it is not even certain that it is still function.
 
-  NEW HOME:  misc/Obsoleted/arch/8051 and misc/Obsoleted/configs/pjrc-8051
+  NEW HOME:
+    misc/Obsoleted/arch/8051 and misc/Obsoleted/configs/pjrc-8051
+
+  REMOVAL PATCH:
+    misc/Obsoleted/Patches/Remove-8051-2014-9-1.patch
+
+2014-9-5:  Removed support for the 16z board from the main source tree.
+
+  REASON:
+    The port is not yet ready for use.  It may return to the NuttX source
+    tree at some point in the future.
+
+  NEW HOME:
+    misc/Obsoleted/configs/16z
+
+  REMOVAL PATCH:
+    misc/Obsoleted/Patches/Remove-16z-2014-9-5.patch
 
-  REMOVE PATCH:  misc/Obsoleted/Patches/Remove-8051-2014-9-1.patch
diff --git a/misc/Obsoleted/configs/16z/Kconfig b/misc/Obsoleted/configs/16z/Kconfig
new file mode 100644
index 000000000..3fc0b59be
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/Kconfig
@@ -0,0 +1,20 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if CONFIG_ARCH_BOARD_16Z
+
+config 16Z_RFTRANSCEIVER
+	bool "RF Transceiver installed"
+	default n
+	---help---
+		Select this option if the on-board RF transceiver is installed
+
+config 16Z_SERIAL_MEMORY
+	bool "Serial memory"
+	default n
+	---help---
+		Select this option if the on-board serial memory is installed
+
+endif # CONFIG_ARCH_BOARD_16Z
diff --git a/misc/Obsoleted/configs/16z/README.txt b/misc/Obsoleted/configs/16z/README.txt
new file mode 100644
index 000000000..03338ada6
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/README.txt
@@ -0,0 +1,326 @@
+README.txt
+==========
+
+This is the README file for the NuttX port to the 16z board. The 16z board
+is based on the ZiLOG ZNEOZ16F2811AL20EG part.  See https://github.com/toyaga/16z
+for further information.
+
+Contents
+========
+
+  - GPIO Configuration
+  - ZDS-II Compiler Versions
+  - Patches
+  - Serial Console
+  - LEDs
+  - RAM
+  - Selecting Configurations
+  - Configuration Sub-directories
+
+GPIO Configuration
+==================
+
+  --------------------------- ------ --------------------------------------------
+  GPIO                        SIGNAL On-Board Connections
+  --------------------------- ------ --------------------------------------------
+  PA0/T0IN/T0OUT/DMA0REQ      GP8    PS/2 / GPIO, Expansion slots
+  PA1/T0OUT/DMA0ACK           GP9    PS/2 / GPIO, Expansion slots
+  PA2/DE0/FAULTY              ~INTI  Power section, RF transceiver (1)
+  PA3/CTS0/FAULT0             ~INTX  Expansion slots
+  PA4/RXD0/CS1                RXD    MAX3232D RS-232
+  PA5/TXD0/CS2                TXD    MAX3232D RS-232
+  PA6/SCL/CS3                 SCL    RTC / UID, Expansion slots
+  PA7/SDA/CS4                 SDA    RTC / UID, Expansion slots
+  --------------------------- ------ --------------------------------------------
+  PB0/ANA0/T0IN0              GP0    Expansion slots
+  PB1/ANA1/T0IN1              GP1    Expansion slots
+  PB2/ANA2/T0IN2              GP2    Expansion slots
+  PB3/ANA3/OPOUT              GP3    Expansion slots
+  PB4/ANA4                    GP4    Expansion slots
+  PB5/ANA5                    GP5    Expansion slots
+  PB6/ANA6/OPINP/CINN         GP6    Expansion slots
+  PB7/ANA7/OPINN              GP7    Expansion slots
+  --------------------------- ------ --------------------------------------------
+  PC0/T1IN/T1OUT/DMA1REQ/CINN GP10   PS/2 / GPIO, Expansion slots
+  PC1/T1OUT/DMA1ACK/COMPOUT   GP11   PS/2 / GPIO, Expansion slots
+  PC2/SS/CS4                  ~EXP   Expansion slots
+  PC3/SCK/DMA2REQ             SCK    FT800Q, Serial memory (1), RF Transceiver (1),
+                                     Expansion slots, SD0, 1, and 2
+  PC4/MOSI/DMA2ACK            MOSI   FT800Q, Serial memory (1), RF Transceiver (1),
+                                     Expansion slots, SD0, 1, and 2
+  PC5/MISO/CS5                MISO   FT800Q, Serial memory (1), RF Transceiver (1),
+                                     Expansion slots, SD0, 1, and 2
+  PC6/T2IN/T2OUT/PWMH0        ~CTS   MAX3232D RS-232
+  PC7/T2OUT/PWML0             ~RTS   MAX3232D RS-232, Power section (?)
+  --------------------------- ------ --------------------------------------------
+  PD0/PWMH1/ADR20             A20    RAM, Expansion slots
+  PD1/PWML1/ADR21             A21    RAM, Expansion slots
+  PD2/PWMH2/ADR22             A22    RAM, Expansion slots
+  PD3/DE1/ADR16               A16    RAM, Expansion slots
+  PD4/RXD1/ADR18              A18    RAM, Expansion slots
+  PD5/TXD1/ADR19              A19    RAM, Expansion slots
+  PD6/CTS1/ADR17              A17    RAM, Expansion slots
+  PD7/PWML2/ADR23             A23    Expansion slots
+  --------------------------- ------ --------------------------------------------
+  PE0/DATA0                   D0     RAM, Expansion slots
+  PE1/DATA1                   D1     RAM, Expansion slots
+  PE2/DATA2                   D2     RAM, Expansion slots
+  PE3/DATA3                   D3     RAM, Expansion slots
+  PE4/DATA4                   D4     RAM, Expansion slots
+  PE5/DATA5                   D5     RAM, Expansion slots
+  PE6/DATA6                   D6     RAM, Expansion slots
+  PE7/DATA7                   D7     RAM, Expansion slots
+  --------------------------- ------ --------------------------------------------
+  PF0/ADR0                    A0     Expansion slots
+  PF1/ADR1                    A1     RAM, Expansion slots
+  PF2/ADR2                    A2     RAM, Expansion slots
+  PF3/ADR3                    A3     RAM, Expansion slots
+  PF4/ADR4                    A4     RAM, Expansion slots
+  PF5/ADR5                    A5     RAM, Expansion slots
+  PF6/ADR6                    A6     RAM, Expansion slots
+  PF7/ADR7                    A7     RAM, Expansion slots
+  --------------------------- ------ --------------------------------------------
+  PG0/ADR0                    A8     RAM, Expansion slots
+  PG1/ADR0                    A9     RAM, Expansion slots
+  PG2/ADR0                    A10    RAM, Expansion slots
+  PG3/ADR0                    A11    RAM, Expansion slots
+  PG4/ADR0                    A12    RAM, Expansion slots
+  PG5/ADR0                    A13    RAM, Expansion slots
+  PG6/ADR0                    A14    RAM, Expansion slots
+  PG7/ADR0                    A15    RAM, Expansion slots
+  --------------------------- ------ --------------------------------------------
+  PH0/ANA8/WR                 ~WR    RAM, Expansion slots
+  PH1/ANA9/RD                 ~RD    RAM, Expansion slots
+  PH2/ANA10/CS0               ~RF    LED3, RF transceiver, X2 (1)
+  PH3/ANA11/CINP/WAIT         ~SXM   LED4, Chip select for the serial memory, U4 (1)
+  --------------------------- ------ --------------------------------------------
+  PJ0/DATA8                   ~SD1   LED5, Chip select for the SD card 1, X11.
+  PJ1/DATA9                   ~DT1   Card detect for SD card 1
+  PJ2/DATA10                  WP1    Write protect for SD card 1
+  PJ3/DATA11                  EVE    EVE chip select
+  PJ4/DATA12                  ~SD2   LED6, Chip select for the SD card 2, X10.
+  PJ5/DATA13                  ~DT2   Card detect for SD card 2
+  PJ6/DATA14                  WP2    Write protect for SD card 2
+  PJ7/DATA15                  ~SD0   LED7, Chip select for the microSD 0, X12.
+  --------------------------- ------ --------------------------------------------
+  PK0/BHEN                    ~BHE   RAM, Expansion slots
+  PK1/BLEN                    ~BLE   RAM, Expansion slots
+  PK2/CS0                     ~0000  Bottom RAM bank, Expansion slots
+  PK3/CS1                     ~8000  Top RAM bank, Expansion slots
+  PK4/CS2                     ~F000  Expansion slots
+  PK5/CS3                     ~FFC8  Expansion slots
+  PK6/CS4                     ~FFD0  Expansion slots
+  PK7/CS5                     ~FFD8  Expansion slots
+  --------------------------- ------ --------------------------------------------
+
+  Note 1:  Not populated on my board
+
+ZDS-II Compiler Versions
+========================
+
+Version 5.0.1
+
+  All testing has been performed with ZSD II verion 5.0.1 for the ZNEO.
+
+  There are some problems with this compiler version.  See the section
+  entitled "Patches" below.
+
+Other Versions
+
+  If you use any version of ZDS-II other than 5.0.1 or if you install ZDS-II
+  at any location other than the default location, you will have to modify
+  two files:  (1) configs/16z/*/setenv.sh and (2) configs/16z/*/Make.defs.
+  Simply edit these two files, changing 5.0.1 to whatever.
+
+Patches
+=======
+
+A bug has been found in the ZDS-II toolchain version 5.0.1.  a patch is
+available to work around the bug.  A summary of the nature the bug and
+instructions for applying the patch follow.
+
+Parameters are passed different to variadic functions (i.e., functions
+that accept a varying number of parameters) than to regular functions.  For
+most functions, parameters are passed in registers, beginning with R1.  But
+for variadic functions, all parameters must be passed on the stack.
+
+The logic works correctly for global functions, local functions, and most
+function pointers.  It does not work correctly for the case where a variadic
+function point is included within a structure.  In that case, the caller
+inappropriately passes the parameters in registers; the receiver will
+attempt to recover the parameters from the stack and a failure then follows.
+
+This bug prevents the use of NSH with the ZNEO.  However, a patch has been
+developed that works around the problem.  That patch can be found at
+configs/16z/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch.  In that
+directory is also a bash script that will apply that patch for you.
+
+The patch would be applied when NuttX is configured as follows:
+
+  cd tools
+  ./configure.sh 16z/nsh
+  cd ..
+  . ./setenv.sh
+  dopatch.sh
+  make
+
