diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-12-09 17:03:16 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2011-12-09 17:03:16 +0000 |
commit | 88f3c3ba8d3161537032f2390936047c0535dce9 (patch) | |
tree | d13d6f30d8434fcb973fe397ebe500632dd7e314 /nuttx/configs/stm3240g-eval/nsh/defconfig | |
parent | 1a79f640a822bd01d8ef8149c5f0d3e793d65b88 (diff) | |
download | px4-nuttx-88f3c3ba8d3161537032f2390936047c0535dce9.tar.gz px4-nuttx-88f3c3ba8d3161537032f2390936047c0535dce9.tar.bz2 px4-nuttx-88f3c3ba8d3161537032f2390936047c0535dce9.zip |
Add PHY setup for STM3240G-EVAL Ethernet driver
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4151 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/stm3240g-eval/nsh/defconfig')
-rwxr-xr-x | nuttx/configs/stm3240g-eval/nsh/defconfig | 33 |
1 files changed, 31 insertions, 2 deletions
diff --git a/nuttx/configs/stm3240g-eval/nsh/defconfig b/nuttx/configs/stm3240g-eval/nsh/defconfig index 490b32a7b..ce69e0295 100755 --- a/nuttx/configs/stm3240g-eval/nsh/defconfig +++ b/nuttx/configs/stm3240g-eval/nsh/defconfig @@ -258,15 +258,44 @@ CONFIG_SSI_POLLWAIT=y # # STM32F40xxx Ethernet device driver settings # +# CONFIG_STM32_PHYADDR - The 5-bit address of the PHY on the board # CONFIG_STM32_MII - Support Ethernet MII interface # CONFIG_STM32_MII_MCO1 - Use MCO1 to clock the MII interface # CONFIG_STM32_MII_MCO2 - Use MCO2 to clock the MII interface # CONFIG_STM32_RMII - Support Ethernet RMII interface -# +# CONFIG_STM32_AUTONEG - Use PHY autonegotion to determine speed and mode +# CONFIG_STM32_ETHFD - If CONFIG_STM32_AUTONEG is not defined, then this +# may be defined to select full duplex mode. Default: half-duplex +# CONFIG_STM32_ETH100MBPS - If CONFIG_STM32_AUTONEG is not defined, then this +# may be defined to select 100 MBps speed. Default: 10 Mbps +# CONFIG_STM32_PHYSR - This must be provided if CONFIG_STM32_AUTONEG is +# defined. The PHY status register address may diff from PHY to PHY. This +# configuration sets the address of the PHY status register. +# CONFIG_STM32_PHYSR_SPEED - This must be provided if CONFIG_STM32_AUTONEG is +# defined. This provides bit mask indicating 10 or 100MBps speed. +# CONFIG_STM32_PHYSR_100MBPS - This must be provided if CONFIG_STM32_AUTONEG is +# defined. This provides the value of the speed bit(s) indicating 100MBps speed. +# CONFIG_STM32_PHYSR_MODE - This must be provided if CONFIG_STM32_AUTONEG is +# defined. This provide bit mask indicating full or half duplex modes. +# CONFIG_STM32_PHYSR_FULLDUPLEX - This must be provided if CONFIG_STM32_AUTONEG is +# defined. This provides the value of the mode bits indicating full duplex mode. +# CONFIG_STM32_ETH_PTP - Precision Time Protocol (PTP). Not supported +# but some hooks are indicated with this condition. +# +CONFIG_STM32_PHYADDR=0x01 CONFIG_STM32_MII=y CONFIG_STM32_MII_MCO1=y CONFIG_STM32_MII_MCO2=n CONFIG_STM32_RMII=n +CONFIG_STM32_AUTONEG=y +#CONFIG_STM32_ETHFD +#CONFIG_STM32_ETH100MB +CONFIG_STM32_PHYSR=16 +CONFIG_STM32_PHYSR_SPEED=0x0002 +CONFIG_STM32_PHYSR_100MBPS=0x0000 +CONFIG_STM32_PHYSR_MODE=0x0004 +CONFIG_STM32_PHYSR_FULLDUPLEX=0x0004 +CONFIG_STM32_ETH_PTP=n # # General build options @@ -684,7 +713,7 @@ CONFIG_NET=n CONFIG_NET_IPv6=n CONFIG_NSOCKET_DESCRIPTORS=10 CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 +CONFIG_NET_BUFSIZE=562 CONFIG_NET_TCP=y CONFIG_NET_TCP_CONNS=40 CONFIG_NET_MAX_LISTENPORTS=40 |