aboutsummaryrefslogtreecommitdiff
path: root/ROMFS/px4fmu_common/init.d/rc.usb
Commit message (Expand)AuthorAgeFilesLines
* USB: Crank up bus speed a bitLorenz Meier2015-04-261-1/+1
* Remove attitude quaternion as long as mavlink conversions are still not inLorenz Meier2015-02-151-1/+0
* Improve multi-stream handling by template and index usage. Can be consolidate...mavlink_act_ctrlLorenz Meier2015-02-131-1/+1
* Set up ACTUATOR_CONTROL_TARGET message and stream rate correctlyLorenz Meier2015-02-131-1/+1
* Set optical flow message correctly on startupLorenz Meier2015-02-131-1/+2
* Remove sleeps from USB config as these are really not neededLorenz Meier2015-02-101-11/+2
* send MANUAL_CONTROL stream over usbThomas Gubler2015-01-041-0/+2
* Enable TELEM2 MAVLink, forward local pos at 30 Hz if connected via USBLorenz Meier2014-08-211-0/+1
* mavlink: stream names updated in configurationAnton Babushkin2014-08-131-1/+1
* mavlink, rc.usb: increase HIL_CONTROLS rate and datarate on USB to allow HIL ...Anton Babushkin2014-07-311-1/+1
* rc.usb: set RC_CHANNELS_RAW rate to 5HzAnton Babushkin2014-07-291-0/+2
* rcS: set rates for parameters and missions on USB connectionAnton Babushkin2014-07-251-0/+4
* merged masterLorenz Meier2014-06-261-0/+2
|\
| * mavlink: report global position setpoint and do this always no just when upda...Julian Oes2014-06-101-0/+2
* | Support link forwardingLorenz Meier2014-06-081-1/+1
|/
* USB startup: Give NuttX enough time to tear down an app and free memory befor...Lorenz Meier2014-05-151-6/+6
* startup: NuttX seems to free memory only AFTER the next command is issued, re...Lorenz Meier2014-05-151-0/+6
* Increase servo out rate via USBLorenz Meier2014-05-141-3/+1
* Reducing VFR and HUD update rates, we do not need 100 Hz for 30 Hz human visionLorenz Meier2014-03-241-0/+2
* Fixed the HIL actuator range to what it should beLorenz Meier2014-03-231-1/+2
* rc.usb: typo fixedAnton Babushkin2014-03-211-1/+1
* Implemented last missing messages, added stream config for USB, made stream c...Lorenz Meier2014-03-211-0/+4
* rc.usb: increase data rate to 10000bytes/s for USBAnton Babushkin2014-03-111-1/+1
* mavlink: HIL fixes, performance optimizationAnton Babushkin2014-03-011-1/+1
* mavlink: -r (datarate) parameter implemented, minor fixesAnton Babushkin2014-02-271-1/+1
* Stop the through hoop jumping now that we can handle multiple interfacesLorenz Meier2014-02-021-31/+0
* Merged beta into mavlink rework branchLorenz Meier2014-01-281-33/+0
* Fixed (temporarily) HIL by allowing index 1000 to start a matching setupLorenz Meier2013-09-081-8/+0
* Hotfix: Cleanup on startup scriptsLorenz Meier2013-08-311-0/+8
* Fixed startup behavior for PX4 autostartLorenz Meier2013-08-111-0/+14
* Hotfix: Added missing drivers to USB startupLorenz Meier2013-08-021-0/+5
* More USB startup fixingLorenz Meier2013-08-021-0/+6
* Fixed USB startupLorenz Meier2013-08-021-20/+20
* Simplified USB startup scriptLorenz Meier2013-07-181-17/+21
* Hotfix: Ensured there are never two filters running at the same time if auto-...Lorenz Meier2013-07-181-2/+9
* Lunchtime HOTFIX: Bring back USB console to operational, allow single-USB con...Lorenz Meier2013-07-181-1/+26
* Merge branch 'master' into export-buildpx4dev2013-04-261-0/+14
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 04:57:52 +0000