+The patch can also be removed with:
+
+  dopatch.sh -R
+
+See the section "Selecting Configurations" below.
+
+UPDATE:  2014-4-27:  The nsh example still does not run correctly.  This
+is believe to be caused by additional, undiagnosed compiler errors.
+
+Serial Console
+==============
+
+The 16z supports a single UART, UART0, that will be used to support the
+NuttX serial console.
+
+LEDs
+====
+
+The 16z board has 7 LEDs, five of which are controllable via software:
+
+  ----- ------ ------ ------------------------------------
+  LED   Color  Signal Description
+  ----- ------ ------ ------------------------------------
+  LED1  Red     3V3   Indicates the presence of +3.3V
+  LED2  Red     5V    Indicates the presence of +5V
+
+  LED3  Blue    ~RF   Controlled via PH2.  Notes: 1, 2
+  LED4  Green   ~SXM  Controlled via PH3.  Notes: 1, 3
+  LED5  Green   ~SD1  Controlled via PJ0.  Notes: 1, 4
+  LED6  Yellow  ~SD2  Controlled via PJ4.  Notes: 1, 5
+  LED7  Yellow  ~SD0  Controlled via PJ7.  Notes: 1, 6
+  ----- ------ ------ ------------------------------------
+
+  Note 1:  Pulled high so a low output illuminates the LED.
+  Note 2:  PH2/~RF is also used by the RF transceiver, X2.  That part is not
+           populated on my board.
+  Note 3:  ~SXM is the chip select for the serial memory, U4.  That part is
+           not populated on my board.
+  Note 4:  ~SD1 is the chip select for the SD card 1, X11.
+  Note 5:  ~SD2 is the chip select for the SD card 2, X10.
+  Note 6:  ~SD0 is the chip select for the microSD 0, X12.
+
+In conclusion:  None of the LEDs are available to indicate software status
+without potentially sacrificing board functionality.  If the RF transceiver
+is not installed (CONFIG_16Z_RFTRANSCEIVER=n) and if LED support is
+requested (CONFIG_ARCH_LEDS), then LED3 will be used to indicate status:  A
+solid color means that the board has boot successfully; flashing at a rate
+of approximately 2Hz indicates a software failure.
+
+RAM
+===
+
+The 16z has two IS66WVE4M16BLL 64Mb (4M x 16b) "Pseudo" SRAM parts on board.
+This provides a total of 16MiB of SRAM from program usage.
+
+Selecting Configurations
+========================
+
+Variations on the basic 16z configuration are maintained in subdirectories.
+To configure any specific configuration, do the following steps:
+
+   cd <nuttx-top-directory>/tools
+   ./configure.sh 16z/<sub-directory>
+   cd <nuttx-top-directory>
+   make
+
+Where <sub-directory> is the specific board configuration that you wish to
+build.  The following board-specific configurations are available.  You may
+also need to apply a path to NuttX before making.  Please refer the the
+section "Patches" above"
+
+Before entering the make command, make certain that the path to the ZNEO
+compiler is in you PATH variable.  You make modify and use the setenv.sh
+script to set that PATH if you like.  You can simply source setenv.sh
+before making like:
+
+  ...
+  . ./setenv.sh
+  make
+
+Configuration Sub-directories
+=============================
+
+source/ and include/
+--------------------
+
+  These directories contain common logic for all 16z configurations.
+
+nsh
+---
+  nsh:
+    This configuration directory will built the NuttShell (NSH).  See
+    the NSH user manual in the documents directory (or online at nuttx.org).
+    See also the README.txt file in the nsh sub-directory for information
+    about using ZDS-II.
+
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. By default, this configuration assumes that you are using the
+       Cygwin environment on Windows.  An option is to use the native
+       CMD.exe window build as described in the top-level README.txt
+       file.  To set up that configuration:
+
+       -CONFIG_WINDOWS_CYGWIN=y
+       +CONFIG_WINDOWS_NATIVE=y
+
+       And after configuring, make sure that CONFIG_APPS_DIR uses
+       the back slash character.  For example:
+
+        CONFIG_APPS_DIR="..\apps"
+
+    3. By default, this configuration assumes that you are using the
+       Cygwin environment on Windows.  An option is to use the native
+       CMD.exe window build as described in the top-level README.txt
+       file.  To set up that configuration:
+
+       -CONFIG_WINDOWS_CYGWIN=y
+       +CONFIG_WINDOWS_NATIVE=y
+
+       And after configuring, make sure that CONFIG_APPS_DIR uses
+       the back slash character.  For example:
+
+        CONFIG_APPS_DIR="..\apps"
+
+      NOTES:
+
+      a. If you need to change the toolchain path used in Make.defs, you
+         will need to use the short 8.3 filenames to avoid spaces.  On my
+         PC, C:\PROGRA~1\ is is C:\Program Files\ and C:\PROGRA~2\ is
+         C:\Program Files (x86)\
+      b. You can't use setenv.sh in the native Windows environment.  Try
+         scripts/setenv.bat instead.
+      c. At present, the native Windows build fails at the final link stages.
+         The failure is due to problems in arch/z16/src/nuttx.linkcmd that
+         is autogenerated by arch/z16/src/Makefile.  The basic problem
+         is the spurious spaces and and carrirage returns are generated at
+         the end of the lines after a line continuation (\ ^M).  If these
+         trailing bad characters are manually eliminated, then the build
+         will succeed on the next try.
+
+   STATUS:
+
+     1. Note that you must apply the ZNEO patch if you are using ZDS-II 5.0.1.
+        See the README.txt file in the parent directory for more information.
+
+     2. This configuration does not run correctly.  This is believed to a yet
+        another ZDS-II compiler problem.  The corresponding NSH configuration
+        of the z16f2800100zcog does work, however, so this could also be an
+        issue with the 16z.
+
+Check out any README.txt files in these <sub-directory>s.
diff --git a/misc/Obsoleted/configs/16z/include/board.h b/misc/Obsoleted/configs/16z/include/board.h
new file mode 100644
index 000000000..a60e1a359
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/include/board.h
@@ -0,0 +1,177 @@
+/****************************************************************************
+ * configs/16z/include/board.h
+ *
+ *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __CONFIGS_16Z_INCLUDE_BOARD_H
+#define __CONFIGS_16Z_INCLUDE_BOARD_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* The 16Z board has a 18.432MHz crystal.  The ZNEO clocking will be
+ * configured to use this crystal frequency directly as the clock source
+ */
+
+#define BOARD_XTAL_FREQUENCY   18432000 /* 18.432MHz */
+#define BOARD_CLKSRC           1        /* Clock source = external crystal */
+#define BOARD_SYSTEM_FREQUENCY BOARD_XTAL_FREQUENCY
+
+/* Flash option bits
+ *
+ * "Each time the option bits are programmed or erased, the device must be
+ *  Reset for the change to take place. During any reset operation .., the
+ *  option bits are automatically read from the Program memory and written
+ *  to Option Configuration registers. ... Option Bit Control Register are
+ *  loaded before the device exits Reset and the ZNEO CPU begins code
+ *  execution. The Option Configuration registers are not part of the
+ *  Register file and are not accessible for read or write access."
+ *
+ * "The FLASH3 value of 0x7f is very important because it enables the
+ *  J-port, otherwise used for 16-bit data.
+ *
+ * "... in 16z there are some unusual hardware connections. ZNEO
+ *  communicates with 16-bit memory via 8-bit bus and using the 16-bit
+ *  control signals BHE and BLE."
+ */
+
+#ifndef __ASSEMBLY__
+#  define BOARD_FLOPTION0 (Z16F_FLOPTION0_MAXPWR | Z16F_FLOPTION0_WDTRES | \
+                           Z16F_FLOPTION0_WDTA0 | Z16F_FLOPTION0_VBOA0 | \
+                           Z16F_FLOPTION0_DBGUART | Z16F_FLOPTION0_FWP | \
+                           Z16F_FLOPTION0_RP)
+
+#  define BOARD_FLOPTION1 (Z16F_FLOPTION1_RESVD | Z16F_FLOPTION1_MCEN | \
+                           Z16F_FLOPTION1_OFFH | Z16F_FLOPTION1_OFFL)
+
+#  define BOARD_FLOPTION2 Z16F_FLOPTION2_RESVD
+
+#  define BOARD_FLOPTION3 (Z16F_FLOPTION3_RESVD | Z16F_FLOPTION3_NORMAL)
+
+/* The same settings, pre-digested for assembly language */
+
+#else
+#  define BOARD_FLOPTION0 %ff
+#  define BOARD_FLOPTION1 %ff
+#  define BOARD_FLOPTION2 %ff
+#  define BOARD_FLOPTION3 %7f
+#endif
+
+/* LEDs
+ *
+ * The 16z board has 7 LEDs, five of which are controllable via software:
+ *
+ *   ----- ------ ------ ------------------------------------
+ *   LED   Color  Signal Description
+ *   ----- ------ ------ ------------------------------------
+ *   LED1  Red     3V3   Indicates the presence of +3.3V
+ *   LED2  Red     5V    Indicates the presence of +5V
+
+ *   LED3  Blue    ~RF   Controlled via PH2.  Notes: 1, 2
+ *   LED4  Green   ~SXM  Controlled via PH3.  Notes: 1, 3
+ *   LED5  Green   ~SD1  Controlled via PJ0.  Notes: 1, 4
+ *   LED6  Yellow  ~SD2  Controlled via PJ4.  Notes: 1, 5
+ *   LED7  Yellow  ~SD0  Controlled via PJ7.  Notes: 1, 6
+ *   ----- ------ ------ ------------------------------------
+ *
+ *   Note 1:  Pulled high so a low output illuminates the LED.
+ *   Note 2:  PH2/~RF is also used by the RF transceiver, X2.  That part is not
+ *            populated on my board.
+ *   Note 3:  ~SXM is the chip select for the serial memory, U4.  That part is
+ *            not populated on my board.
+ *   Note 4:  ~SD1 is the chip select for the SD card 1, X11.
+ *   Note 5:  ~SD2 is the chip select for the SD card 2, X10.
+ *   Note 6:  ~SD0 is the chip select for the microSD 0, X12.
+ *
+ * In conclusion:  None of the LEDs are available to indicate software status
+ * without potentially sacrificing board functionality.  If the RF transceiver
+ * is not installed (CONFIG_16Z_RFTRANSCEIVER=n) and if LED support is
+ * requested (CONFIG_ARCH_LEDS), then LED3 will be used to indicate status:  A
+ * solid color means that the board has boot successfully; flashing at a rate
+ * of approximately 2Hz indicates a software failure.
+ */
+
+#define __LED3_BIT (1 << 0)
+#define __LED4_BIT (1 << 1)
+#undef  HAVE_16Z_LED3
+#undef  HAVE_16Z_LED4
+
+#if !defined(CONFIG_16Z_RFTRANSCEIVER)
+#  define __LEDPANIC __LED3_BIT
+#  define HAVE_16Z_LED3
+#elif !defined(CONFIG_16Z_SERIAL_MEMORY)
+#  define __LEDPANIC __LED4_BIT
+#  define HAVE_16Z_LED4
+#else
+#  define __LEDPANIC (0)
+#endif
+
+#if !defined(CONFIG_16Z_SERIAL_MEMORY) && !defined(HAVE_16Z_LED4)
+#  define __LEDSTARTED __LED4_BIT
+#  define HAVE_16Z_LED4
+#else
+#  define __LEDSTARTED __LEDPANIC
+#endif
+                                        /* LED3   LED4 */
+#define LED_STARTED       0             /* OFF    OFF  */
+#define LED_HEAPALLOCATE  0             /* N/C    N/C  */
+#define LED_IRQSENABLED   0             /* N/C    N/C  */
+#define LED_STACKCREATED  __LEDSTARTED  /* N/C    ON   */
+#define LED_INIRQ         0             /* N/C    N/C  */
+#define LED_SIGNAL        0             /* N/C    N/C  */
+#define LED_ASSERTION     0             /* N/C    N/C  */
+#define LED_PANIC         __LEDPANIC    /* ON     N/C  */
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif  /* __CONFIGS_16Z_INCLUDE_BOARD_H */
diff --git a/misc/Obsoleted/configs/16z/nsh/.gitignore b/misc/Obsoleted/configs/16z/nsh/.gitignore
new file mode 100644
index 000000000..fb6579652
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/nsh/.gitignore
@@ -0,0 +1,5 @@
+nsh.hex
+nsh.map
+nsh.lod
+nsh.wsp
+
diff --git a/misc/Obsoleted/configs/16z/nsh/Make.defs b/misc/Obsoleted/configs/16z/nsh/Make.defs
new file mode 100644
index 000000000..8405f00a8
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/nsh/Make.defs
@@ -0,0 +1,264 @@
+############################################################################
+# configs/16z/nsh/Make.defs
+#
+#   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include $(TOPDIR)/.config
+include $(TOPDIR)/tools/Config.mk
+
+# These are the directories where the ZDS-II toolchain is installed.  NOTE
+# that short 8.3 path names are used in order to avoid spaces.  On my machine
+# I have:
+#
+# C:\PROGRA~1\ = C:\Profram Files\
+# C:\PROGRA~2\ = C:\Program Files (x86)\
+#
+# Your PC may be configured differently.
+
+ZDSVERSION = 5.0.1
+
+ifeq ($(CONFIG_WINDOWS_NATIVE),y)
+  ZDSINSTALLDIR = C:/PROGRA~2/ZiLOG/ZDSII_ZNEO_$(ZDSVERSION)
+  INSTALLDIR = ${shell echo $(ZDSINSTALLDIR)| sed -e "s/\//\\/g"}
+  ZDSBINDIR = $(INSTALLDIR)\bin
+  ZDSSTDINCDIR = $(INSTALLDIR)\include\std
+  ZDSZILOGINCDIR = $(INSTALLDIR)\include\zilog
+  ZDSSTDLIBDIR = $(INSTALLDIR)\lib\std
+  ZDSZILOGLIBDIR = $(INSTALLDIR)\lib\zilog
+
+  # CFLAGs
+
+  ARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
+  EARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
+  ARCHSTDINCLUDES = -stdinc:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
+  ARCHUSRINCLUDES = -usrinc:.
+else
+  WINTOOL = y
+  ZDSINSTALLDIR = C:/PROGRA~2/ZiLOG/ZDSII_ZNEO_$(ZDSVERSION)
+  INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
+  ZDSBINDIR = $(INSTALLDIR)/bin
+  ZDSSTDINCDIR = $(INSTALLDIR)/include/std
+  ZDSZILOGINCDIR = $(INSTALLDIR)/include/zilog
+  ZDSSTDLIBDIR = $(INSTALLDIR)/lib/std
+  ZDSZILOGLIBDIR = $(INSTALLDIR)/lib/zilog
+
+  # These are the same directories but with the directory separator
+  # character swapped as needed by the ZDS-II compiler
+
+  WTOPDIR = ${shell cygpath -w "$(TOPDIR)"}
+  WZDSSTDINCDIR = ${shell cygpath -w "$(ZDSSTDINCDIR)"}
+  WZDSZILOGINCDIR = ${shell cygpath -w "$(ZDSZILOGINCDIR)"}
+  WZDSSTDLIBDIR = ${shell cygpath -w "$(ZDSSTDLIBDIR)"}
+  WZDSZILOGLIBDIR = ${shell cygpath -w "$(ZDSZILOGLIBDIR)"}
+
+  # Escaped versions
+
+  ETOPDIR = ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
+  EZDSSTDINCDIR = ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
+  EZDSZILOGINCDIR = ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}
+
+  # CFLAGs
+
+  ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
+  EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
+  ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
+  ARCHUSRINCLUDES = -usrinc:'.'
+endif
+
+# Assembler definitions
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHASMOPTIMIZATION = -debug
+else
+  ARCHASMOPTIMIZATION = -nodebug
+endif
+
+ARCHASMCPUFLAGS = -cpu:Z16F2811AL -NOigcase
+ARCHASMLIST = -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet
+ARCHASMWARNINGS = -warn
+ARCHASMDEFINES = -define:_Z16F2811AL=1 -define:_Z16K_SERIES=1 -define:_Z16F_SERIES=1 -define:__ASSEMBLY__
+AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)
+
+# Compiler definitions
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -debug
+else
+  ARCHOPTIMIZATION = -nodebug
+endif
+
+ifeq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += -NOregvar -reduceopt
+else
+  ARCHOPTIMIZATION += -regvar
+endif
+
+ARCHCPUFLAGS = -chartype:S -model:L -NOmodsect -cpu:Z16F2811AL -NOgenprint \
+               -asmsw:" $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)"
+ARCHLIST = -keeplst -NOlist -NOlistinc -NOkeepasm
+ARCHPICFLAGS =
+ARCHWARNINGS = -warn
+ARCHDEFINES = -define:_Z16F2811AL -define:_Z16K_SERIES -define:_Z16F_SERIES
+ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES)
+CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+
+CPPDEFINES = -D_Z16F2811AL -D_Z16K_SERIES -D_Z16F_SERIES -D__ASSEMBLY__
+CPPINCLUDES = -I$(TOPDIR)$(DELIM)include
+CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES)
+
+# Librarian definitions
+
+ARFLAGS = -quiet -warn
+
+# Linker definitions
+
+LINKCMDTEMPLATE = $(TOPDIR)$(DELIM)configs$(DELIM)16z$(DELIM)nsh$(DELIM)nsh.linkcmd
+
+# Tool names/pathes
+
+CROSSDEV =
+CC = zneocc.exe
+CPP = gcc -E
+LD = zneolink.exe
+AS = zneoasm.exe
+AR = zneolib.exe
+
+# File extensions
+
+ASMEXT = .asm
+OBJEXT = .obj
+LIBEXT = .lib
+EXEEXT = .hex
+
+# These are the macros that will be used in the NuttX make system
+# to compile and assembly source files and to insert the resulting
+# object files into an archive
+
+ifeq ($(CONFIG_WINDOWS_NATIVE),y)
+
+define PREPROCESS
+	@echo CPP: $1->$2
+	$(Q) "$(CPP)" $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	$(Q) "$(CC)" $(CFLAGS)  ${shell echo $1 | sed -e "s/\//\\/g"}
+endef
+
+define ASSEMBLE
+	$(Q) "$(AS)" $(AFLAGS) ${shell echo $1 | sed -e "s/\//\\/g"}
+endef
+
+define MOVEOBJ
+	$(call MOVEFILE, "$1.obj", "$2$(DELIM)$1.obj")
+	$(call MOVEFILE, "$1.lst", "$2$(DELIM)$1.lst")
+	@#$(call MOVEFILE, "$1.src", "$2$(DELIM)$1.src")
+endef
+
+define ARCHIVE
+	@echo AR: $2
+	$(Q) for %%G in ($(2)) do ( "$(AR)" $(ARFLAGS) $1=-+%%G )
+endef
+
+define CLEAN
+	$(Q) if exist *.obj (del /f /q *.obj)
+	$(Q) if exist *.src (del /f /q *.src)
+	$(Q) if exist *.lib (del /f /q *.lib)
+	$(Q) if exist *.hex (del /f /q *.hex)
+	$(Q) if exist *.lod (del /f /q *.lod)
+	$(Q) if exist *.lst (del /f /q *.lst)
+endef
+
+else
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	$(Q) "$(CPP)" $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	$(Q) (wfile=`cygpath -w "$1"`; "$(CC)" $(CFLAGS) $$wfile)
+endef
+
+define ASSEMBLE
+	$(Q) (wfile=`cygpath -w "$1"`; "$(AS)" $(AFLAGS) $$wfile)
+endef
+
+define MOVEOBJ
+	$(call MOVEFILE, "$1.obj", "$2$(DELIM)$1.obj")
+	$(call MOVEFILE, "$1.lst", "$2$(DELIM)$1.lst")
+	@#$(call MOVEFILE, "$1.src", "$2$(DELIM)$1.src")
+endef
+
+define ARCHIVE
+	$(Q) for __obj in $(2) ; do \
+		echo "AR: $$__obj"; \
+		"$(AR)" $(ARFLAGS) $1=-+$$__obj || { echo "$(AR) $1=-+$$__obj FAILED!" ; exit 1 ; } \
+	done
+endef
+
+define CLEAN
+	$(Q) rm -f *.obj *.src *.lib *.hex *.lod *.lst
+endef
+endif
+
+# Windows native host tool definitions
+
+ifeq ($(CONFIG_WINDOWS_NATIVE),y)
+  HOSTCC = mingw32-gcc.exe
+  HOSTINCLUDES = -I.
+  HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+  HOSTLDFLAGS =
+  HOSTEXEEXT = .exe
+
+  # Windows-native host tools
+
+  MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative
+else
+
+# Linux/Cygwin host tool definitions
+
+  HOSTCC = gcc
+  HOSTINCLUDES = -I.
+  HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+  HOSTLDFLAGS =
+
+  # This is the tool to use for dependencies (i.e., none)
+
+  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
+
+  # ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies
+
+  DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
+  DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
+endif
diff --git a/misc/Obsoleted/configs/16z/nsh/README.txt b/misc/Obsoleted/configs/16z/nsh/README.txt
new file mode 100644
index 000000000..b772f43a9
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/nsh/README.txt
@@ -0,0 +1,50 @@
+README.txt
+==========
+
+Contents
+--------
+
+  o NSH Project
+  o Loading and Executing Code
+  o Console Output
+  o STATUS
+
+NSH Project
+-----------
+
+nsh.zfpproj is a simple ZDS II - ZNEO 5.0.1 project that will allow you
+  to use the ZDS-II debugger.  Before using, copy the following files from
+  the toplevel directory:
+
+    nuttx.hex, nuttx.map, nuttx.lod
+
+  to this directory as:
+
+    nsh.hex, nsh.map, nsh.lod
+
+Loading and Executing Code
+--------------------------
+
+1. Copy the files to this directory as described above
+2. Connect the ZiLOG XTools USB debugger.
+3. Install the USB driver from the ZDS-II device_drivers directory
+4. Start ZDS-II and load the nsh.zfpproj project
+5. In the debug tab, connect to the debugger
+6. In the debug tab, load code, reset, and go
+
+Console Output
+--------------
+
+Interaction with NSH is via the serial console at 57600 8N1 baud.
+
+STATUS
+------
+1. Note that you must apply the ZNEO patch if you are using ZDS-II 5.0.1.
+   See the README.txt file in the parent directory for more information.
+
+2. This configuration does not run correctly.  There is currently a problem
+   with the SRAM accesses.
+
+3. I bet that this code, like ostest, will not run if started by a hardware
+   reset.  It may only run when started via the debugger.
+
diff --git a/misc/Obsoleted/configs/16z/nsh/defconfig b/misc/Obsoleted/configs/16z/nsh/defconfig
new file mode 100644
index 000000000..a0792541e
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/nsh/defconfig
@@ -0,0 +1,747 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+# CONFIG_UBOOT_UIMAGE is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+CONFIG_DEBUG=y
+# CONFIG_ARCH_HAVE_STACKCHECK is not set
+# CONFIG_ARCH_HAVE_HEAPCHECK is not set
+# CONFIG_DEBUG_VERBOSE is not set
+
+#
+# Subsystem Debug Options
+#
+# CONFIG_DEBUG_MM is not set
+# CONFIG_DEBUG_SCHED is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_LIB is not set
+# CONFIG_DEBUG_BINFMT is not set
+# CONFIG_DEBUG_GRAPHICS is not set
+# CONFIG_DEBUG_IRQ is not set
+
+#
+# Driver Debug Options
+#
+# CONFIG_DEBUG_LEDS is not set
+# CONFIG_DEBUG_ANALOG is not set
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_AUDIO is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+# CONFIG_ARCH_HAVE_CUSTOMOPT is not set
+# CONFIG_DEBUG_NOOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_ARM is not set
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+CONFIG_ARCH_Z16=y
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="z16"
+CONFIG_ARCH_CHIP="z16f"
+
+#
+# Z16 Configuration Options
+#
+# CONFIG_ARCH_CHIP_Z16F2810 is not set
+CONFIG_ARCH_CHIP_Z16F2811=y
+# CONFIG_ARCH_CHIP_Z16F3211 is not set
+# CONFIG_ARCH_CHIP_Z16F6411 is not set
+CONFIG_ARCH_CHIP_Z16F=y
+
+#
+# Common Configuration Options
+#
+
+#
+# Z16F Configuration Options
+#
+
+#
+# Z16F Peripheral Selection
+#
+# CONFIG_Z16F_ESPI is not set
+CONFIG_Z16F_UART0=y
+# CONFIG_Z16F_UART1 is not set
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_ADDRENV is not set
+# CONFIG_ARCH_HAVE_VFORK is not set
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_IRQPRIO is not set
+# CONFIG_ARCH_STACKDUMP is not set
+CONFIG_ENDIAN_BIG=y
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+# CONFIG_ARCH_HAVE_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=2811
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+# CONFIG_ARCH_HAVE_INTERRUPTSTACK is not set
+# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x0
+CONFIG_RAM_SIZE=65536
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_16Z=y
+# CONFIG_ARCH_BOARD_Z16F2800100ZCOG is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="16z"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Clocks and Timers
+#
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2014
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=16
+CONFIG_WDOG_INTRESERVE=2
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Tasks and Scheduling
+#
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_RR_INTERVAL=200
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_MAX_TASKS=16
+# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_SCHED_WAITPID=y
+
+#
+# Pthread Options
+#
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_NPTHREAD_KEYS=4
+
+#
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+# CONFIG_PRIORITY_INHERITANCE is not set
+
+#
+# RTOS hooks
+#
+# CONFIG_BOARD_INITIALIZE is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# POSIX Message Queue Options
+#
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=1536
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+# CONFIG_ARCH_HAVE_I2CRESET is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_TIMER is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+CONFIG_ARCH_HAVE_UART0=y
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+# CONFIG_ARCH_HAVE_USART2 is not set
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+# CONFIG_SERIAL_TIOCSERGSTRUCT is not set
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# UART0 Configuration
+#
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART0_BAUD=57600
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
+# CONFIG_UART0_IFLOWCONTROL is not set
+# CONFIG_UART0_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_HAVE_HEAP2=y
+CONFIG_HEAP2_BASE=0x00000000
+CONFIG_HEAP2_SIZE=0
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+CONFIG_NOPRINTF_FIELDWIDTH=y
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CPUHOG is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERIALBLASTER is not set
+# CONFIG_EXAMPLES_SERIALRX is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=80
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_CMDPARMS is not set
+CONFIG_NSH_MAXARGUMENTS=6
+# CONFIG_NSH_ARGCAT is not set
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_ALTCONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# USB Monitor
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/misc/Obsoleted/configs/16z/nsh/nsh.linkcmd b/misc/Obsoleted/configs/16z/nsh/nsh.linkcmd
new file mode 100755
index 000000000..efa76b4f0
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/nsh/nsh.linkcmd
@@ -0,0 +1,92 @@
+/****************************************************************************/
+/* configs/16z/nsh/nsh.linkcmd                                              */
+/*                                                                          */
+/*   Copyright (C) 2014 Gregory Nutt. All rights reserved.                  */
+/*   Author: Gregory Nutt <gnutt@nuttx.org>                                 */
+/*                                                                          */
+/* Redistribution and use in source and binary forms, with or without       */
+/* modification, are permitted provided that the following conditions       */
+/* are met:                                                                 */
+/*                                                                          */
+/* 1. Redistributions of source code must retain the above copyright        */
+/*    notice, this list of conditions and the following disclaimer.         */
+/* 2. Redistributions in binary form must reproduce the above copyright     */
+/*    notice, this list of conditions and the following disclaimer in       */
+/*    the documentation and/or other materials provided with the            */
+/*    distribution.                                                         */
+/* 3. Neither the name NuttX nor the names of its contributors may be       */
+/*    used to endorse or promote products derived from this software        */
+/*    without specific prior written permission.                            */
+/*                                                                          */
+/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS      */
+/* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT        */
+/* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS        */
+/* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE           */
+/* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,     */
+/* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS    */
+/* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED       */
+/* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT              */
+/* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN        */
+/* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE          */
+/* POSSIBILITY OF SUCH DAMAGE.                                              */
+/*                                                                          */
+/****************************************************************************/
+
+-FORMAT=OMF695,INTEL32
+-map -maxhexlen=64 -quiet -sort NAME=ascending -unresolved=fatal
+-warnoverlap -NOxref -warn -debug -NOigcase
+
+RANGE ROM    $000000 : $007FFF
+RANGE RAM    $FFB000 : $FFBFFF
+RANGE IODATA $FFC000 : $FFFFFF
+RANGE EROM   $008000 : $01FFFF
+RANGE ERAM   $020000 : $EFFFFF
+
+CHANGE NEAR_TEXT=NEAR_DATA
+CHANGE FAR_TEXT=FAR_DATA
+
+ORDER FAR_BSS,  FAR_DATA
+ORDER NEAR_BSS, NEAR_DATA
+COPY  NEAR_DATA EROM
+COPY  FAR_DATA  EROM
+
+define _0_exit             = 0
+define _low_near_romdata   = copy base of NEAR_DATA
+define _low_neardata       = base of NEAR_DATA
+define _len_neardata       = length of NEAR_DATA
+define _low_far_romdata    = copy base of FAR_DATA
+define _low_fardata        = base of FAR_DATA
+define _len_fardata        = length of FAR_DATA
+define _low_nearbss        = base of NEAR_BSS
+define _len_nearbss        = length of NEAR_BSS
+define _low_farbss         = base of FAR_BSS
+define _len_farbss         = length of FAR_BSS
+define _near_heaptop       = highaddr of RAM
+define _far_heaptop        = highaddr of ERAM
+define _far_stack          = highaddr of ERAM
+define _near_stack         = highaddr of RAM
+define _near_heapbot       = top of RAM
+define _far_heapbot        = top of ERAM
+
+define _SYS_CLK_SRC        = 1
+define _SYS_CLK_FREQ       = 18432000
+
+define __EXTCT_INIT_PARAM  = $40
+define __EXTCS0_INIT_PARAM = $9001
+define __EXTCS1_INIT_PARAM = $9001
+define __EXTCS2_INIT_PARAM = $9011
+define __EXTCS3_INIT_PARAM = $9015
+define __EXTCS4_INIT_PARAM = $9015
+define __EXTCS5_INIT_PARAM = $9015
+
+define __PFAF_INIT_PARAM   = $ff
+define __PGAF_INIT_PARAM   = $ff
+define __PDAF_INIT_PARAM   = $ff00
+define __PAAF_INIT_PARAM   = $0000
+define __PCAF_INIT_PARAM   = $0000
+define __PHAF_INIT_PARAM   = $0300
+define __PKAF_INIT_PARAM   = $0f
+
+/* arch/z16/src/Makefile will append target, object and library paths below */
+
diff --git a/misc/Obsoleted/configs/16z/nsh/nsh.zfpproj b/misc/Obsoleted/configs/16z/nsh/nsh.zfpproj
new file mode 100644
index 000000000..b889c9582
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/nsh/nsh.zfpproj
@@ -0,0 +1,238 @@
+<project type="Standard" project-type="Standard" configuration="Debug" created-by="{{build_number}}" modified-by="d:5.0.0:11071102" ZDSII="ZDS - ZNEO 5.0.1 (Build 11071201)">

+<cpu>Z16F2811AL</cpu>

+

+<!-- file information -->

+<files>

+<file filter-key="flash">..\..\..\nuttx.hex</file>

+</files>

+

+<!-- configuration information -->

+<configurations>

+<configuration name="Debug" >

+<tools>

+<tool name="Assembler">

+<options>

+<option name="define" type="string" change-action="assemble">_Z16F2811AL=1,_Z16F_SERIES=1</option>

+<option name="include" type="string" change-action="assemble"></option>

+<option name="list" type="boolean" change-action="none">true</option>

+<option name="listmac" type="boolean" change-action="none">false</option>

+<option name="name" type="boolean" change-action="none">true</option>

+<option name="pagelen" type="integer" change-action="none">56</option>

+<option name="pagewidth" type="integer" change-action="none">80</option>

+<option name="quiet" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="Compiler">

+<options>

+<option name="chartype" type="string" change-action="compile">U</option>

+<option name="define" type="string" change-action="compile">_Z16F2811AL,_Z16F_SERIES</option>

+<option name="genprintf" type="boolean" change-action="compile">true</option>

+<option name="keepasm" type="boolean" change-action="none">false</option>

+<option name="keeplst" type="boolean" change-action="none">false</option>

+<option name="list" type="boolean" change-action="none">false</option>

+<option name="listinc" type="boolean" change-action="none">false</option>

+<option name="model" type="string" change-action="compile">S</option>

+<option name="modsect" type="boolean" change-action="compile">false</option>

+<option name="stdinc" type="string" change-action="compile"></option>

+<option name="usrinc" type="string" change-action="compile"></option>

+<option name="regvar" type="boolean" change-action="compile">true</option>

+<option name="regvarcache" type="boolean" change-action="none">false</option>

+<option name="reduceopt" type="boolean" change-action="compile">false</option>

+<option name="watch" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Debugger">

+<options>

+<option name="target" type="string" change-action="rebuild">Z16F2800100ZCOG</option>

+<option name="debugtool" type="string" change-action="none">USBSmartCable</option>

+<option name="usepageerase" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="FlashProgrammer">

+<options>

+<option name="erasebeforeburn" type="boolean" change-action="none">false</option>

+<option name="eraseinfopage" type="boolean" change-action="none">false</option>

+<option name="enableinfopage" type="boolean" change-action="none">false</option>

+<option name="includeserial" type="boolean" change-action="none">false</option>

+<option name="offset" type="integer" change-action="none">0</option>

+<option name="snenable" type="boolean" change-action="none">true</option>

+<option name="sn" type="string" change-action="none">000000000000000000000000</option>

+<option name="snsize" type="integer" change-action="none">1</option>

+<option name="snstep" type="integer" change-action="none">000000000000000000000001</option>

+<option name="snstepformat" type="integer" change-action="none">0</option>

+<option name="snaddress" type="string" change-action="none">0</option>

+<option name="snformat" type="integer" change-action="none">0</option>

+<option name="snbigendian" type="boolean" change-action="none">true</option>

+<option name="singleval" type="string" change-action="none">0</option>

+<option name="singlevalformat" type="integer" change-action="none">0</option>

+<option name="usepageerase" type="boolean" change-action="none">false</option>

+<option name="autoselect" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="General">

+<options>

+<option name="warn" type="boolean" change-action="none">true</option>

+<option name="debug" type="boolean" change-action="assemble">true</option>

+<option name="debugcache" type="boolean" change-action="none">true</option>

+<option name="igcase" type="boolean" change-action="assemble">false</option>

+<option name="outputdir" type="string" change-action="compile">.</option>

+</options>

+</tool>

+<tool name="Librarian">

+<options>

+<option name="outfile" type="string" change-action="build"></option>

+<option name="warn" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Linker">

+<options>

+<option name="directives" type="string" change-action="build"></option>

+<option name="createnew" type="boolean" change-action="build">false</option>

+<option name="eram" type="string" change-action="build">0-0</option>

+<option name="erom" type="string" change-action="build">0-0</option>

+<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>

+<option name="fplib" type="string" change-action="build">Dummy</option>

+<option name="iodata" type="string" change-action="build">0-0</option>

+<option name="linkctlfile" type="string" change-action="build"></option>

+<option name="map" type="boolean" change-action="none">true</option>

+<option name="maxhexlen" type="integer" change-action="build">64</option>

+<option name="objlibmods" type="string" change-action="build"></option>

+<option name="of" type="string" change-action="build">.\nsh</option>

+<option name="padhex" type="boolean" change-action="build">false</option>

+<option name="quiet" type="boolean" change-action="none">false</option>

+<option name="ram" type="string" change-action="build">FFB000-FFBFFF</option>

+<option name="relist" type="boolean" change-action="build">false</option>

+<option name="rom" type="string" change-action="build">000000-007FFF</option>

+<option name="sort" type="string" change-action="none">name</option>

+<option name="startuplnkcmds" type="boolean" change-action="build">true</option>

+<option name="startuptype" type="string" change-action="build">1</option>

+<option name="undefisfatal" type="boolean" change-action="none">true</option>

+<option name="useadddirectives" type="boolean" change-action="build">false</option>

+<option name="usecrun" type="boolean" change-action="build">true</option>

+<option name="warnoverlap" type="boolean" change-action="none">false</option>

+<option name="warnisfatal" type="boolean" change-action="none">false</option>

+<option name="xref" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+</tools>

+</configuration>

+<configuration name="Release" >

+<tools>

+<tool name="Assembler">

+<options>

+<option name="define" type="string" change-action="assemble">_Z16F2811AL=1,_Z16F_SERIES=1</option>

+<option name="include" type="string" change-action="assemble"></option>

+<option name="list" type="boolean" change-action="none">true</option>

+<option name="listmac" type="boolean" change-action="none">false</option>

+<option name="name" type="boolean" change-action="none">true</option>

+<option name="pagelen" type="integer" change-action="none">56</option>

+<option name="pagewidth" type="integer" change-action="none">80</option>

+<option name="quiet" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="Compiler">

+<options>

+<option name="chartype" type="string" change-action="compile">U</option>

+<option name="define" type="string" change-action="compile">_Z16F2811AL,_Z16F_SERIES</option>

+<option name="genprintf" type="boolean" change-action="compile">true</option>

+<option name="keepasm" type="boolean" change-action="none">false</option>

+<option name="keeplst" type="boolean" change-action="none">false</option>

+<option name="list" type="boolean" change-action="none">false</option>

+<option name="listinc" type="boolean" change-action="none">false</option>

+<option name="model" type="string" change-action="compile">S</option>

+<option name="modsect" type="boolean" change-action="compile">false</option>

+<option name="stdinc" type="string" change-action="compile"></option>

+<option name="usrinc" type="string" change-action="compile"></option>

+<option name="regvar" type="boolean" change-action="compile">true</option>

+<option name="regvarcache" type="boolean" change-action="none">false</option>

+<option name="reduceopt" type="boolean" change-action="compile">false</option>

+<option name="watch" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Debugger">

+<options>

+<option name="target" type="string" change-action="rebuild"></option>

+<option name="debugtool" type="string" change-action="none">ZPAKII</option>

+<option name="usepageerase" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="FlashProgrammer">

+<options>

+<option name="erasebeforeburn" type="boolean" change-action="none">false</option>

+<option name="eraseinfopage" type="boolean" change-action="none">false</option>

+<option name="enableinfopage" type="boolean" change-action="none">false</option>

+<option name="includeserial" type="boolean" change-action="none">false</option>

+<option name="offset" type="integer" change-action="none">0</option>

+<option name="snenable" type="boolean" change-action="none">false</option>

+<option name="sn" type="string" change-action="none">0</option>

+<option name="snsize" type="integer" change-action="none">0</option>

+<option name="snstep" type="integer" change-action="none">1</option>

+<option name="snstepformat" type="integer" change-action="none">0</option>

+<option name="snaddress" type="string" change-action="none">0</option>

+<option name="snformat" type="integer" change-action="none">0</option>

+<option name="snbigendian" type="boolean" change-action="none">true</option>

+<option name="singleval" type="string" change-action="none">0</option>

+<option name="singlevalformat" type="integer" change-action="none">0</option>

+<option name="usepageerase" type="boolean" change-action="none">false</option>

+<option name="autoselect" type="boolean" change-action="none">true</option>

+</options>

+</tool>

+<tool name="General">

+<options>

+<option name="warn" type="boolean" change-action="none">true</option>

+<option name="debug" type="boolean" change-action="assemble">false</option>

+<option name="debugcache" type="boolean" change-action="none">true</option>

+<option name="igcase" type="boolean" change-action="assemble">false</option>

+<option name="outputdir" type="string" change-action="compile">.</option>

+</options>

+</tool>

+<tool name="Librarian">

+<options>

+<option name="outfile" type="string" change-action="build"></option>

+<option name="warn" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+<tool name="Linker">

+<options>

+<option name="directives" type="string" change-action="build"></option>

+<option name="createnew" type="boolean" change-action="build">false</option>

+<option name="eram" type="string" change-action="build">0-0</option>

+<option name="erom" type="string" change-action="build">0-0</option>

+<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>

+<option name="fplib" type="string" change-action="build">Dummy</option>

+<option name="iodata" type="string" change-action="build">0-0</option>

+<option name="linkctlfile" type="string" change-action="build"></option>

+<option name="map" type="boolean" change-action="none">true</option>

+<option name="maxhexlen" type="integer" change-action="build">64</option>

+<option name="objlibmods" type="string" change-action="build"></option>

+<option name="of" type="string" change-action="build">.\nsh</option>

+<option name="padhex" type="boolean" change-action="build">false</option>

+<option name="quiet" type="boolean" change-action="none">false</option>

+<option name="ram" type="string" change-action="build">FFB000-FFBFFF</option>

+<option name="relist" type="boolean" change-action="build">false</option>

+<option name="rom" type="string" change-action="build">000000-007FFF</option>

+<option name="sort" type="string" change-action="none">name</option>

+<option name="startuplnkcmds" type="boolean" change-action="build">true</option>

+<option name="startuptype" type="string" change-action="build">1</option>

+<option name="undefisfatal" type="boolean" change-action="none">true</option>

+<option name="useadddirectives" type="boolean" change-action="build">false</option>

+<option name="usecrun" type="boolean" change-action="build">true</option>

+<option name="warnoverlap" type="boolean" change-action="none">false</option>

+<option name="warnisfatal" type="boolean" change-action="none">false</option>

+<option name="xref" type="boolean" change-action="none">false</option>

+</options>

+</tool>

+</tools>

+</configuration>

+</configurations>

+

+<!-- watch information -->

+<watch-elements>

+<watch-element expression="0x801d1a" />

+</watch-elements>

+

+<!-- breakpoint information -->

+<breakpoints>

+</breakpoints>

+

+</project>
\ No newline at end of file
diff --git a/misc/Obsoleted/configs/16z/nsh/setenv.sh b/misc/Obsoleted/configs/16z/nsh/setenv.sh
new file mode 100755
index 000000000..462be15d6
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/nsh/setenv.sh
@@ -0,0 +1,70 @@
+#!/bin/bash
+# configs/16z/nsh/setenv.sh
+#
+#   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# Check how we were executed
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+#
+# This is the Cygwin path to location where the ZDS-II tools were installed
+#
+TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/ZiLOG/ZDSII_ZNEO_5.0.1/bin"
+
+#
+# This is the path to the 16z tool directory
+#
+TOOL_DIR="${WD}/configs/16z/tools"
+
+#
+# Add the path to the toolchain and tool directory to the PATH variable.  NOTE
+# that /bin and /usr/bin preceded the toolchain bin directory.  This is because
+# the ZDSII bin directory includes binaries like make.exe that will interfere
+# with the normal build process if we do not give priority to the versions at
+# /bin and /usr/bin.
+#
+export PATH="/bin:/usr/bin:${TOOLCHAIN_BIN}:${TOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
+echo "PATH : ${PATH}"
diff --git a/misc/Obsoleted/configs/16z/scripts/setenv.bat b/misc/Obsoleted/configs/16z/scripts/setenv.bat
new file mode 100644
index 000000000..4db1dbba8
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/scripts/setenv.bat
@@ -0,0 +1,50 @@
+@echo off
+
+rem configs/16z/scripts/setenv.bat
+rem
+rem   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+rem   Author: Gregory Nutt <gnutt@nuttx.org>
+rem
+rem Redistribution and use in source and binary forms, with or without
+rem modification, are permitted provided that the following conditions
+rem are met:
+rem
+rem 1. Redistributions of source code must retain the above copyright
+rem    notice, this list of conditions and the following disclaimer.
+rem 2. Redistributions in binary form must reproduce the above copyright
+rem    notice, this list of conditions and the following disclaimer in
+rem    the documentation and/or other materials provided with the
+rem    distribution.
+rem 3. Neither the name NuttX nor the names of its contributors may be
+rem    used to endorse or promote products derived from this software
+rem    without specific prior written permission.
+rem
+rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+rem POSSIBILITY OF SUCH DAMAGE.
+
+rem This is the location where I installed in the MinGW compiler. With
+rem this configuration, it is recommended that you do NOT install the
+rem MSYS tools; they conflict with the GNUWin32 tools.  See
+rem http://www.mingw.org/ for further info.
+
+set PATH=C:\MinGW\bin;%PATH%
+
+rem This is the location where I installed the ZDS-II toolchain.
+
+set PATH=C:\Program Files (x86)\ZiLOG\ZDSII_ZNEO_5.0.1\bin;%PATH%
+
+rem This is the location where I installed the GNUWin32 tools.  See
+rem http://gnuwin32.sourceforge.net/.
+
+set PATH=C:\gnuwin32\bin;%PATH%
+echo %PATH%
diff --git a/misc/Obsoleted/configs/16z/src/.gitignore b/misc/Obsoleted/configs/16z/src/.gitignore
new file mode 100644
index 000000000..b268f1933
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/src/.gitignore
@@ -0,0 +1,4 @@
+/Make.dep
+/.depend
+/*.obj
+
diff --git a/misc/Obsoleted/configs/16z/src/Makefile b/misc/Obsoleted/configs/16z/src/Makefile
new file mode 100644
index 000000000..1632c6f88
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/src/Makefile
@@ -0,0 +1,90 @@
+############################################################################
+# configs/16z/Makefile
+#
+#   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+SCHEDSRCDIR = $(TOPDIR)$(DELIM)sched
+ARCHSRCDIR = $(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src
+
+ifeq ($(CONFIG_WINDOWS_NATIVE),y)
+  USRINCLUDES = -usrinc:".;$(SCHEDSRCDIR);$(ARCHSRCDIR);$(ARCHSRCDIR)\common"
+else
+  WSCHEDSRCDIR = ${shell cygpath -w $(SCHEDSRCDIR)}
+  WARCHSRCDIR = ${shell cygpath -w $(ARCHSRCDIR)}
+  USRINCLUDES = -usrinc:'.;$(WSCHEDSRCDIR);$(WARCHSRCDIR);$(WARCHSRCDIR)\common'
+endif
+
+INCLUDES = $(ARCHSTDINCLUDES) $(USRINCLUDES)
+CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(INCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) $(EXTRADEFINES)
+
+ASRCS =
+AOBJS = $(ASRCS:.S=$(OBJEXT))
+CSRCS = z16f_lowinit.c z16f_leds.c
+COBJS = $(CSRCS:.c=$(OBJEXT))
+
+SRCS = $(ASRCS) $(CSRCS)
+OBJS = $(AOBJS) $(COBJS)
+
+all: libboard$(LIBEXT)
+
+$(ASRCS) $(HEAD_ASRC): %$(ASMEXT): %.S
+	$(Q) $(CPP) $(CPPFLAGS) $< -o $@.tmp
+	$(Q) cat $@.tmp | sed -e "s/^#/;/g" > $@
+	$(Q) rm $@.tmp
+
+$(AOBJS): %$(OBJEXT): %$(ASMEXT)
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	$(Q) $(MKDEP) "$(CC)" -- $(CFLAGS) -- $(SRCS) >Make.dep
+	$(Q) touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
diff --git a/misc/Obsoleted/configs/16z/src/z16f_leds.c b/misc/Obsoleted/configs/16z/src/z16f_leds.c
new file mode 100644
index 000000000..483ec1662
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/src/z16f_leds.c
@@ -0,0 +1,175 @@
+/****************************************************************************
+ * configs/16z/z16f_leds.c
+ *
+ *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* LEDs
+ *
+ * The 16z board has 7 LEDs, five of which are controllable via software:
+ *
+ *   ----- ------ ------ ------------------------------------
+ *   LED   Color  Signal Description
+ *   ----- ------ ------ ------------------------------------
+ *   LED1  Red     3V3   Indicates the presence of +3.3V
+ *   LED2  Red     5V    Indicates the presence of +5V
+
+ *   LED3  Blue    ~RF   Controlled via PH2.  Notes: 1, 2
+ *   LED4  Green   ~SXM  Controlled via PH3.  Notes: 1, 3
+ *   LED5  Green   ~SD1  Controlled via PJ0.  Notes: 1, 4
+ *   LED6  Yellow  ~SD2  Controlled via PJ4.  Notes: 1, 5
+ *   LED7  Yellow  ~SD0  Controlled via PJ7.  Notes: 1, 6
+ *   ----- ------ ------ ------------------------------------
+ *
+ *   Note 1:  Pulled high so a low output illuminates the LED.
+ *   Note 2:  PH2/~RF is also used by the RF transceiver, X2.  That part is not
+ *            populated on my board.
+ *   Note 3:  ~SXM is the chip select for the serial memory, U4.  That part is
+ *            not populated on my board.
+ *   Note 4:  ~SD1 is the chip select for the SD card 1, X11.
+ *   Note 5:  ~SD2 is the chip select for the SD card 2, X10.
+ *   Note 6:  ~SD0 is the chip select for the microSD 0, X12.
+ *
+ * In conclusion:  None of the LEDs are available to indicate software status
+ * without potentially sacrificing board functionality.  If the RF transceiver
+ * is not installed (CONFIG_16Z_RFTRANSCEIVER=n) and if LED support is
+ * requested (CONFIG_ARCH_LEDS), then LED3 will be used to indicate status:  A
+ * solid color means that the board has boot successfully; flashing at a rate
+ * of approximately 2Hz indicates a software failure.
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <arch/board/board.h>
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_led_initialize
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_LEDS
+void board_led_initialize(void)
+{
+  /* All GPIO initialization is done in up_lowinit() */
+}
+
+/****************************************************************************
+ * Name: board_led_on
+ ****************************************************************************/
+
+void board_led_on(int led)
+{
+#if defined(HAVE_16Z_LED3) || defined(HAVE_16Z_LED4)
+  /* The following operations must be atomic */
+
+  irqstate_t  flags = irqsave();
+  uint8_t regval = getreg8(Z16F_GPIOH_OUT);
+
+#ifdef HAVE_16Z_LED3
+  /* LED3 is available at PH2 and illuminated by a low output */
+
+  if ((led & __LED3_BIT) != 0)
+    {
+      regval &= ~(1 << 2);
+    }
+#endif
+
+#ifdef HAVE_16Z_LED4
+  /* LED4 is available at PH3 and illuminated by a low output */
+
+  if ((led & __LED4_BIT) != 0)
+    {
+      regval &= ~(1 << 3);
+    }
+#endif
+
+  putreg8(regval, Z16F_GPIOH_OUT);
+  irqrestore(flags);
+#endif
+}
+
+/****************************************************************************
+ * Name: board_led_off
+ ****************************************************************************/
+
+void board_led_off(int led)
+{
+#if defined(HAVE_16Z_LED3) || defined(HAVE_16Z_LED4)
+  /* The following operations must be atomic */
+
+  irqstate_t  flags = irqsave();
+  uint8_t regval = getreg8(Z16F_GPIOH_OUT);
+
+#ifdef HAVE_16Z_LED3
+  /* LED3 is available at PH2 and illuminated by a low output */
+
+  if ((led & __LED3_BIT) != 0)
+    {
+      regval |= (1 << 2);
+    }
+#endif
+
+#ifdef HAVE_16Z_LED4
+  /* LED4 is available at PH3 and illuminated by a low output */
+
+  if ((led & __LED4_BIT) != 0)
+    {
+      regval |= (1 << 3);
+    }
+#endif
+
+  putreg8(regval, Z16F_GPIOH_OUT);
+  irqrestore(flags);
+#endif
+}
+
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/misc/Obsoleted/configs/16z/src/z16f_lowinit.c b/misc/Obsoleted/configs/16z/src/z16f_lowinit.c
new file mode 100644
index 000000000..a91980118
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/src/z16f_lowinit.c
@@ -0,0 +1,300 @@
+/***************************************************************************
+ * configs/16z/src/z16f_lowinit.c
+ *
+ *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Based upon sample code included with the Zilog ZDS-II toolchain.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ***************************************************************************/
+
+/***************************************************************************
+ * Included Files
+ ***************************************************************************/
+
+#include <nuttx/config.h>
+
+#include "chip/chip.h"
+
+/***************************************************************************
+ * Pre-processor Definitions
+ ***************************************************************************/
+
+/***************************************************************************
+ * Private Functions
+ ***************************************************************************/
+
+/***************************************************************************
+ * Name: z16f_extcsinit
+ ***************************************************************************/
+
+static void z16f_extcsinit(void)
+{
+  /* CS0 enabled, Data [0:7]
+   * Post Read: No wait states; Chip select: 1 wait state
+   */
+
+  putreg16(0x9001, Z16F_EXTCS0);
+
+  /* CS1 enabled, Data [0:7]
+   * Post Read: No wait states; Chip select: 1 wait state
+   */
+
+  putreg16(0x9001, Z16F_EXTCS1);
+
+  /* CS2 enabled, Data [0:7]
+   * Post Read: 1 wait state; Chip select: 1 wait state
+   */
+
+  putreg16(0x9011, Z16F_EXTCS2);
+
+  /* CS3 enabled, Data [0:7]
+   * Post Read: 1 wait state; Chip select: 5 wait states
+   */
+
+  putreg16(0x9015, Z16F_EXTCS3);
+
+  /* CS4 enabled, Data [0:7]
+   * Post Read: 1 wait state; Chip select: 5 wait states
+   */
+
+  putreg16(0x9015, Z16F_EXTCS4);
+
+  /* CS5 enabled, Data [0:7]
+   * Post Read: 1 wait state; Chip select: 5 wait states
+   */
+
+  putreg16(0x9015, Z16F_EXTCS5);
+
+  /* Enable the 8-bit external bus interface */
+
+  putreg8(0x40, Z16F_EXTCT);
+}
+
+/***************************************************************************
+ * Name: z16f_gpioinit
+ *
+ * Description:
+ *   Configure board-specific GPIO usage here.  Driver pin configurations
+ *   are set in the associated device drivers (such as UART, SPI, I2C,
+ *   etc.) and must be preserved.
+ *
+ ***************************************************************************/
+
+static void z16f_gpioinit(void)
+{
+  /* NOTE:  Here we assume that all ports are in the default reset state */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PA0/T0IN/T0OUT/DMA0REQ      GP8    PS/2 / GPIO, Expansion slots
+   * PA1/T0OUT/DMA0ACK           GP9    PS/2 / GPIO, Expansion slots
+   * PA2/DE0/FAULTY              ~INTI  Power section, RF transceiver (1)
+   * PA3/CTS0/FAULT0             ~INTX  Expansion slots
+   * PA4/RXD0/CS1                RXD    MAX3232D RS-232
+   * PA5/TXD0/CS2                TXD    MAX3232D RS-232
+   * PA6/SCL/CS3                 SCL    RTC / UID, Expansion slots
+   * PA7/SDA/CS4                 SDA    RTC / UID, Expansion slots
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0x9f, Z16F_GPIOA_DD);  /* Inputs: GP8, GP9, ~INTI, ~INTX, RXD, and SDA */
+  putreg8(0x03, Z16F_GPIOA_HDE); /* High drive current: GP8 and GP9 */
+  putreg8(0xf0, Z16F_GPIOA_AFL); /* RXD=Alt 1, TXD=Alt 1, SCL=Alt 1, SDA=Alt 1 */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PB0/ANA0/T0IN0              GP0    Expansion slots
+   * PB1/ANA1/T0IN1              GP1    Expansion slots
+   * PB2/ANA2/T0IN2              GP2    Expansion slots
+   * PB3/ANA3/OPOUT              GP3    Expansion slots
+   * PB4/ANA4                    GP4    Expansion slots
+   * PB5/ANA5                    GP5    Expansion slots
+   * PB6/ANA6/OPINP/CINN         GP6    Expansion slots
+   * PB7/ANA7/OPINN              GP7    Expansion slots
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0xff, Z16F_GPIOB_DD);  /* Inputs: all */
+  putreg8(0xff, Z16F_GPIOB_HDE); /* High drive current: all */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PC0/T1IN/T1OUT/DMA1REQ/CINN GP10   PS/2 / GPIO, Expansion slots
+   * PC1/T1OUT/DMA1ACK/COMPOUT   GP11   PS/2 / GPIO, Expansion slots
+   * PC2/SS/CS4                  ~EXP   Expansion slots
+   * PC3/SCK/DMA2REQ             SCK    FT800Q, Serial memory (1), RF Transceiver (1),
+   *                                    Expansion slots, SD0, 1, and 2
+   * PC4/MOSI/DMA2ACK            MOSI   FT800Q, Serial memory (1), RF Transceiver (1),
+   *                                    Expansion slots, SD0, 1, and 2
+   * PC5/MISO/CS5                MISO   FT800Q, Serial memory (1), RF Transceiver (1),
+   *                                    Expansion slots, SD0, 1, and 2
+   * PC6/T2IN/T2OUT/PWMH0        ~CTS   MAX3232D RS-232
+   * PC7/T2OUT/PWML0             ~RTS   MAX3232D RS-232, Power section (?)
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0x63, Z16F_GPIOC_DD);  /* Inputs: GP10, GP11, MISO, and ~CTS */
+  putreg8(0x03, Z16F_GPIOC_HDE); /* High drive current: GP10 and GP11 */
+  putreg8(0x38, Z16F_GPIOC_AFL); /* SCK=Alt 1, MOSI=Alt 1, MISO=Alt 1 */
+  putreg8(0x04, Z16F_GPIOC_OUT); /* ~EXP output high */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PD0/PWMH1/ADR20             A20    RAM, Expansion slots
+   * PD1/PWML1/ADR21             A21    RAM, Expansion slots
+   * PD2/PWMH2/ADR22             A22    RAM, Expansion slots
+   * PD3/DE1/ADR16               A16    RAM, Expansion slots
+   * PD4/RXD1/ADR18              A18    RAM, Expansion slots
+   * PD5/TXD1/ADR19              A19    RAM, Expansion slots
+   * PD6/CTS1/ADR17              A17    RAM, Expansion slots
+   * PD7/PWML2/ADR23             A23    Expansion slots
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0x00, Z16F_GPIOD_DD);  /* Inputs: None */
+  putreg8(0xff, Z16F_GPIOD_AFH); /* All=Alt 2
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PE0/DATA0                   D0     RAM, Expansion slots
+   * PE1/DATA1                   D1     RAM, Expansion slots
+   * PE2/DATA2                   D2     RAM, Expansion slots
+   * PE3/DATA3                   D3     RAM, Expansion slots
+   * PE4/DATA4                   D4     RAM, Expansion slots
+   * PE5/DATA5                   D5     RAM, Expansion slots
+   * PE6/DATA6                   D6     RAM, Expansion slots
+   * PE7/DATA7                   D7     RAM, Expansion slots
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0xff, Z16F_GPIOE_DD); /* Inputs: all */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PF0/ADR0                    A0     Expansion slots
+   * PF1/ADR1                    A1     RAM, Expansion slots
+   * PF2/ADR2                    A2     RAM, Expansion slots
+   * PF3/ADR3                    A3     RAM, Expansion slots
+   * PF4/ADR4                    A4     RAM, Expansion slots
+   * PF5/ADR5                    A5     RAM, Expansion slots
+   * PF6/ADR6                    A6     RAM, Expansion slots
+   * PF7/ADR7                    A7     RAM, Expansion slots
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0x00, Z16F_GPIOF_DD);  /* Inputs: None */
+  putreg8(0xff, Z16F_GPIOF_AFL); /* All=Alt 1 */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PG0/ADR0                    A8     RAM, Expansion slots
+   * PG1/ADR0                    A9     RAM, Expansion slots
+   * PG2/ADR0                    A10    RAM, Expansion slots
+   * PG3/ADR0                    A11    RAM, Expansion slots
+   * PG4/ADR0                    A12    RAM, Expansion slots
+   * PG5/ADR0                    A13    RAM, Expansion slots
+   * PG6/ADR0                    A14    RAM, Expansion slots
+   * PG7/ADR0                    A15    RAM, Expansion slots
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0x00, Z16F_GPIOG_DD);  /* Inputs: None */
+  putreg8(0xff, Z16F_GPIOG_AFL); /* All=Alt 1 */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PH0/ANA8/WR                 ~WR    RAM, Expansion slots
+   * PH1/ANA9/RD                 ~RD    RAM, Expansion slots
+   * PH2/ANA10/CS0               ~RF    LED3, RF transceiver, X2 (1)
+   * PH3/ANA11/CINP/WAIT         ~SXM   LED4, Chip select for the serial memory, U4 (1)
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0xf0, Z16F_GPIOH_DD);  /* Inputs: None (PH4-PH7 undefined) */
+  putreg8(0x03, Z16F_GPIOH_AFH); /*~WR=Alt2 ~RD=Alt 2 */
+  putreg8(0x0c, Z16F_GPIOH_OUT); /* Output high: ~RF and ~SXM */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PJ0/DATA8                   ~SD1   LED5, Chip select for the SD card 1, X11.
+   * PJ1/DATA9                   ~DT1   Card detect for SD card 1
+   * PJ2/DATA10                  WP1    Write protect for SD card 1
+   * PJ3/DATA11                  EVE    EVE chip select
+   * PJ4/DATA12                  ~SD2   LED6, Chip select for the SD card 2, X10.
+   * PJ5/DATA13                  ~DT2   Card detect for SD card 2
+   * PJ6/DATA14                  WP2    Write protect for SD card 2
+   * PJ7/DATA15                  ~SD0   LED7, Chip select for the microSD 0, X12.
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0x66, Z16F_GPIOJ_DD);  /* Inputs: ~DT1, WP1, ~DT2, and WP2 */
+  putreg8(0x99, Z16F_GPIOJ_OUT); /* Output high:  ~SD1, EVE, ~SD2, ~SD0 */
+
+  /* --------------------------- ------ --------------------------------------------
+   * GPIO                        SIGNAL On-Board Connections
+   * --------------------------- ------ --------------------------------------------
+   * PK0/BHEN                    ~BHE   RAM, Expansion slots
+   * PK1/BLEN                    ~BLE   RAM, Expansion slots
+   * PK2/CS0                     ~0000  Bottom RAM bank, Expansion slots
+   * PK3/CS1                     ~8000  Top RAM bank, Expansion slots
+   * PK4/CS2                     ~F000  Expansion slots
+   * PK5/CS3                     ~FFC8  Expansion slots
+   * PK6/CS4                     ~FFD0  Expansion slots
+   * PK7/CS5                     ~FFD8  Expansion slots
+   * --------------------------- ------ --------------------------------------------
+   */
+
+  putreg8(0x00, Z16F_GPIOK_DD);  /* Inputs: None */
+  putreg8(0xff, Z16F_GPIOK_AFL); /* All=Alt 1 */
+}
+
+/***************************************************************************
+ * Public Functions
+ ***************************************************************************/
+
+/***************************************************************************
+ * Name: z16f_lowinit
+ ***************************************************************************/
+
+void z16f_lowinit(void)
+{
+  z16f_extcsinit();  /* Configure external memory */
+  z16f_gpioinit();   /* Configure board GPIOs */
+}
diff --git a/misc/Obsoleted/configs/16z/tools/dopatch.sh b/misc/Obsoleted/configs/16z/tools/dopatch.sh
new file mode 100755
index 000000000..1193ff792
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/tools/dopatch.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+############################################################################
+# configs/16z/tools/dopatch.sh
+#
+#   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+USAGE="${0} [-R] \$PWD"
+WD=`pwd`
+TOOLDIR=${WD}/configs/16z/tools
+ME=${TOOLDIR}/dopatch.sh
+PATCH=${TOOLDIR}/zneo-zdsii-5_0_1-variadic-func-fix.patch
+ARGS=${1}
+
+if [ ! -x ${ME} ]; then
+  echo "ERROR:  This script must be executed from the top-level NuttX directory"
+  echo ${USAGE}
+  exit 1
+fi
+
+if [ ! -r ${PATCH} ]; then
+  echo "ERROR: Readable patch not found at ${PATCH}"
+  echo ${USAGE}
+  exit 1
+fi
+
+cd .. || \
+  { echo "ERROR: failed to CD to the parent directory"; exit 1; }
+
+cat ${PATCH} | patch ${ARGS} -p1 || \
+  { echo "ERROR: patch failed" ; exit 1; }
diff --git a/misc/Obsoleted/configs/16z/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch b/misc/Obsoleted/configs/16z/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch
new file mode 100644
index 000000000..3dc9c87c5
--- /dev/null
+++ b/misc/Obsoleted/configs/16z/tools/zneo-zdsii-5_0_1-variadic-func-fix.patch
@@ -0,0 +1,187 @@
+diff --git a/apps/nshlib/nsh_console.c b/apps/nshlib/nsh_console.c
+index ba7dbe7..45e4ab1 100644
+--- a/apps/nshlib/nsh_console.c
++++ b/apps/nshlib/nsh_console.c
+@@ -46,6 +46,7 @@
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <string.h>
++#include <stdarg.h>
+ #include <assert.h>
+ #include <errno.h>
+ #include <debug.h>
+@@ -79,8 +80,13 @@ static FAR struct nsh_vtbl_s *nsh_consoleclone(FAR struct nsh_vtbl_s *vtbl);
+ static void nsh_consolerelease(FAR struct nsh_vtbl_s *vtbl);
+ static ssize_t nsh_consolewrite(FAR struct nsh_vtbl_s *vtbl,
+   FAR const void *buffer, size_t nbytes);
++#if 0
+ static int nsh_consoleoutput(FAR struct nsh_vtbl_s *vtbl,
+   FAR const char *fmt, ...);
++#else
++static int nsh_consolevoutput(FAR struct nsh_vtbl_s *vtbl,
++  FAR const char *fmt, va_list ap);
++#endif
+ static FAR char *nsh_consolelinebuffer(FAR struct nsh_vtbl_s *vtbl);
+ 
+ #if CONFIG_NFILE_DESCRIPTORS > 0
+@@ -213,6 +219,7 @@ static ssize_t nsh_consolewrite(FAR struct nsh_vtbl_s *vtbl, FAR const void *buf
+  *
+  ****************************************************************************/
+ 
++#if 0
+ static int nsh_consoleoutput(FAR struct nsh_vtbl_s *vtbl,
+                              FAR const char *fmt, ...)
+ {
+@@ -263,6 +270,51 @@ static int nsh_consoleoutput(FAR struct nsh_vtbl_s *vtbl,
+ #endif
+ }
+ 
++#else
++static int nsh_consolevoutput(FAR struct nsh_vtbl_s *vtbl, FAR const char *fmt, va_list ap)
++{
++#if CONFIG_NFILE_DESCRIPTORS > 0
++  FAR struct console_stdio_s *pstate = (FAR struct console_stdio_s *)vtbl;
++  int ret;
++
++  /* The stream is open in a lazy fashion.  This is done because the file
++   * descriptor may be opened on a different task than the stream.  The
++   * actual open will then occur with the first output from the new task.
++   */
++
++  if (nsh_openifnotopen(pstate) != 0)
++   {
++     return ERROR;
++   }
++
++  ret = vfprintf(pstate->cn_outstream, fmt, ap);
++
++  return ret;
++#else
++  char *str;
++
++  /* Use avsprintf() to allocate a buffer and fill it with the formatted
++   * data
++   */
++
++  str = NULL;
++  (void)avsprintf(&str, fmt, ap);
++
++  /* Was a string allocated? */
++
++  if (str)
++    {
++      /* Yes.. Print then free the allocated string */
++
++      printf("%s", str);
++      free(str);
++    }
++
++  return 0;
++#endif
++}
++#endif
++
+ /****************************************************************************
+  * Name: nsh_consolelinebuffer
+  *
+@@ -452,7 +504,11 @@ FAR struct console_stdio_s *nsh_newconsole(void)
+       pstate->cn_vtbl.release    = nsh_consolerelease;
+ #endif
+       pstate->cn_vtbl.write      = nsh_consolewrite;
++#if 0
+       pstate->cn_vtbl.output     = nsh_consoleoutput;
++#else
++      pstate->cn_vtbl.voutput    = nsh_consolevoutput;
++#endif
+       pstate->cn_vtbl.linebuffer = nsh_consolelinebuffer;
+       pstate->cn_vtbl.exit       = nsh_consoleexit;
+ 
+@@ -489,3 +545,15 @@ FAR struct console_stdio_s *nsh_newconsole(void)
+     }
+   return pstate;
+ }
++
++int nsh_output(FAR struct nsh_vtbl_s *vtbl, FAR const char *fmt, ...)
++{
++  va_list ap;
++  int ret;
++
++  va_start(ap, fmt);
++  ret = vtbl->voutput(vtbl, fmt, ap);
++  va_end(ap);
++
++  return ret;
++}
+diff --git a/apps/nshlib/nsh_console.h b/apps/nshlib/nsh_console.h
+index c78362f..207f9b9 100644
+--- a/apps/nshlib/nsh_console.h
++++ b/apps/nshlib/nsh_console.h
+@@ -47,6 +47,7 @@
+ #include <stdio.h>
+ #include <stdint.h>
+ #include <stdbool.h>
++#include <stdarg.h>
+ #include <errno.h>
+ 
+ /****************************************************************************
+@@ -62,11 +63,13 @@
+ #define nsh_undirect(v,s)      (v)->undirect(v,s)
+ #define nsh_exit(v,s)          (v)->exit(v,s)
+ 
++#if 0
+ #ifdef CONFIG_CPP_HAVE_VARARGS
+ # define nsh_output(v, ...)    (v)->output(v, ##__VA_ARGS__)
+ #else
+ # define nsh_output            vtbl->output
+ #endif
++#endif
+ 
+ /* Size of info to be saved in call to nsh_redirect */
+ 
+@@ -107,7 +110,11 @@ struct nsh_vtbl_s
+   void (*release)(FAR struct nsh_vtbl_s *vtbl);
+ #endif
+   ssize_t (*write)(FAR struct nsh_vtbl_s *vtbl, FAR const void *buffer, size_t nbytes);
++#if 0
+   int (*output)(FAR struct nsh_vtbl_s *vtbl, FAR const char *fmt, ...);
++#else
++  int (*voutput)(FAR struct nsh_vtbl_s *vtbl, FAR const char *fmt, va_list ap);
++#endif
+   FAR char *(*linebuffer)(FAR struct nsh_vtbl_s *vtbl);
+ #if CONFIG_NFILE_DESCRIPTORS > 0
+   void (*redirect)(FAR struct nsh_vtbl_s *vtbl, int fd, FAR uint8_t *save);
+@@ -159,5 +166,6 @@ struct console_stdio_s
+ /* Defined in nsh_console.c *************************************************/
+ 
+ FAR struct console_stdio_s *nsh_newconsole(void);
++int nsh_output(FAR struct nsh_vtbl_s *vtbl, FAR const char *fmt, ...);
+ 
+ #endif /* __APPS_NSHLIB_NSH_CONSOLE_H */
+diff --git a/nuttx/include/wdog.h b/nuttx/include/nuttx/wdog.h
+index 0aa3584..ac4a36a 100644
+--- a/nuttx/include/nuttx/wdog.h
++++ b/nuttx/include/nuttx/wdog.h
+@@ -74,7 +74,23 @@ typedef union wdparm_u wdparm_t;
+  * watchdog function expires.  Up to four parameters may be passed.
+  */
+ 
++#if 0
+ typedef CODE void (*wdentry_t)(int argc, uint32_t arg1, ...);
++#elif CONFIG_MAX_WDOGPARMS < 1
++typedef CODE void (*wdentry_t)(int argc);
++#elif CONFIG_MAX_WDOGPARMS < 2
++typedef CODE void (*wdentry_t)(int argc, uint32_t arg1);
++#elif CONFIG_MAX_WDOGPARMS < 3
++typedef CODE void (*wdentry_t)(int argc, uint32_t arg1, uint32_t arg2);
++#elif CONFIG_MAX_WDOGPARMS < 4
++typedef CODE void (*wdentry_t)(int argc, uint32_t arg1, uint32_t arg2,
++                               uint32_t arg3);
++#elif CONFIG_MAX_WDOGPARMS < 5
++typedef CODE void (*wdentry_t)(int argc, uint32_t arg1, uint32_t arg2,
++                               uint32_t arg3, uint32_t arg4);
++#else
++#  error Ooops.  CONFIG_MAX_WDOGPARMS > 4
++#endif
+ 
+ /* Watchdog 'handle' */
+